diff --git a/formats/controlexpert/builtins.xsy b/formats/controlexpert/builtins.xsy new file mode 100644 index 0000000..3a20031 --- /dev/null +++ b/formats/controlexpert/builtins.xsy @@ -0,0 +1,597 @@ + + + + + + Parameters for PI_B function block + + + Reserved for autotuning + + + Lower limit of the process value range + + + Upper limit of the process value range + + + Lower limit of the output value range + + + Upper limit of the output value range + + + 0: direct action of the PID controller 1: opposite action of the PID controller + + + + 1: the RCPY input is used + + + + Proportional contribution (gain) + + + Integral time + + + Dead zone on deviation + + + Manual adjustment of static deviation + + + + + + + + Analog input value + + + Forced value + + + Force command + + + Forced state + + + Physical value + + + + + + + + Function type + + + Channel health + + + Channel warning + + + + + + Measurement status word + + + Aligned channel + + + + Measurement within lower tolerance zone + + + + Measurement within upper tolerance zone + + + + Internal offset error + + + + Internal reference error + + + + Power supply error + + + + SPI communication error + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Analog output value + + + Forced Value + + + Force command + + + Forced state + + + Physical value + + + + + + + + Function type + + + Channel health + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Channel health + + + Discrete input value + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Channel health + + + Discrete output value + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Module health + + + Module faults + + + + + + + + + + + Channel error + + + Discrete input value + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/formats/controlexpert/flatten_xsy.xslt b/formats/controlexpert/flatten_xsy.xslt new file mode 100644 index 0000000..e298172 --- /dev/null +++ b/formats/controlexpert/flatten_xsy.xslt @@ -0,0 +1,31 @@ + + + + + + + + + + + + + + + + + + + + . + + + : + + + + \ No newline at end of file diff --git a/formats/controlexpert/read_xsy.py b/formats/controlexpert/read_xsy.py new file mode 100644 index 0000000..602583b --- /dev/null +++ b/formats/controlexpert/read_xsy.py @@ -0,0 +1,11 @@ +import xml.etree.ElementTree as et +import pandas as pd + +def get_ + +def main(inputfile): + root = et.parse(inputfile) + dataBlock = root.find('dataBlock') + +if __name__ == '__main__': + main('builtins.xsy') \ No newline at end of file diff --git a/formats/controlexpert/test/filter_master.xsy b/formats/controlexpert/test/filter_master.xsy new file mode 100644 index 0000000..1440eb7 --- /dev/null +++ b/formats/controlexpert/test/filter_master.xsy @@ -0,0 +1,40614 @@ + + + + + + + + + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + + TRUE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + TRUE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + 16#0000 + + + + TRUE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + TRUE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + + 256 + + + FALSE + + + FALSE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + 20 + + + FALSE + + + FALSE + + + FALSE + + + 0 + + + 0 + + + FALSE + + + TRUE + + + TRUE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + FALSE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + System in Cold Start Cycle + + + System in Warm Start Cycle + + + MAST - Fault Messages not read yet + + + PLC-6000-1 Global Reset Bit + + + First Scan Bit + + + + PLC Date - Month + + + + + PLC Date - Day + + + + + PLC Date - Year + + + + + PLC Time - Hour + + + + + PLC Time - Minute + + + + + PLC Time - Second + + + + + System Time - Used for Totalization + + + PLC Time - Seconds (Read by other PLCs) + + + Simulate Enable Bit + + + Filter Gallery Sump 1 Pump 1 Running + + + Filter Gallery Sump 1 Pump 2 Running + + + Filter Gallery Sump 1 High-High Level + + + Air Scour Blower 1 in Remote + + + Air Scour Blower 1 Running + + + Air Scour Blower 1 Overload + + + Air Scour Blower 1 Inlet Filter High Differential Pressure + + + Air Scour Blower 1 High Discharge Pressure + + + Air Scour Blower 1 High Temperature + + + Air Scour Blower 1 High Discharge Temperature + + + Air Compressor 1 Alarm + + + Filters Exhaust Fan 1 Fail + + + Filters MASTER PLC Enclosure 24VDC Power OK + + + Filters MASTER PLC Enclosure Intrusion Alarm + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 1 Module Fault + + + Filter Gallery Sump 1 Pump 1 Running Channel Fault + + + Filter Gallery Sump 1 Pump 2 Running Channel Fault + + + Filter Gallery Sump 1 High-High Level Channel Fault + + + Air Scour Blower 1 in Remote Channel Fault + + + Air Scour Blower 1 Running Channel Fault + + + Air Scour Blower 1 Overload Channel Fault + + + Air Scour Blower 1 Inlet Filter High Differential Pressure Channel Fault + + + Air Scour Blower 1 High Discharge Pressure Channel Fault + + + Air Scour Blower 1 High Temperature Channel Fault + + + Air Scour Blower 1 High Discharge Temperature Channel Fault + + + Air Compressor 1 Alarm Channel Fault + + + Filters Exhaust Fan 1 Fail Channel Fault + + + Filters MASTER PLC Enclosure 24VDC Power OK Channel Fault + + + Filters MASTER PLC Enclosure Intrusion Alarm Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + Filter Gallery Sump 2 Pump 1 Running + + + Filter Gallery Sump 2 Pump 2 Running + + + Filter Gallery Sump 2 High-High Level + + + Air Scour Blower 2 in Remote + + + Air Scour Blower 2 Running + + + Air Scour Blower 2 Overload + + + Air Scour Blower 2 Inlet Filter High Differential Pressure + + + Air Scour Blower 2 High Discharge Pressure + + + Air Scour Blower 2 High Temperature + + + Air Scour Blower 2 High Discharge Temperature + + + Air Compressor 2 Alarm + + + Filters Exhaust Fan 2 Fail + + + Filter Building Desiccant Air Dryer Alarm + + + SPARE + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 2 Module Fault + + + Filter Gallery Sump 2 Pump 1 Running Channel Fault + + + Filter Gallery Sump 2 Pump 2 Running Channel Fault + + + Filter Gallery Sump 2 High-High Level Channel Fault + + + Air Scour Blower 2 in Remote Channel Fault + + + Air Scour Blower 2 Running Channel Fault + + + Air Scour Blower 2 Overload Channel Fault + + + Air Scour Blower 2 Inlet Filter High Differential Pressure Channel Fault + + + Air Scour Blower 2 High Discharge Pressure Channel Fault + + + Air Scour Blower 2 High Temperature Channel Fault + + + Air Scour Blower 2 High Discharge Temperature Channel Fault + + + Air Compressor 2 Alarm Channel Fault + + + Filters Exhaust Fan 2 Fail Channel Fault + + + Filter Building Desiccant Air Dryer Alarm Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + Filter Gallery Sump 3 Pump 1 Running + + + Filter Gallery Sump 3 Pump 2 Running + + + Filter Gallery Sump 3 High-High Level + + + Filter Backwash Supply Control Valve Fully Open Status + + + Filter Backwash Supply Control Valve Fully Closed Status + + + Filter Backwash Supply Control Valve Alarm + + + Filter Effluent Sample - Low Flow Alarm + + + Filter Building Compressed Air Low Pressure + + + Filter Building SCADA NIP Panel Filters MASTER UPS Alarm + + + Filter Building SCADA NIP Panel Filters MASTER UPS On Battery + + + Filter Building SCADA NIP Panel Filters 1-6 UPS Alarm + + + Filter Building SCADA NIP Panel Filters 1-6 UPS On Battery + + + Filter Building SCADA NIP Panel Filters 7-12 UPS Alarm + + + Filter Building SCADA NIP Panel Filters 7-12 UPS On Battery + + + FIlter Backwash Supply Control Valve In Remote + + + Backwash Vent Control Valve In Remote + + + SCADA Drop 1 / Rack 0 / Slot 3 Module Fault + + + Filter Gallery Sump 3 Pump 1 Running Channel Fault + + + Filter Gallery Sump 3 Pump 2 Running Channel Fault + + + Filter Gallery Sump 3 High-High Level Channel Fault + + + Filter Backwash Supply Control Valve Fully Open Status Channel Fault + + + Filter Backwash Supply Control Valve Fully Closed Status Channel Fault + + + Filter Backwash Supply Control Valve Alarm Channel Fault + + + Filter Effluent Sample - Low Flow Alarm Channel Fault + + + Filter Building Compressed Air Low Pressure Channel Fault + + + Filter Building SCADA NIP Panel Filters MASTER UPS Alarm Channel Fault + + + Filter Building SCADA NIP Panel Filters MASTER UPS On Battery Channel Fault + + + FIlter Backwash Supply Control Valve In Remote Channel Fault + + + Backwash Vent Control Valve In Remote Channel Fault + + + Filter Building SCADA NIP Panel Filters 1-6 UPS Alarm Channel Fault + + + Filter Building SCADA NIP Panel Filters 1-6 UPS On Battery Channel Fault + + + Filter Building SCADA NIP Panel Filters 7-12 UPS Alarm Channel Fault + + + Filter Building SCADA NIP Panel Filters 7-12 UPS On Battery Channel Fault + + + Air Scour Blower 1 Run Command + + + Air Scour Blower 2 Run Command + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 5 Module Fault + + + Air Scour Blower 1 Run Command Channel Fault + + + Air Scour Blower 2 Run Command Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + Air Scour Blower 1 Discharge Pressure + + + Air Scour Blowers Air Flow + + + Backwash Air Vent Control Valve Position + + + Filter Effluent Sample - Turbidity + + + Filter Effluent Sample - pH + + + Filter Effluent Sample - Temperature + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 7 Module Fault + + + Air Scour Blower 1 Discharge Pressure Channel Fault + + + Air Scour Blowers Air Flow Channel Fault + + + Backwash Air Vent Control Valve Position Channel Fault + + + Filter Effluent Sample - Turbidity Channel Fault + + + Filter Effluent Sample - pH Channel Fault + + + Filter Effluent Sample - Temperature Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + Air Scour Blower 2 Discharge Pressure + + + Filter Backwash Supply Flow + + + Filter Backwash Supply Control Valve Position + + + Filter Building Compressed Air Pressure + + + Filter BW Supply Post-CTS Chlorine Residual + + + SPARE + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 8 Module Fault + + + Air Scour Blower 2 Discharge Pressure Channel Fault + + + Filter Backwash Supply Flow Channel Fault + + + Filter Backwash Supply Control Valve Position Channel Fault + + + Filter Building Compressed Air Pressure Channel Fault + + + Filter BW Supply Post-CTS Chlorine Residual Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + Backwash Air Vent Control Valve Position Setpoint + + + Filter