Chiller daikin logic added

src/00_Base_TCP/State_Standby.cpp

@@ -0,0 +1,85 @@
+/**
+ * @file State_Standby.cpp
+ * @brief Implementation of the StandbyState class.
+ * @author Emmanuel Hernandez Cruz
+ * @date 2025-09-05
+ *
+ * This file contains the implementation for the StandbyState, which defines
+ * the behavior of the equipment when it is in an idle or standby mode.
+ */
+#include "ModbusPoints/Modbus_Point.h"
+#include "ModbusPoints/Modbus_FloatDecorator.h"
+#include "Equipment/Equipment.h"
+#include "Strategies/Strategy_Ramp.h"
+#include "Strategies/Strategy_Random.h"
+#include "Strategies/Strategy_Saw.h"
+#include "Strategies/Strategy_SingleValue.h"
+#include "Strategies/Strategy_Square.h"
+#include "Strategies/Strategy_PID.h"
+#include "States/State_Standby.h"
+#include "States/State_Running.h"
+#include "States/State_Fail.h"
+#include "States/State.h"
+#include <vector>
+#include <string>
+#if defined(USE_MODBUS_IP)
+  #include <ModbusIP_ESP8266.h>
+#else
+  #include <ModbusRTU.h>
+#endif
+/**
+ * @brief Constructs a new StandbyState object.
+ *
+ * In this state, the equipment is idle. This constructor initializes strategies
+ * to bring the system to a safe, idle condition. It sets a stable value for
+ * the SAT reading and creates ramp strategies to bring the CW valve and all
+ * EC fan speeds down to zero.
+ */
+template<>
+StandbyState<ModbusIP>::StandbyState() {
+    // You can add initialization code here if needed
+    
+
+}
+
+/**
+ * @brief Executes the standby state's logic for one update cycle.
+ *
+ * This method applies the strategies defined for the standby state (e.g.,
+ * ramping values to zero).
+ *
+ * @warning This method currently does not check for a command to transition to the
+ *          Running state. This logic needs to be added to allow the unit to start.
+ * @return A pointer to a new State if a transition should occur, otherwise nullptr.
+ */
+template<>
+State<ModbusIP>* StandbyState<ModbusIP>::update(Equipment<ModbusIP>* equipment) {
+    // STATE control, add conditions if change to a different state is needed
+    Serial.println("Standby update function");
+    
+    // Apply any strategies defined for the standby state
+    _applyStrategies(equipment);
+    return nullptr;
+}
+
+/**
+ * @brief Logic to execute once when entering the standby state.
+ * This method performs cleanup by setting all alarm points and all EC fan
+ * run status points to 0.
+ * @param equipment Pointer to the Equipment instance.
+ */
+template<>
+void StandbyState<ModbusIP>::enterState(Equipment<ModbusIP>* equipment) {
+    // Logic to run when the equipment enters this state
+    Serial.println("Enter Standby State...");
+}
+
+/**
+ * @brief Logic to execute once when exiting the standby state.
+ * @param equipment Pointer to the Equipment instance.
+ */
+template<>
+void StandbyState<ModbusIP>::exitState(Equipment<ModbusIP>* equipment) {
+    // Cleanup logic to run when the equipment leaves this state
+    Serial.println("Exit Standby State...");
+}