From 283625701538289ab929f55a8deb6d7f79691e10 Mon Sep 17 00:00:00 2001
From: RobertJDavis <davisrob85@gmail.com>
Date: Fri, 31 Oct 2025 10:56:43 -0700
Subject: [PATCH] 10x registers

Modified to 10x registers: Supply Temp, Return Temp, Return Humidity.
Changed Supply and Return Temp in RunningState for PID strategy to work.
---
 .../State_Running.cpp                          | 14 ++++++++++++++
 .../PHX3_CRAH_LIEBERT_80_SLAB_TCP/config.h     | 18 +++++++++---------
 2 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/State_Running.cpp b/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/State_Running.cpp
index d0ce726..33c87c7 100644
--- a/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/State_Running.cpp
+++ b/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/State_Running.cpp
@@ -89,6 +89,20 @@ State<ModbusIP>* RunningState<ModbusIP>::update(Equipment<ModbusIP>* equipment)
         return new StandbyState<ModbusIP>();
     }
 
+    // Due to 10x scaling of Supply and Return Air Temps, need to adjust for PID strategies
+    float returnTemp = getPointValue(equipment, "Return Air Temp")/10;
+    float supplyTemp = getPointValue(equipment, "Supply Air Temp")/10;
+    float returnTempSP = getPointValue(equipment, "Return Air Temp Setpoint");
+    float supplyTempSP = getPointValue(equipment, "Supply Air Temp Setpoint");
+
+    Strategy_Behavior* FluidControlValve1_strat = getStrategy("Fluid Control Valve Position 1");
+    Strategy_Behavior* FluidControlValve2_strat = getStrategy("Fluid Control Valve Position 2");
+    Strategy_Behavior* FanSpeed_strat = getStrategy("Fan Speed");
+    static_cast<PIDStrategy*>(FluidControlValve1_strat)->setLimits(supplyTempSP, supplyTemp);
+    static_cast<PIDStrategy*>(FluidControlValve2_strat)->setLimits(supplyTempSP, supplyTemp);
+    static_cast<PIDStrategy*>(FanSpeed_strat)->setLimits(returnTempSP, returnTemp);
+    
+
     // Apply any strategies defined for the standby state
     _applyStrategies(equipment);
     return nullptr;
diff --git a/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/config.h b/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/config.h
index f1040fb..f547b18 100644
--- a/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/config.h
+++ b/src/BMS/CRAH/PHX3_CRAH_LIEBERT_80_SLAB_TCP/config.h
@@ -136,16 +136,16 @@ modbusMap mb_map[] =
   {DI,        741,     0,      "Alarm Compressor 2B Overload"},
 
   {IR,        99,     0,       "Unit Status"},           // 0:off, 1:on, 2:standby
-  {IR,        102,     0,       "Fan Speed"},
-  {IR,        129,     0,       "Return Humidity"},
-  {IR,        742,     0,       "Return Air Temp"},
-  {IR,        743,     0,       "Supply Air Temp"},
-  {IR,        1465,     0,       "Supply Air Flow"},
-  {IR,        2050,     0,       "Fluid Control Valve Position 1"},
-  {IR,        2051,     0,       "Fluid Control Valve Position 2"},
+  {IR,        102,     0,      "Fan Speed"},
+  {IR_10x,    129,     0,      "Return Humidity"},
+  {IR_10x,    742,     0,      "Return Air Temp"},
+  {IR_10x,    743,     0,      "Supply Air Temp"},
+  {IR,        1465,     0,     "Supply Air Flow"},
+  {IR,        2050,     0,     "Fluid Control Valve Position 1"},
+  {IR,        2051,     0,     "Fluid Control Valve Position 2"},
 
-  {HR,        732,     73,       "Supply Air Temp Setpoint"},
-  {HR,        753,     80,       "Return Air Temp Setpoint"},
+  {HR,        732,     73,     "Supply Air Temp Setpoint"},
+  {HR,        753,     80,     "Return Air Temp Setpoint"},
 };
 //Size of modbus map used in FOR cycles, automatically calculated.