Backwash Supply Control Valve Position Setpoint + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 10 Module Fault + + + Backwash Air Vent Control Valve Position Setpoint Channel Fault + + + Filter Backwash Supply Control Valve Position Setpoint Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + + + + + + + + SCADA Drop 1 / Rack 0 / Slot 1 Module Fault + + + 388 + + + 0 + + + 272 + + + 0 + + + 0 + + + 17786 + + + + 2 + + + 18072 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 16384 + + + 17692 + + + 10240 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 2 Module Fault + + + 404 + + + 0 + + + 0 + + + 17008 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 3 Module Fault + + + 260 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 288 + + + 0 + + + 17008 + + + 13107 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 5 Module Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 288 + + + 0 + + + 16727 + + + 13107 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 7 Module Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 25972 + + + 29811 + + + 0 + + + 250 + + + 21343 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 21343 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 8 Module Fault + + + 262 + + + 12288 + + + 20575 + + + 0 + + + 0 + + + 27713 + + + + 2 + + + 104 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + SCADA Drop 1 / Rack 0 / Slot 10 Module Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Filter Gallery Sump 1 High-High Level + + + 388 + + + 0 + + + 16 + + + 0 + + + 0 + + + 17786 + + + + 2 + + + 18072 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 17008 + + + 16384 + + + 17692 + + + 10240 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Scour Blower 1 Inlet Filter High Differential Pressure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 27496 + + + 26633 + + + 19488 + + + 28527 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 1 + + + 0 + + + 5 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Scour Blower 1 High Discharge Pressure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Scour Blower 1 High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Scour Blower 1 High Discharge Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Compressor 1 Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Filters Exhaust Fan 1 Fail + + + 4 + + + 0 + + + 5 + + + 0 + + + 0 + + + 5 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 16720 + + + 8192 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Filters MASTER PLC Enclosure 24VDC Power OK + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Filters MASTER PLC Enclosure Intrusion Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 61 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 26472 + + + 24 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + + + + + + + + + + + + + Filter Gallery Sump 2 High-High Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Air Scour Blower 2 Inlet Filter High Differential Pressure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 288 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Air Scour Blower 2 High Discharge Pressure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Air Scour Blower 2 High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Air Scour Blower 2 High Discharge Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Air Compressor 2 Alarm + + + 4 + + + 28672 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filters Exhaust Fan 2 Fail + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + + + + + + + + + + + Filter Gallery Sump 3 High-High Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Effluent Sample - Low Flow Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + -24576 + + + 18060 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building Compressed Air Low Pressure + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters MASTER UPS Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters MASTER UPS On Battery + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters 1-6 UPS Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters 1-6 UPS On Battery + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 16256 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters 7-12 UPS Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter Building SCADA NIP Panel Filters 7-12 UPS On Battery + + + 4 + + + 0 + + + 0 + + + 290 + + + 0 + + + 16727 + + + + 2 + + + 12336 + + + 16395 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 63 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Air Scour Blower 1 Discharge Pressure + + + 230 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 3996 + + + -0.00375 + + + -0.00375 + + + 0.0 + + + 15.0 + + + 4000.0 + + + 20000.0 + + + 13.0 + + + 12.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + Air Scour Blowers Air Flow + + + 224 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 4001 + + + 0.3125 + + + 0.3125 + + + 0.0 + + + 5000.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 1.568914E+008 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 16384 + + + 6432 + + + 4097 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 8224 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 16384 + + + 6432 + + + 4097 + + + 0 + + + 250 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 4097 + + + 8224 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0.3125 + + + 5000.0 + + + 0.05 + + + 0.0 + + + 768958.3 + + + 1.568914E+008 + + + 10 + + + 5103828.5 + + + 5103828.5 + + + 2.5 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 300.0 + + + 0.0 + + + 0.001041667 + + + 0.0 + + + 1.517876E+008 + + + 0 + + + + -1.0 + + + 0 + + + + + Backwash Air Vent Control Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 19966 + + + 99.7875 + + + 99.7875 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 16720 + + + 8250 + + + 12336 + + + 20575 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 120 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 16720 + + + 8250 + + + 12336 + + + 20575 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 63 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 6.771837E+022 + + + 5.788633E+022 + + + 26998 + + + 1.014187E-038 + + + 0.0 + + + 3.503246E-043 + + + + 120 + + + 0 + + + 5 + + + 0 + + + 30 + + + 0 + + + + 4.591775E-040 + + + 1.401298E-045 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + Filter Effluent Sample - Turbidity + + + 230 + + + 0 + + + 0 + + + 0 + + + 3 + + + 0 + + + 4136 + + + 0.04675 + + + 0.04675 + + + 0.0 + + + 5.5 + + + 4000.0 + + + 20000.0 + + + 0.144 + + + 0.12 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + Filter Effluent Sample - pH + + + 254 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 10477 + + + 6.428875 + + + 6.428875 + + + 4.0 + + + 10.0 + + + 4000.0 + + + 20000.0 + + + 8.2 + + + 8.0 + + + 5.0 + + + 4.8 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + Filter Effluent Sample - Temperature + + + 230 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 12006 + + + 82.0375 + + + 82.0375 + + + 32.0 + + + 132.0 + + + 4000.0 + + + 20000.0 + + + 100.0 + + + 90.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 4097 + + + 8224 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 8.285539E-024 + + + 4097 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 8.285539E-024 + + + 1.355782E-019 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + + + + + + + + Air Scour Blower 2 Discharge Pressure + + + 230 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 3998 + + + -0.001875 + + + -0.001875 + + + 0.0 + + + 15.0 + + + 4000.0 + + + 20000.0 + + + 13.0 + + + 12.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + Filter Backwash Supply Control Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4292 + + + 1.825 + + + 1.825 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 2800.0 + + + 20500.0 + + + 3000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 2 + + + 63 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 24594 + + + 25957 + + + 8292 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 5 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 63 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 24578 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 5 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 13107 + + + 12336 + + + 20575 + + + 0 + + + 0 + + + 27713 + + + 7172705 + + + 0.0 + + + 0.0 + + + 0.0 + + + 5.601965E-039 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 1.654239E-019 + + + + 20297 + + + 17952 + + + 30049 + + + 29804 + + + 0 + + + 0 + + + + 0.0 + + + 3.503246E-043 + + + 1.008935E-042 + + + 7.006492E-045 + + + 7.006492E-045 + + + 327680 + + + + -1.0 + + + 0 + + + + Filter Building Compressed Air Pressure + + + 230 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 13136 + + + 342.6 + + + 342.6 + + + 0.0 + + + 600.0 + + + 4000.0 + + + 20000.0 + + + 500.0 + + + 450.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 3072 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 5 + + + 1 + + + 2 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 12.5 + + + 12.5 + + + 1.567072E-041 + + + 0 + + + 15.0 + + + 0.0 + + + 8.2 + + + + 1 + + + 0 + + + 0 + + + 16128 + + + 10000 + + + 0 + + + + 0.1 + + + 0.0 + + + 4.173611E-008 + + + 5.850950E+007 + + + 1.109612E+027 + + + 1145655391 + + + + -1.0 + + + 0 + + + + + Filter Backwash Supply Flow + + + 224 + + + 0 + + + 2 + + + 0 + + + 2 + + + 0 + + + 3999 + + + -0.0045 + + + -0.0045 + + + 0.0 + + + 72.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 284.9102 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 16384 + + + 6432 + + + 4097 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 8224 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 16384 + + + 6432 + + + 4097 + + + 0 + + + 250 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 3 + + + -0.0045 + + + 72.0 + + + 0.1 + + + 0.0 + + + 1.278407 + + + 284.9102 + + + 10 + + + 8.16156 + + + 8.16156 + + + 0.072 + + + + 2022 + + + 1 + + + 10 + + + 13 + + + 2 + + + 0 + + + + 432000.0 + + + 0.0 + + + -1.041667E-008 + + + 0.0 + + + 276.7486 + + + 0 + + + + -1.0 + + + 0 + + + + + FAST - Fault Messages not read yet + + + FAST - First Scan Bit + + + + When Set to 1 enables automatic backup of current values + + + Set to 1 when the card is correct and the application is consistent with CPU Internal Application RAM + + + 1 means that the application backup is consistent + + + Set to 1 to start a backup operation (transfer application from RAM to card) + + + Set to 1 to replace initial values with current values + + + + + + + + + + + + + + + + Filters 1-6 Read Pulse + + + Filter Polling Abort + + + Filters 1-6 Read Active + + + Filters 1-6 Read Error + + + Filters 1-6 Read Success + + + Filters 1-6 Read Control Word + + + Read + 16#0002 + + + Error + 16#0000 + + + Length (125 registers) + 16#007D + + + Start Register (%MW400101) + 16#0065 + + + Card and Address (2 / 0) + 16#0200 + + + IP1 (192) + 16#00C0 + + + IP2 (168) + 16#00A8 + + + IP3 (116) + 16#0074 + + + IP4 (44) + 16#002C + + + + Filters 1-6 Read Data Buffer + + + + Last WDOG value received from the Filters 1-6 PLC + + + Filters 1-6 PLC Communication Failure Alarm + + + 13 + + + 16 + + + 19536 + + + 8259 + + + 20297 + + + 17952 + + + + 1035 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 14.62 + + + + + 6 + + + 0 + + + 0 + + + 5 + + + 1 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filters 7-12 Read Pulse + + + Filters 7-12 Read Active + + + Filters 7-12 Read Error + + + Filters 7-12 Read Success + + + Filters 7-12 Read Control Word + + + Read + 16#0002 + + + Error + 16#0000 + + + Length (125 registers) + 16#007D + + + Start Register (%MW400101) + 16#0065 + + + Card and Address (2 / 0) + 16#0200 + + + IP1 (192) + 16#00C0 + + + IP2 (168) + 16#00A8 + + + IP3 (116) + 16#0074 + + + IP4 (45) + 16#002D + + + + Filters 7-12 Read Data Buffer + + + Last WDOG value received from the Filters 7-12 PLC + + + Filters 7-12 PLC Communication Failure Alarm + + + 13 + + + 16 + + + 16727 + + + 13107 + + + 12848 + + + 16991 + + + + 15 + + + 13912 + + + 8201 + + + 24369 + + + 49 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 4.401 + + + + + 1026 + + + 8304 + + + 18457 + + + 16672 + + + 29289 + + + 4608 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Filter 1 Backwash Queue Item + + + Temporary Array used to convert Words to Ints + + + Filter 6 Backwash Queue Item + + + Filter 5 Backwash Queue Item + + + Filter 4 Backwash Queue Item + + + Filter 3 Backwash Queue Item + + + Filter 2 Backwash Queue Item + + + Filter 12 Backwash Queue Item + + + Filter 11 Backwash Queue Item + + + Filter 10 Backwash Queue Item + + + Filter 9 Backwash Queue Item + + + Filter 8 Backwash Queue Item + + + Filter 7 Backwash Queue Item + + + + + Array that contains each filter's BW Priorities + + + Array that contains each filter's BW Time Stamps + + + + + + + + + Level of the Reclaim Basin designated as DUTY + + + DUTY Reclaim Basin Level operator level setpoint + + + + + DUTY Reclaim Basin Level is below operator entered level setpoint + + + Maximum Number of Filters allowed in Backwash + + + + + Next Filter to go into Backwash + + + Number of filters in Backwash Sequence + + + Maximum Number of Filters currently running Backwash + + + + Selected Filter Go To Top of BW Queue + + + Gets the next Backwash Filter off the BW Queue + + + Array that contains each Filter's BW Comm Fail Status + + + Array of Queue Filter Numbers to Backwash, Item 1 is the next item to go into Backwash Sequence + + + + Selected Filter in the Backwash Queue + + + Remove Selected Filter from Backwash Queue + + + + Filter Number Command to start Backwash. All Filter PLCs look at this to determine which Filter goes into Backwash + + + + + + Filter Number Command to remove Filter from the Backwash Queue. All Filter PLCs look at this to know when to go to HOLD and zero step number. + + + + + + Maximum Number of Filters allowed in Drawdown Setpoint + + + + + Next Filter to go into Drawdown + + + Maximum Number of Filters currently running Drawdown + + + + + Array of Backwash Queue Items. Item 1 is the next item to backwash + + + Selected Filter in the Drawdown Queue + + + + Selected Filter Drawdown Start Command + + + Filter Number Command to start Drawdown. All Filter PLCs look at this to determine which Filter goes into Drawdown + + + Remove Selected Filter from Drawdown Queue + + + Filter Number Command to remove filter from the Drawdown Queue. All Filter PLCs look at this to determine which filter to zero out the priority (removes from queue) + + + Selected Filter Go To Top of DD Queue + + + Filter Number Command to go to top of Drawdown Queue. All Filter PLCs look at this to determine which Filter to make priority 1 (highest priority) and put oldest timestamp + + + + + + + + + + + + + Maximum Number of Filters allowed in Filter to Waste Setpoint + + + + + Next Filter to go into Filter to Waste + + + Number of Filters in Filter to Waste Sequence + + + Maximum Number of Filters currently running Filter to Waste + + + + Selected Filter Go To Top of FTW Queue + + + + Array of Queue Filter Numbers to Filter to Waste, Item 1 is the next item to go into filter to waste sequence + + + Selected Filter in the Filter to Waste Queue + + + + + + + + + Remove Selected Filter from Filter to Waste Queue + + + + Filter Number Command to start Filter to Waste. All Filter PLCs look at this to determine which filter goes into Filter to Waste + + + Filter Number Command to remove filter from the Backwash Queue. All Filter PLCs look at this to know when to go to Out of Service and zero step number + + + All Filters Blower Requests + + + All Filter Wash Water Requests + + + All Filters Wash Water High Signals + + + All FIlters Wash Water Low 1 Signals + + + All Filters Blower Bypass Close Requests + + + All Filters Wash Water Low 2 Signals + + + All Filters Wash Water Refresh Signals + + + Total of all online filter levels + + + Total number of filters online (not in backwash) + + + Average of all online filter levels + + + Count Filter 1 in Level Filter Count + + + Filter 1 Level to be used for Filter Level Mode Average + + + Count Filter 2 in Level Filter Count + + + Filter 2 Level to be used for Filter Level Mode Average + + + Count Filter 3 in Level Filter Count + + + Filter 3 Level to be used for Filter Level Mode Average + + + Count Filter 4 in Level Filter Count + + + Filter 4 Level to be used for Filter Level Mode Average + + + Count Filter 5 in Level Filter Count + + + Filter 5 Level to be used for Filter Level Mode Average + + + Count Filter 6 in Level Filter Count + + + Filter 6 Level to be used for Filter Level Mode Average + + + Count Filter 7 in Level Filter Count + + + Filter 7 Level to be used for Filter Level Mode Average + + + Count Filter 8 in Level Filter Count + + + Filter 8 Level to be used for Filter Level Mode Average + + + Count Filter 9 in Level Filter Count + + + Filter 9 Level to be used for Filter Level Mode Average + + + Count Filter 10 in Level Filter Count + + + Filter 10 Level to be used for Filter Level Mode Average + + + Count Filter 11 in Level Filter Count + + + Filter 11 Level to be used for Filter Level Mode Average + + + Count Filter 12 in Level Filter Count + + + Filter 12 Level to be used for Filter Level Mode Average + + + + + + 1024 + + + 0 + + + 2048 + + + 0 + + + 2 + + + 0 + + + 7962 + + + 7.962 + + + 7.962 + + + 0.0 + + + 11.35 + + + 0.0 + + + 11350.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 257 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 257 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 257 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 257 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 257 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + + + 0 + + + 9.0 + + + 7.0 + + + 0.0 + + + 0.0 + + + 2.3 + + + 600 + + + 180.0 + + + 2.5 + + + 60.0 + + + 0 + + + 60 + + + 0.0 + + + 240.0 + + + 0.0 + + + 120.0 + + + 7.5 + + + 0 + + + 600 + + + 0.0 + + + 0.0 + + + 30 + + + 0.148 + + + 300.0 + + + 9.5 + + + 0.18 + + + 24.0 + + + 0.0 + + + 600.0 + + + 0.0 + + + 10.0 + + + 38.0 + + + 5.0 + + + 60 + + + 150 + + + 60 + + + 0 + + + 0 + + + 0.144 + + + 5.0 + + + 60.0 + + + 180.0 + + + 300 + + + 0.3 + + + 36.0 + + + 12.0 + + + 400.0 + + + 0.5 + + + 2.3 + + + 1200 + + + 8.25 + + + 6.75 + + + 7.0 + + + 8.0 + + + 240.0 + + + 5.0 + + + + Previous value for Filter Effluent Flow Setpoint + + + Change in Effluent Flow Master Setpoint detected + + + Level Mode Permissive + + + Master Level PID Setpoint from HMI + + + + + Master Level Control + + + 8.0 + + + 8.0 + + + + 11183 + + + 0.0 + + + 11.35 + + + 0.9 + + + 1.1 + + + TRUE + + + FALSE + + + 100.0 + + + t#0s + + + 0.02 + + + 0.0 + + + + 0 + + + 0 + + + 0.9 + + + 3 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 15.0 + + + 15.0 + + + + + + + Number of Filters Requesting or Running in Level Mode + + + Minimum Number of Filters that allow level mode + + + + + Minimum Number of Filters that allow + + + + + + Filters Level Mode Control Disabled + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + Number of Filters that are In-Service + + + + Filter 1 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 2 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 3 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 4 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 5 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 6 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 7 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 8 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 9 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 10 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 11 In Service (0 - NOT In Service / 1 - In Service) + + + Filter 12 In Service (0 - NOT In Service / 1 - In Service) + + + + Air Scour Blower 1 + + + -22400 + + + 16388 + + + 32 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 59 + + + 40 + + + 0 + + + 0 + + + 638 + + + 0 + + + 0 + + + + 2021 + + + 1 + + + 6 + + + 14 + + + 5 + + + 46 + + + + + 2021 + + + 1 + + + 6 + + + 14 + + + 6 + + + 0 + + + + + 6 + + + 13 + + + 2024 + + + 9 + + + 7 + + + 29 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 0 + + + + + Air Scour Blowers Call the DUTY to run + + + + Air Scour Blower 2 + + + -22400 + + + 16388 + + + 32 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 51 + + + 59 + + + 0 + + + 27 + + + 493 + + + 0 + + + 5 + + + + 2021 + + + 1 + + + 5 + + + 11 + + + 52 + + + 23 + + + + + 2021 + + + 1 + + + 6 + + + 14 + + + 7 + + + 53 + + + + + 7 + + + 16 + + + 2024 + + + 18 + + + 42 + + + 59 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 56 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 24578 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 10 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 0 + + + + Air Scour Blower 1 Duty/Standy Command to Run + + + Air Scour Blower 2 Duty/Standby Command to Run + + + Air Scour Blowers are Not Auto Ready + + + Air Scour Blower 1 Duty/Standby + + + 4 + + + + Air Scour Blower 2 Duty/Standby + + + 2 + + + + Blower 1 or Blower 2 is Auto Ready + + + Blower Running + + + Filter Controlling Backwash. 0 if None, -1 if Locked out. + + + Washwater Auto Ready Status + + + Washwater request from filters + + + + + Backwash Air Vent Control Valve + + + 18455 + + + 256 + + + 9 + + + 0 + + + 0 + + + 0 + + + 19966 + + + 0.0 + + + 0.0 + + + 2.0 + + + 10259.82 + + + 100.0 + + + 100.0 + + + 100.0 + + + 20000 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 5 + + + 0 + + + 250 + + + 5 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 290 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 27713 + + + 29281 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 180.0 + + + 180.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 90.0 + + + 90.0 + + + + 999999.0 + + + 99.7875 + + + -0.2125015 + + + 0 + + + + + Discharge Air Flow Rate Setpoint + + + + + Backwash Air Vent Control + + + 3000.0 + + + 2.0 + + + + 11183 + + + 0.0 + + + 5000.0 + + + 0.0 + + + 100.0 + + + TRUE + + + FALSE + + + 0.01 + + + t#3s_750ms + + + 100.0 + + + 999999.0 + + + + 0 + + + 0 + + + 100.0 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 6 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 63 + + + 0 + + + 0 + + + 750 + + + 0 + + + 45.0 + + + 45.0 + + + + + 2 + + + 0 + + + 24576 + + + 27753 + + + 25701 + + + 0 + + + 1000 + + + 0 + + + 15.0 + + + 15.0 + + + + + + Filter Backwash Supply Control Valve + + + 18455 + + + 0 + + + 137 + + + 2 + + + 0 + + + 0 + + + 4292 + + + 0.0 + + + 0.0 + + + 2.0 + + + 0.0 + + + 1.517946 + + + 1.517946 + + + 1.517946 + + + 4243 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 1 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 1026 + + + 28256 + + + 8218 + + + 18761 + + + 22304 + + + 0 + + + 1000 + + + 29793 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 20512 + + + 30.0 + + + 30.0 + + + + 999999.0 + + + 1.825 + + + 0.3070538 + + + 0 + + + + WW LOW FLOW REQUEST + + + WW HIGH FLOW REQUEST + + + WW 2nd LOW FLOW REQUEST + + + WW REFRESH FLOW REQUEST + + + Filter Backwash Supply Control Valve Position Ramp SP + + + + + Filter Backwash Supply Control Valve position setpoint for Idle + + + + + + Filter Backwash Supply Control Valve Ramp Parameters + + + 0.1866667 + + + 0.55 + + + + + Total of filters 1-6 effluent flows + + + Total of filters 7-12 effluent flows + + + Total of all filter effluent flows + + + + Manual Backwash Supply Flow Rate + + + + + Filter Backwash Supply Control + + + 0.0 + + + 2.0 + + + + 11183 + + + 0.0 + + + 49.0 + + + 1.0 + + + 100.0 + + + FALSE + + + FALSE + + + 0.3 + + + t#8s_250ms + + + 0.1 + + + 0.0 + + + + 0 + + + 0 + + + 1.517946 + + + 3 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 27713 + + + 29281 + + + 0 + + + 750 + + + 0 + + + 300.0 + + + 300.0 + + + + + 2 + + + 0 + + + 0 + + + 27713 + + + 29281 + + + 0 + + + 1000 + + + 0 + + + 15.0 + + + 15.0 + + + + + + + + + + Reclaim Read Pulse + + + + Reclaim Read Data Buffer + + + Reclaim Read Error + + + Reclaim Read Control Word + + + Read + 16#0002 + + + Error + 16#0000 + + + Length (7 registers) + 16#0007 + + + Start Register (%MW400100) + 16#005B + + + Card and Address (2 / 0) + 16#0200 + + + IP1 (192) + 16#00C0 + + + IP2 (168) + 16#00A8 + + + IP3 (116) + 16#0074 + + + IP4 (53) + 16#0035 + + + + Reclaim Read Active + + + Reclaim Read Success + + + Last WDOG value received from the Ozone/Reclaim PLC + + + Reclaim Polling Abort + + + Ozone/Reclaim PLC Communication Failure Alarm + + + 13 + + + 16 + + + 1 + + + 0 + + + 0 + + + 0 + + + + 11 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 29.38 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + Duty Reclaim Basin Level High sent to Filters + + + Which Reclaim Basin is set as DUTY (1 - Basin 1 / 2 - Basin 2) + + + + + Wash Water Tank Low Alarm Level + + + + + + + + + Booster Pump Station Read Pulse + + + + Booster Pump Station Read Data Buffer + + + Booster Pump Station Read Error + + + Booster Pump Station Read Control Word + + + Read + 16#0002 + + + Error + 16#0000 + + + Length (7 registers) + 16#0007 + + + Start Register (%MW400100) + 16#006F + + + Card and Address (2 / 0) + 16#0200 + + + IP1 (192) + 16#00C0 + + + IP2 (168) + 16#00A8 + + + IP4 (49) + 16#0031 + + + IP3 (116) + 16#0074 + + + + Booster Pump Station Read Active + + + Booster Pump Station Read Success + + + Last WDOG value received from the Booster PS PLC + + + Booster PS PLC Communication Failure Alarm + + + 13 + + + 16 + + + 30036 + + + 29541 + + + 24932 + + + 11385 + + + + 11 + + + 29296 + + + 26666 + + + 12320 + + + 11314 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 14.38 + + + + + 2 + + + 72 + + + 10 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + + + + + + Filter Building Desiccant Air Dryer Alarm + + + -30198 + + + 25616 + + + 109 + + + 0 + + + 0 + + + 0 + + + + 91 + + + 0 + + + 4170 + + + 0 + + + 0 + + + 8464 + + + 250 + + + 0 + + + 5.0 + + + 0.0 + + + + + 2 + + + 0 + + + 10 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 8464 + + + + + + + + + DUTY Reclaim Basin Level operator level setpoint + + + + + DUTY Reclaim Basin Level is below operator entered level setpoint + + + + + + + + + + + + + + + + Backwash Supply Flow Control Valve Setpoint to PID + + + + + + + + + + + + + + + Wash Water Tank Backwash Inhibit Low Level Setpoint + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SPARE + + + SCADA Drop 1 / Rack 0 / Slot 4 Module Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + SPARE Channel Fault + + + + SCADA Drop 1 / Rack 0 / Slot 4 Module Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 27496 + + + 26624 + + + 19488 + + + 28527 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 1 + + + 0 + + + 5 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 16#0002 + + + 16#0000 + + + 16#0004 + + + 16#0071 + + + 16#0200 + + + 16#00C0 + + + 16#00A8 + + + 16#0074 + + + 16#001A + + + + + + + + Filter BW Supply Post-CTS Chlorine Residual + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 14301 + + + 3.219063 + + + 3.219063 + + + 0.0 + + + 5.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + Test - delete afterwards + + + + + Air Scour Blower 1 Cooling System Panel Failure + + + Air Scour Blower 2 Cooling System Panel Failure + + + Air Scour Blower 2 Cooling System Panel Failure + + + 5 + + + 0 + + + 510 + + + 0 + + + 5 + + + 0 + + + + 17239 + + + 13107 + + + 12848 + + + 18015 + + + 24406 + + + 12854 + + + 750 + + + 0 + + + 5.0 + + + 0.0 + + + + + 512 + + + 0 + + + 0 + + + 27728 + + + 28257 + + + 8308 + + + 250 + + + 22304 + + + 5.0 + + + 4.544817E+030 + + + + 4.745043E+027 + + + 0 + + + + Air Scour Blower 2 Cooling System Panel Failure + + + 4175 + + + 0 + + + 0 + + + 27713 + + + 29281 + + + 109 + + + + 512 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 0.0 + + + + + 512 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 27753 + + + 5.0 + + + 1.896904E+031 + + + + 1.415311E-043 + + + 0 + + + + + PLC Clock Control with Midnight Flag.(Version 1.0 - M580) + + + + + PLC Time and Date updated to User or SCADA Server values when set "true" + + + + Entered Month Value (1-12) + + + + Entered Day of Month Value (1-31) + + + + Entered Year Value (2017-2099 or 00-99) + + + + Entered Hour Value (0-12) + + + + Entered Minute Value (0-59) + + + + Entered Seconds Value (1-59) + + + + + + Current Day of Week from PLC Calendar + + + + Current Month from PLC Calendar + + + + Current Day from PLC Calendar + + + + Current Year from PLC Calendar + + + + Current Hour from PLC Clock + + + + Current Minuite from PLC Clock + + + + Current Second from PLC Clock + + + + New Day - Set to true for 1 Second at PLC Clock Midnight. + + + + + + PLC Real Time Clock Value + + Seconds (16#ss,-) + + + Hour, Minute (16#hhmm) + + + Month, Day (16#mmdd) + + + year (16#yyyy) + + + + Internal Time being Written to PLC Real Time Clock + + + + + This section writes to the PLC clock + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + SYSTEM TIME - SET PLC REAL TIME CLOCK +Update the PLC Real time Clock with conditioned values + + + If entered value is greater than 2010, subtract 2000, else limit from 0-99 & add 2000. + + + After Block inputs are limted to appropriate range, the datatypes are converted and put into an array used by the PLC Real time Clock, when the update bit is set true, the clock is updated with the array values. + + + Move array into Day Time format and update the clock + + + Minutes and Hours into the second integer of the Set DateTime Array - set_plc_rtc + + + Year into fourth integer of the Set DateTime Array - set_plc_rtc + + + Day and Month into Third integer of the Set DateTime Array - set_plc_rtc + + + + + + + This section reads the PLC clock + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Derive year from the final integer of the DateTime Array - plc_rtc + + + Derive Seconds from the first integer of the DateTime Array - plc_rtc + + + Derive Minutes and Hours from the second integer of the DateTime Array - plc_rtc + + + Extract the PLC Real TIme Clock into DATE TIME Format, then extract the DATE TIME into an array. + + + Derive Day and Month from the third integer of the DateTime Array - plc_rtc + + + SYSTEM TIME - GET PLC REAL TIME CLOCK CURRENT VALUES +- Derive Day of Week, Second, Minuite, Hour, Day, Month, and Year from PLC System Real Time Clock DT Format. + + + Use a Multiplexer to select proper BCD Type values for Day of Week + + + + + + + This section determines when a new day has occured + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + SYSTEM TIME - CALCULATE MIDNIGHT +- At midnight generate a New Day flag for Totalizer Reset + + + If PLC Clock Hour =0, Minuite=0, and Second=0, flag new day. + + + + + + + + Digital input fault routing - ladder based + + + + + Input tag to monitor for alarm + + + + Input value signifying alarm + + + + Device IO Fault + + + + + + Global Reset from Logic + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + DDT for use with dfb_Alarm + + + + + + 1 = In Alarm + + + + Annunciate Alarm + + + + Alarm has been Acknowledged + + + + Alarm is latched but can be reset because condition is cleared. + + + + Fault Is In Alarm (on longer than the delay) + + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + + dfb_Alarm for handling alarms + + + Alarm is in fault + + + PLC IO Fault Alarm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + dfb_DI_L +Ladder based discrete alarm handling with messages. + +Deterimine if input is in fault. + + + 0= enable alarm + + + if any one of the Alarms are on, set the general GenAlarm bit + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + Input value signifying alarm + + + if any one of the aknowledged bits are on, set the GenAlarmAcked bit + + + Map items from DDT + + + if any one of the Annunciate bits are on, set the general GenAnnunciate bit. + + + Map items to DDT + + + Input tag to monitor for alarm + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + DI ALARM + If the input is on, activate the alarm if it is enabled + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Set all Alarm DFB's Shelve Duration Time. The HMI is using "DI_L.Alarm" for the initial Shelve Duration. + + + Discrete input condition indicating a faulted state + + + Move Alarm Notify # to 0 if no Alarms are active. + + + + + + + + DDT for DI Ladder DFB: Digital input fault routing - ladder based, No Strings + + + + First integer of packed bits + + + Input tag to monitor for alarm + + + + Input is in fault + + + + Input value signifying alarm + + + + Fault Is In Alarm (on longer than the delay) + + + + 0 = enable alarm + + + + Reset Alarm + + + + Acknowledge Alarm + + + + Maintenance Command to Enable Alarm + + + + Maintenance Command to Disable Alarm + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annunciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + Shelve Command from HMI + + + + Suppress Command from HMI + + + + + + + Second integer of packed bits + + + Reset all Alarms On this PLC + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Alarm is in fault + + + + Shelved Status + + + + Suppressed Status + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Tagged Out of Service + + + + Spare Third integer of packed bits. + + + Spare Fourth integer of packed bits. + + + Spare Integer + + + Spare Integer + + + ddt_Alarm for handling alarms + + + PLC Fault Alarm DDT + + + Alarm Time Remaining + + + Combined Alarm Value Notification for HMI + + + + + DDT for Alarm DFB, No Strings + + + + First Integer of packed Bits + + + Discrete input condition indicating a faulted state. + + + + Value of the Fault input that indicates an alarm condition + + + + Used to reset all alarms in the PLC + + + + Fault Is In Alarm (on longer than the delay) + + + + Alarm: Output indicating a fault has progressed to alarm state. + + + + Annunciate, indicator to flash alarm on HMI. Set once a fault has reached alarm status. Setting Ack will reset Annuciate and will only set again once the fault transitions from False to True again. + + + + Acknowledged: Alarm has been acknowledged, will stop the individual alarms from blinking on the popups + + + + Alarm is latched but can be reset becasue condition is cleared. + + + + Reset this alarm only + + + + Acknowledge Command + + + + Remove the Acknowledge Status + + + + Maintenance Command to Enable Alarm + + + + Maintenance Command to Disable Alarm + + + + Operator Command to Shelve Alarm + + + + Operator Command to UnShelve Alarm + + + + Supervisor Command to Suppress Alarm + + + + Second Integer of packed Bits + + + Supervisor Command to Unsuppress Alarm + + + + Alarm and Events Shelve Timer Done + + + + Discrete Input condition indicating a Bad Signal condition + + + + Alarm and Events Bools + + + Suppress Alarm Command to AE Server + + + + UnSuppress Alarm Command to AE Server + + + + Shelve Alarm Command to AE Server + + + + Unshelve Alarm Command to AE Server + + + + Enable Alarm Command to AE Server + + + + Disable Alarm Command to AE Server + + + + Acknowlege Command to AE Server + + + + Reset Command to AE Server + + + + Alarm Suppressed Status from AE Server + + + + Alarm Shelved Status from AE Server + + + + Alarm Disabled Status from AE Server + + + + Alarm Acknowledged Status from AE Server + + + + Alarm Command to AE Server + + + + Spare Int + + + Spare Int + + + Alarm Value Notification for Alarm and Event Server + + + Alarm and Events Severity (0-1000) + + + Alarm and Events Suppress Duration Setpoint + + + Alarm Delay: Seconds before a fault will progress to alarm state. + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + This DFB supports alarming on a discrete value (Fault). The alarm can be tripped by Fault being 0 or 1 (as defined by the AlarmState input). + + + + + Discrete input condition indicating a faulted state. + + + + + Value of the Fault input that indicates an alarm condition + + + + + Discrete input condition indicating a Bad Signal condition + + + + + + + Global Reset from Logic + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Alarm DDT + + + + + + Alarm: Output indicating a fault has progressed to alarm state. + + + + + Annunciate, indicator to flash alarm on HMI. Set once a fault has reached alarm status. Setting Ack will reset Annuciate and will only set again once the fault transitions from False to True again. + + + + + Acknowledged: Alarm has been acknowledged, will stop the individual alarms from blinking on the popups + + + + + Alarm is latched but can bee reset becasue condition is cleared. + + + + + Fault Is In Alarm (on longer than the delay) + + + + 1=Alarm has been suppressed, shelved or disabled, display "S" icon + + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + + + Alarm Suppressed Status + + + Alarm Disabled Status + + + Alarm Shelved Status + + + + + True for one scan following the alarm tripping. + + + + + + + + + + + + Working Internal Alarm Suppressed Status + + + Number of Minutes until this alarm unshelves itself + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Used to reset all alarms in the PLC + + + + + + + + Reset: HMI input used to reset an alarm once the fault has been cleared. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Discret input indicating a faulted state + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + + + + Discret input indicating a faulted state + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + Value of the fault input indicates an alarm condition + + + + + Fault is in Alarm - on longer than the delay + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + Latch Alarm when the alarm trips. Hold it latched until reset while fault timer is not done. + + + Send Alarm Status to AE Server + + + This rung receives the Operator Shelve Command. +If the command is received while shelved, the shelf timer starts over (reset). + + + Send Alarm Acknowldege to AE Server + + + Send Alarm Acknowldege to AE Server + + + This rung receives the Maintenance Alarm Disable Command + + + Send Alarm Acknowldege to AE Server + + + This rung calculates the number of seconds until this alarm "unshelves" itself. +If the alarm is already unshelved, clear this number. + + + This rung times how long the alarm has been shelved. +If the Shelf Timer expires (and its preset > 0), automatically unshelve the alarm. +If the command is received while shelved, the shelf timer starts over (reset). + + + Suppress is cleared if the program command for suppress is cleared + + + Clear HMI Commands after a short periof of time. The timers were used to allow multiple alarms to be used in a single DFB such as the Ain DFB, and not have the first ACK and RESET turn off before the others see it. + + + ============================================================ +COMMAND PROCESSING +============================================================ +These rungs handle received Commands: +Operator Commands (Operxx) and Maintenance Commands +(MCmd_xx) from the HMI and +Program Command (PCmd_xx) from other objects. + +NOTE: ALARM COMMANDS ARE ACCEPTED REGARDLESS OF MODE. + +This rung receives the Program Alarm Inhibit Command. + + + Latch Acked if acknowledged or reset by the HMI while the alarm is active. Break the latch if the alarm trips again (if may have cleared while latched and tripped again). Break the latch if another alarm outside this DFB + + + Send Alarm Acknowldege to AE Server + + + These synchronize the Alarm and Event Statuses with the alarm + + + Set delay time (miliSeconds) based on alarm delay in seconds. Then convert to type TIME. + + + Latch the unacknowledged status if the alarm goes away without being acknowledged or reset or re-occuring. + + + Map items to DDT + + + This rung receives the Operator Unshelve Command (Unshelve wins over Shelve) +and the Program Unshelve Command +Also Unshelve the alarm if the Shelf Timer expires (if preset > 0). + +NOTE: Shelved can also be set/cleared directly by the HMI (FTA&E support). + + + Start delay timer when fault is the same as the alarm state. + + + Alarm Severity: 1=Alert, 2..250=Low, 251..500=Medium, 501..750=High, 751..1000=Urgent + + + Map items from DDT + + + This rung receives the program command for suppress + + + Notify Level (color, blink) is determined here. + +0 = No Alarm +8 = Alert severity, resettable, unacknowledged +9 = Alert severity, resettable +10 = Alert severity, acknowledged +11 = Alert severity, unacknowledged +12 = Alert severity, Bad, resettable, unacknowledged +13 = Alert severity, Bad, resettable +14 = Alert severity, Bad, acknowledged +15 = Alert severity, Bad, unacknowledged +16 = Low severity alarm, resettable, unacknowledged +17 = Low severity alarm, resettable +18 = Low severity alarm, acknowledged +19 = Low severity alarm, unacknowledged +20 = Low severity, Bad, resettable, unacknowledged +21 = Low severity, Bad, resettable +22 = Low severity, Bad, acknowledged +23 = Low severity, Bad, unacknowledged +32 = Medium severity alarm, resettable, unacknowledged +33 = Medium severity alarm, resettable +34 = Medium severity alarm, acknowledged +35 = Medium severity alarm, unacknowledged +36 = Medium severity, Bad, resettable, unacknowledged +37 = Medium severity, Bad, resettable +38 = Medium severity, Bad, acknowledged +39 = Medium severity, Bad, unacknowledged +48 = High severity alarm, resettable, unacknowledged +49 = High severity alarm, resettable +50 = High severity alarm, acknowledged +51 = High severity alarm, unacknowledged +52 = High severity, Bad, resettable, unacknowledged +53 = High severity, Bad, resettable +54 = High severity, Bad, acknowledged +55 = High severity, Bad, unacknowledged +64 = Urgent severity alarm, resettable, unacknowledged +65 = Urgent severity alarm, resettable +66 = Urgent severity alarm, acknowledged +67 = Urgent severity alarm, unacknowledged +68 = Urgent severity, Bad, resettable, unacknowledged +69 = Urgent severity, Bad, resettable +70 = Urgent severity, Bad, acknowledged +71 = Urgent severity, Bad, unacknowledged + + + This rung receives the Maintenance Alarm Enable Command (Enable wins over Disable) +NOTE: Disabled can also be set/cleared directly by the HMI (FTA&E support). + + + ============================================================ +VALUE / STATUS GENERATION +============================================================ +This rung copies the internal working status (Suppressed, In Alarm) +to public Status bits. Note that internal working bits are used so that +outside objects cannot manipulate the state of this object +by setting/clearing its Status and Alarm bits. + +Public Status is generated for: +Alarm (with minimum ON time to be seen by polling) +Alarm Suppressed +Unsuppressed, Unshelved and Enabled are generated for HMI. + +(Ack, Shelved and Disabled can be set/cleared by the HMI directly. +Note that these bits are "read/write" outputs in the parameter definition.) + + + Latch the annunciate bit when the alarm ccurs. Unlatch when either Acked or the fault clears. + + + + + + + + Analog Inputs + + + + + Raw from Input Card + + + + Reset all Alarms On this DFB + + + + Used for Scaling to EU + + + + Used for Scaling to EU + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + Suppress Level Alarms (LL, L, H, HH, & ROC) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + System Time + + + + Analog Input DDT + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annuciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + Scaled Value in Engineering Units + + + + Locked by Program + + + + + + + + + + + + Device has a Broken Loop Alarm + + + Device Signal is Under Range Alarm + + + Device Signal is Low Low Alarm + + + Device Signal is Low Alarm + + + Device Signal is High Alarm + + + Device Signal is High High Alarm + + + Device Signal is Over Range Alarm + + + Device Rate of Change Alarm + + + + Totalizing DFB + + + PLC IO Fault + + + + + + totalized value since totalizer was last reset. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Ain.Raw: Raw Value from input card + + + Ain.Raw: Raw Value from input card + + + PCUnSuppress: + + + PCSuppress: + + + PLCFault: + + + Ain.RawMin: Used for Scaling to EU + + + Ain.ORSP: Over Range Raw Alarm Limit + + + Ain.H_SP: High Alarm Limit + + + This is to ensure that the reset setpoint doesn't get set above the interlock setpoint. + + + Test for a High High fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.LL_SP: Low Low Alarm Limit + + + Set all Alarm DFB's Shelve Duration Time. The HMI is using "almHighHigh" for the initial Shelve Duration. + + + Test for a High fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + RawMax: Used for Scaling to EU + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + Scale the raw input into engineering units. + +((VMAX - VMIN) * (Raw - RawMin)/(RawMax - RawMin)) + VMIN + + + Ain.RawMin: Raw Value used for scaling to EU + + + Ain.GlobalReset: Reset all Alarms in this DFB + + + If above the Interlock Setpoint you are now interlocked. The Interlock will automatically clear when the VALU is below the Interlock reset setpoint. + + + Ain.Raw: Raw from Input Card + + + Map items to DDT + + + Ain.RCSP: Max Absolute Chnage in EU per second to trip the Rate of Change Fault + + + Ain.Raw: Raw Value from input card + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + SuppressLA: Suppress Level Alarms (LL, L, H, HH, ROC) + + + Ain.PCSuppress: + + + Test for a Low Low fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Low Alarm. + + + Test for a Broken loop fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.PCUnSuppress: + + + Ain.Raw: Raw Value from input card + + + RawMin: Used for Scaling to EU + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + GlobalReset: Reset all Alarms in this DFB + + + if any one of the acknowledged bits are on, set the GenAlarmAcked bit + + + totalized value since totalizer was last reset. + + + Map items from DDT + + + Set true to totalize flow. + + + Ain.RawMin: Raw Value used for scaling to EU + + + Over Range Alarm. + + + Rate of Change Alarm. + + + High Alarm. + + + Ain.INTK_SP: Interlock Setpoint + + + Test for a Under Range fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Clear all HMI Commands + + + High High Alarm. + + + Ain.Raw: Raw Value from input card + + + Move Alarm Notify # to 0 if no Alarms are active. + + + if any one of the Alarms are on, set the general GenAlarm bit + + + Raw: Raw from Input Card + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + Low Low Alarm. + + + Ain.VMIN: Scaled Value with Raw at RawMin + + + Ain.LL_SP: Low Low Alarm Limit + + + Ain.Raw: Raw Value from input card + + + On First Scan reset all Alarms + + + Ain.VALU: Scaled Value in Engineering Units + + + Test for a Rate of Change fault. +Trip the imidiate fault if enabled and absolute value of the change (* 5 to get change per second based on 200 ms period) is greater than the set point. +Write current EU to old value for next scan. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + +ABS(Old_Val-VALU)*5 > RCSP + + + PCUnShelve: + + + Ain.Raw: Raw Value from input card + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + Ain.Raw: Raw Value from input card + + + Call the Alarm AOI for the IO PLC Fault + + + Test for a Low fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.PCUnShelve: + + + Ain.INTK_SP: Interlock Setpoint + + + Under Range Alarm. + + + Ain.BLSP: Raw Low Limit for Broken Loop + + + Broken Loop Alarm. + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + if any one of the Annunciate bits are on, set the general GenAnnuciate bit + + + Ain.INTK_SP: Interlock Setpoint + + + Interlock: If the Interlock is Enabled, check to see if the VALU(Engineering Unit) is Greater than the Interlock Setpoint. + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + Reset all Alarms in this AOI + + + Ain.PLCFault: + + + Ain.RawMax: Used for Scaling to EU + + + To avoid division by zero, the RawMin and RawMax must be different. + + + Ain.SuppressLA: Suppress Level Alarms (LL, L, H, HH, ROC) + + + Ain.RawMax: Raw Value used for scaling to EU + + + Ain.HH_SP: High High Alarm Limit + + + Ain.URSP: Under Range Raw Alarm Limit + + + Test for a Over Range fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + + + + + + DDT for Analog DFB: Analog Inputs, No Strings + + + + First Integer of packed Bits + + + Reset all Alarms On this PLC + + + + Enable High High Alarm + + + + Enable High Alarm + + + + Enable Low Alarm + + + + Enable Low Low Alarm + + + + Enable Broken Loop Alarm + + + + Enable Over Range Alarm + + + + Enable Under Range Alarm + + + + Enable Rate of Change Alarm + + + + Suppress All Alarms + + + + Suppress Level Alarms (LL, L, H, HH, & ROC) + + + + RawMin = RawMax: Causes division by zero + + + + High High Alarm + + + + High Alarm + + + + Low Alarm + + + + Low Low Alarm + + + + Second Integer of packed Bits + + + Broken Loop Alarm + + + + Over Range Alarm + + + + Under Range Alarm + + + + Rate of Change Alarm + + + + Reset all Alarms in this DFB + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annunciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + High High Fault + + + + High Fault + + + + Low Fault + + + + Low Low Fault + + + + Broken Loop Fault + + + + Over Range Fault + + + + Under Range Fault + + + + Third Integer of packed Bits + + + Rate of Change Fault + + + + Set true to totalize flow. + + + + Tagged Out of Service + + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + + Locked by program (ESD) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Enable Interlock Alarm + + + + Shelve Command from HMI + + + + Shelved Status + + + + Suppress Command from HMI + + + + Suppressed Status + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed Bits (SPARE) + + + Spare Integer + + + Spare Integer + + + Raw from Input Card + + + Scaled Value in Engineering Units + + + Prevoius Value for Rate of Change Checking + + + Scaled Value with Raw at RawMin + + + Scaled Value with Raw at RawMax + + + Used for Scaling to EU + + + Used for Scaling to EU + + + High High Alarm Limit + + + High Alarm Limit + + + Low Alarm Limit + + + Low Low Alarm Limit + + + Raw Low Limit for Broken Loop + + + Over Range Raw Alarm Limit + + + Under Range Raw Alarm Limit + + + Max Absolute Change In EU per Second to trip the Rate Of Change Fault + + + Interlock Alarm Limit + + + totalized value since totalizer was last reset. + + + High High Alarm DDT + + First Integer of packed Bits + + + Second Integer of packed Bits + + + + High Alarm DDT + + + Low Alarm DDT + + + Low Low Alarm DDT + + + Broken Loop Alarm DDT + + + Over Range Alarm DDT + + + Under Range Alarm DDT + + + Rate Of Change Alarm DDT + + + PLC IO Fault Alarm DDT + + + Totalizer DDT + + + Interlock Reset Setpoint + + + Combined Alarm Value Notification for HMI + + + + + DDT for Tot Ladder DFB: Totalizes analog value, provides increased precision compared to built in totalizer, No Strings + + + + First Integer of Packed Bits. + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + Start Totalizing becasue flow is above the minimum + + + + HMI Command to Reset Flow Totals + + + + + + + Second Integer of Packed Bits. (SPARE) + + + Third Integer of Packed Bits. (SPARE) + + + Fourth Integer of Packed Bits. (SPARE) + + + Spare Integer + + + Spare Integer + + + Time base of flow: 0 = per Second, 1 = per Minute, 2 = per Hour, 3 = per Day + + + Scaled Analog Value + + + Max Scaled Analog Value + + + Low Flow Cut Off Percent of Max Flow That Stops Totaling + + + Today's Total Flow + + + Yesterday's Total Flow + + + Total FLow Since Last Reset + + + Counts 500 days + + + Keep total for past 500 days + + + + In flow units + + + Time the total was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + How often per unit of time is analog value sampled + + + Total Flow for the Current Minute + + + Total Flow for One 5th of One Second + + + Total Flow of all Completed Minutes Today + + + Totalized Value + + + + + + Totalizes analog value, provides increased precision compared to built in totalizer + + + + + Scaled Analog Value + + + + Max Scaled Analog Value + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + + + System Time + + + + Counts 500 days + + + + Totalizer DDT + + + + + + Today's Total Flow + + + + Yesterday's Total Flow + + + + Total FLow Since Last Reset + + + + + + + Counts 500 Days + + + Counts 500 Days Reset + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Yesterday's Total Flow + + + Map items to DDT + + + Time base of flow +0 = per Second +1 = per Minute +2 = per Hour +3 = per Day + + + Calculate the 500 day total (the total of the competed days plus plus the current day) + + + Total Flow of all Completed Minutes Today + + + Low flow Cutoff in Units + + + Totalized Value + + + Keep total for past 500 days + + + Hour + + + Today's Total Flow + + + Total Flow for one 5th of One Second + + + Total Flow Since Last Reset + + + Determine what value to divide summation by to get correct units based on the time base of the flow units. + + + After two minutes (600 scans, each 200ms) or if it is a day roll over: +Add the two minutes total to the todays total. +Clear the two minute total and reset the scan count. + + + Move 0 into 500 Day Total Count + + + Start Totalizing because flow is above the minimum + + + 500 Count Days reset + + + Hour + + + Move 0 into Two Minute Count + + + Minute + + + Move 0 into Total Flow of all Completed Minutes Today + + + Oneshot resets values on day change + + + Convert current flow rate to total flow for the last 200 ms. + + + Determine if a Day Roll Over will take place this scan + + + Calculate the overall total (the total of the 500 day total plus the current Total) + + + Total the flow for two minutes. Don't total for too long or the rounding error becomes significant. Dont total while flow is too low. + + + Two Minute Count + + + On First Scan reset all Alarms + + + Total Flow for the Current Minute + + + Start Totalizing because flow is above the minimum + + + Day + + + Minute + + + Calculate the current days total (the total for today of all completed minutes plus the current minute) + + + Move 0 into Total Flow for the Current Minute + + + Total Flow for the Current Minute + + + Year + + + Month + + + HMI Command to Reset Flow Totals + + + Totalized Value + + + On reset command from the HMI, Reset the base totals that calcualte all the other totals. + + + How often per unit of time is analog value sampled + + + Low Flow Cutoff Percent of Max Flow That Stops Totalling + + + HMI Command to Reset Flow Totals + + + Yesterday's Total Flow + + + Keep total for past 500 days + + + Total Flow of all Completed Minutes Today + + + 500 Day Count + + + If rolling the day: +Move todays total to yesterdays. +Add todays total to the TotalTotal. +Clear todays total. +Count the number of daily rolls. + + + Map items from DDT + + + + + + + + DDT for sending Basin (and filter) Data to Master PLC + + + + Packed Bits for Backwashing + + + Send Washwater in High Flow Wash status to Master PLC + + + + Send Washwater in 1st Low Flow Wash status to Master PLC + + + + Filter Requesting Blower + + + + Filter Requesting Blower Bypass Valve to Close + + + + Filter Requesting Washwater + + + + Send Washwater in 2nd Low Flow Wash status to Master PLC + + + + Send Washwater in Refresh Flow Wash status to Master PLC + + + + Interlock - At least one Washwater valve open + + + + Interlock - At least one Air Scour valve open + + + + Spare Integer + + + Washwater Control Valve Position Setpoint % Open + + + Spare Integer + + + WatchDog (use seconds from clock) + + + + + + Individual Filter Data + + Filter 1 Data + + + Filter 2 Data + + + Filter 3 Data + + + Filter 4 Data + + + Filter 5 Data + + + + + + DDT for sending Individual Filter Data (used in ddt_Comms_BToM) to Master PLC + + + + Packed Bits for Backwashing + + + Filter needs to be removed from the Backwash Queue + + + + Filter needs to be removed from the Filter to Waste Queue + + + + Drawdown Permissive + + + + Backwash Permissive + + + + Filter to Waste Permissive + + + + Level Mode Request + + + + Level Mode Status + + + + Filter Number needing backwash + + + Prioity of reason for backwash request 1) Operator Initiated, 2) High Turbidity, 3) Maint. Refresh 4) Headloss, 5) Runtime + + + Timestamp when BW was placed on the queue + + + Backwash sequence step number + + + Filter State (Offline, Online, Avialable....Etc) + + + Filter Level used for average + + + Filter Effluent Flow for wash water pump lead lag operation + + + spare integer + + + spare integer + + + spare integer + + + spare integer + + + spare integer + + + spare integer + + + spare integer + + + + + DDT for use on the backwash queue system + + + + + Filter Number needing backwash + + + Prioity of reason for backwash request 1) Operator Initiated, 2) High Turbidity, 3) Maint. Refresh 4) Headloss, 5) Runtime + + + Permissive Status of filter 0 = No Permissve, 1 = Permissive + + + Communications Failure with the Basin PLC + + + Timestamp when BW was placed on the queue + + + Timestamp converted to string for HMI + + + + + + + + Hot Standby Status Data + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Counts Filters in certain steps using the ddt_BasinToMaster structure + + + + + Basin to Master Structure from all Basin PLCs + + + + Low Step Number to use in counting a range of steps + + + + High Step Number to use in counting a range of steps + + + + Maximum Number Running Allowed + + + + Next Filter to Run + + + + + + Number of Filters in step number range + + + + Maximum Number of Filters are in the step range + + + + + + + Next Backwash Filter has Permissive + + + + Next Filter to Waste Filter has Permissive + + + + + + + + + + Index to iterate through filters of a basin + + + Index to itereate through basins + + + + (* Interate through the basin data structure and count up how many filters are with the Min and Max Step Numbers *) +Count := 0; +for Basin := 1 to 2 Do + for Filter := 1 to 6 Do + if GE (HighStepNumber,BasinToMaster[Basin].BWFilterData[Filter].StepNo, LowStepNumber) then + Count := Count + 1; + end_if; + end_for; +end_for; + + +(* Determine if the number of counts for these step numbers exceeds the maximimum setpoint *) +Max_Running := GE (Count, MaxSP); + +(* See if the next filter to run has its permissive *) +Case NextFilter of (* which basin is the filter in? *) + 1..6: Basin := 1; + 7..12: Basin := 2; +end_case; + +Filter := NextFilter - ((Basin-1) * 6); (* Calculate the filter number out of all 40 filters *) + +if NextFilter = 0 then + DD_Perm := 0; + BW_Perm := 0; + FTW_Perm := 0; +else + if (BasinToMaster[Basin].BWFilterData[Filter].DD_Perm) then (* Drawdown Permissive is made *) + DD_Perm := 1; + else + DD_Perm := 0; + end_if; + + if (BasinToMaster[Basin].BWFilterData[Filter].BW_Perm) and BWPermissive then (* Backwash Permissive is made *) + BW_Perm := 1; + else + BW_Perm := 0; + end_if; + + if (BasinToMaster[Basin].BWFilterData[Filter].FTW_Perm) and FTWPermissive then (* Filter to Waste Permissive is made *) + FTW_Perm := 1; + else + FTW_Perm := 0; + end_if; +end_if; + + + + + FIFO of FIFO Items with filter number only + + + + + Put FIFO Item on top of queue + + + + Get the top FIFO item and move up + + + + Waiting Step Number to go into the next queue + + + + Number of this queue. Used in queue status sent to basins + + + + Input for first scan bit + + + + + + + + + Array of FIFO items + + + + Basin to Master Structure from all Basin PLCs + + + + Structure of comm data to send to basins + + + + + + FIFO Top of FIFO, Next Item to run + + + + Selected Filter for remove or go to top + + + + + + Pointer to the next input item + + + Number of selected FIFO items (should be 0 or 1) + + + Put FIFO item on bottom of queue + + + Remove filter with number RemoveFilterNumber from this queue + + + + Remove all filters in the FIFO from this Filter PLC + + + + + Index to iterate through the FIFO when inserting an item or moving the FIFO up + + + Index to reverse iterate through the remaining items to be moved down when inserting FIFO items + + + Temporary FIFO item to hold the FIFO item that is being moved to the top of the FIFO + + + Index to iterate through the Comm structure to search for a basin and filter in step 3 + + + + Filter to remove from this queue + + + + Index to iterate though this FIFO + + + + + + (* Initialize tags on first scan *) +if First_Scan then + Pointer := 1; (* FIFO pointer needs to be pointing at the first element on first scan *) + for Filter := 1 to 12 Do (* Iterate through the FIFO and zero our all elements *) + Queue[Filter].FilterNumber := 0; + Queue[Filter].Selected := 0; + end_for; +end_if; + + + + (* Interate through the basin data structure and look for new filters in wait step numbers + also, while iterating though the basin data structure look for filters that want to be + removed from this queue *) +for Basin := 1 to 2 Do (* Iterate through all the basin PLCs *) + for Filter := 1 to 6 Do (* Iterate though each filter of each basin *) + StepNumberChanged := NE(BasinToMaster[Basin].BWFilterData[Filter].StepNo, StepNo_Last[((Basin-1) * 6) + Filter]); (* Index is formula for traversing data structure *) + if (BasinToMaster[Basin].BWFilterData[Filter].StepNo = WaitStepNumber) and StepNumberChanged then (* If filter BW sequence waiting for next queue step *) + if (BasinToMaster[Basin].BWFilterData[Filter].FilterNumber > 0) then (* Don't add filter if it's filter number is zero *) + Queue[Pointer].FilterNumber := BasinToMaster[Basin].BWFilterData[Filter].FilterNumber; + Queue[Pointer].Selected := 0; (* New item is not selected *) + if Pointer < 12 then (* When adding a new item to the FIFO increment the pointer down *) + Pointer := Pointer + 1; + end_if; + end_if; + end_if; + StepNo_Last[((Basin-1) * 6) + Filter] := BasinToMaster[Basin].BWFilterData[Filter].StepNo; + if ((BasinToMaster[Basin].BWFilterData[Filter].RemoveBW) and QueueNumber = 2) then (* if this FIFO is the BW and there is a filter to remove *) + RemoveFilterNumber := ((Basin-1) * 6) + Filter; (* if this filter number is to be removed, remember it for remove function *) + Remove := 1; (* Turn on the bit to indicate there is an item to be removed from this FIFO *) + end_if; + if ((BasinToMaster[Basin].BWFilterData[Filter].RemoveFTW) and QueueNumber = 3) then (* if this FIFO is the FTW and there is a filter to remove *) + RemoveFilterNumber := ((Basin-1) * 6) + Filter; (* if this filter number is to be removed, remember it for remove function *) + Remove := 1; (* Turn on the bit to indicate there is an item to be removed from this FIFO *) + end_if; + if (QueueNumber = 2 and BasinToMaster[Basin].BWFilterData[Filter].BW_Perm)then (* Is this the backwash FIFO and backwash permissive met *) + Queue[Pointer].Permissive := 1; + elsif (QueueNumber = 3 and BasinToMaster[Basin].BWFilterData[Filter].FTW_Perm )then (* Is this the filter to waste FIFO and filter to waste permissive met *) + Queue[Pointer].Permissive := 1; + end_if; + end_for; +end_for; + +(* Iterate throught the FIFO and figure out the permissive for any filter in the FIFO *) +for Queue_Item := 1 to 12 Do + Case Queue[Queue_Item].FilterNumber of (* If there is a filter number in the queue *) + 1..6: Basin := 1; (* determine what its basin number is to get *) + 7..12: Basin := 2; (* the permissive out of the basin to master data structure *) + else + Basin := 0; + end_case; + BasinFilter := Queue[Queue_Item].FilterNumber - ((Basin-1) * 6); (* Calculate the basin filter number out of filter number *) + if (QueueNumber = 2 and BasinToMaster[Basin].BWFilterData[BasinFilter].BW_Perm)then (* Is this the backwash FIFO and backwash permissive met *) + Queue[Queue_Item].Permissive := 1; + elsif (QueueNumber = 3 and BasinToMaster[Basin].BWFilterData[BasinFilter].FTW_Perm )then (* Is this the filter to waste FIFO and filter to waste permissive met *) + Queue[Queue_Item].Permissive := 1; + else + Queue[Queue_Item].Permissive := 0; + end_if; +end_for; + + +(* Get top item out of the FIFO *) +if Get then + for Filter := 1 to 11 Do (* Iterate through the queue and move up the items below the first element *) + Queue[Filter].FilterNumber := Queue[Filter+1].FilterNumber; (* Move up next item to current item *) + Queue[Filter].Selected := Queue[Filter+1].Selected; + Queue[Filter].Permissive := Queue[Filter+1].Permissive; + end_for; + if Pointer > 1 then + Pointer := Pointer - 1; (* Need to decrement pointer when removing one from the top *) + End_if; + Queue[12].FilterNumber := 0; (* Zero out the 40th filter number *) + Queue[12].Selected := 0; (* Zero out the 40th selected item *) + Queue[12].Permissive := 0; (* Zero out the 40th permissive item *) +end_if; + + +(* Remove item from the FIFO *) +RemoveFound := 0; (* Reset the Remove Item Found bit for remove logic below *) +if Remove then (* To remove an item from the FIFO, loop through the FIFO and check for *) + for Filter := 1 to 11 Do (* the filter number to remove *) + if (Queue[Filter].FilterNumber = RemoveFilterNumber) then + RemoveFound := 1; (* If found, turn on Remove Item Found bit *) + end_if; + if RemoveFound then (* For every element after the removed item, move up the FIFO by one *) + Queue[Filter].FilterNumber := Queue[Filter+1].FilterNumber; (* Move next filter number to current filter number *) + Queue[Filter].Selected := Queue[Filter+1].Selected; (* Move next selected to current, which will be off anyway *) + Queue[Filter].Permissive := Queue[Filter+1].Permissive; (* Move next selected to current, which will be off anyway *) + end_if; + end_for; + if Pointer > 1 and RemoveFound then (* Move pointer up if a filter is removed *) + Pointer := Pointer - 1; + End_if; + Queue[12].FilterNumber := 0; (* Zero out the 40th filter number *) + Queue[12].Selected := 0; (* Zero out the 40th selected item *) + Queue[12].Permissive := 0; (* Zero out the 40th permissive item *) + RemoveFilterNumber := 0; + Remove := 0; (* Turn off the remove bit since it has just been removed *) + SelectedFilter := 0; (* The selected filter is now gone since it just got removed, so zero this out *) +end_if; + +(* Remove all of one basin's filters from the FIFO given the basin number *) +if FiltersToRemove > 0 then (* To remove all filters of one basin from the FIFO, loop through the FIFO and check for *) + for Filter := 1 to 12 Do (* the filter number to remove *) + if REAL_TRUNC_INT(INT_TO_REAL(Filter-1)/INT_TO_REAL(6)+1.0) = FiltersToRemove then (*Caclculate all filters withine that basin by truncating decimal part *) + for Queue_Item := 1 to 11 Do (* Check each item in the whole queue *) + if (Queue[Queue_Item].FilterNumber = Filter) then (* If the current queue item has one of the 5 filter numbers, then begin to delete it. *) + for Temp_Item := Queue_Item to 11 Do (* Temporarily loop through the remaining items to move them up after deleting an item. *) + Queue[Temp_Item].FilterNumber := Queue[Temp_Item+1].FilterNumber; (* Move next filter number to current filter number *) + Queue[Temp_Item].Selected := Queue[Temp_Item+1].Selected; (* Move next selected to current, which will be off anyway *) + Queue[Temp_Item].Permissive := Queue[Temp_Item+1].Permissive; (* Move next selected to current, which will be off anyway *) + End_for; + if Pointer > 1 then (* Move pointer up if a filter is removed *) + Pointer := Pointer - 1; + End_If; + End_if; + End_For; + Queue[12].FilterNumber := 0; (* Zero out the 40th filter number *) + Queue[12].Selected := 0; (* Zero out the 40th selected item *) + Queue[12].Permissive := 0; (* Zero out the 40th permissive item *) + end_if; + end_for; + FiltersToRemove := 0; (* Zero out of the Basin to be removed once this routine has executed *) +end_if; + +(* Put selected item on top of the FIFO *) +if (Top and (SelectedFilter > 0)) then + for Filter := 1 to 12 Do + if (Queue[Filter].Selected = 1) then + temp.FilterNumber := Queue[Filter].FilterNumber; + temp.Selected := 0; + for i := Filter to 12 do (* Shift FIFO items up starting from the location where the selected items was *) + Queue[i].FilterNumber := Queue[i+1].FilterNumber; (* Assign the next FIFO item to this item *) + Queue[i].Selected := Queue[i+1].Selected; + Queue[i].Permissive := Queue[i+1].Permissive; + end_for; + for i := 12 to 2 by -1 do (* Always shift queue items down when inserting a FIFO item to the top of the queue *) + Queue[i].FilterNumber := Queue[i-1].FilterNumber; (* 39th element moves to the 40th, 38th element moves to the 39th... *) + Queue[i].Selected := Queue[i-1].Selected; (* Stop at item 2 so the FIFO item that was selected for top can be inserted in 1 *) + Queue[i].Permissive := Queue[i-1].Permissive; + end_for; + End_if; + End_for; + Queue[1].FilterNumber := temp.FilterNumber; (* Assign previously selected FIFO item to the first element in the FIFO *) + Queue[1].Selected := temp.Selected; + Queue[1].Permissive := temp.Permissive; +End_if; + +for Filter := 1 to 12 do (* Iterate through the In Queue Status array and clear out any with this queues number *) + if (MasterToBasin.FilterData[Filter].IN_Q_Status = QueueNumber) then + MasterToBasin.FilterData[Filter].IN_Q_Status := 0; (* Zero out in queue status array if it matches this queues number *) + end_if; +end_for; + +for Queue_Item := 1 to 12 do + Queue[Queue_Item].CommFail := 0; +end_for; + +for Filter := 1 to 12 do + for Queue_Item := 1 to 12 Do + if Queue[Queue_Item].FilterNumber = Filter then + Queue[Queue_Item].CommFail := CommFails[Filter]; (* Iterate though the communication failure array and assign to the FIFO *) + end_if; + end_for; +end_for; + + +for Filter := 1 to 12 do (* Iterate through the FIFO looking for a selected filter *) + if (Queue[Filter].Selected = 1) then + SelectedFilter := Queue[Filter].FilterNumber; (* If this filter is selected, send it's number out *) + NumberOfSelected := NumberOfSelected + 1; (* Keep a total of selected filters, should be 0 or 1 *) + end_if; + if (Queue[Filter].FilterNumber > 0) then (* while iterating through the queue, assign the Filter In Queue status so filters know if it is in the queue *) + MasterToBasin.FilterData[Queue[Filter].FilterNumber].IN_Q_Status := QueueNumber; (* Determine each filter's in queue status *) + end_if; + +end_for; +if LT (IN1 := NumberOfSelected,IN2 := 1) then (* If the number of filters selected is zero, then zero out the output *) + SelectedFilter := 0; +end_if; +NumberOfSelected := 0; (* Zero out number of selected filter to be ready to check next scan *) +NextFilter := Queue[1].FilterNumber; + + + + + DDT for us in the Backwash and Filter to Waste FIFOs + + + + Filter Selected for removal or go to top + + + Filter Number needing backwash + + + Permissive Status of filter 0 = No Permissve, 1 = Permissive + + + Communications Failure with the Basin PLC + + + + + DDT for sending master data to each basin PLC + + + + Packed Bits for Basin + + + Blower System Auto Ready Status + + + + Washwater System Auto Ready Status + + + + Blower Running Status + + + + Washwater Pump Running Status + + + + Maximum Number of Filters are running Drawdown + + + + Maximum Number of Filters are running Backwash + + + + Maximum Number of Filters are running Filter To Waste + + + + Wash Water Tank Low Level + + + + Reclaim Basin Auto Ready Status + + + + Recllaim Basin High High Level + + + + Blower Low Air Flow for Backwash Sequennce + + + + Wash Water Pump Speed Ramp Done + + + + Wash Water Flow Control Valve Position Ramp Done + + + + Filter Number that should go into the Draw Down portion of the Backwash Sequence + + + Filter Number that should go into the Backwash portion of the Backwash Sequence + + + Filter Number that should go into the Filter To Waste portion of the Backwash Sequence + + + Filter Number that should be deteted from the Draw Down Queue + + + Filter Number that should go to the top of the Draw Down Queue + + + Filter Number that should be deteted from the Bask Wash Queue + + + Filter Number that should be deteted from the Filter To Waste Queue + + + Filter Number that has the common equipment + + + WatchDog (use seconds from clock) + + + Master Level PID Output + + + WashWater Flow Total to be used for each filter + + + Individual Filter Data + + Filter1 + + + Filter2 + + + Filter3 + + + Filter4 + + + Filter5 + + + Filter6 + + + Filter7 + + + Filter8 + + + Filter9 + + + Filter10 + + + Filter11 + + + Filter12 + + + + + + DDT for sending Individual Filter Data (used in ddt_Comss_MToB) to Master PLC + + + + Packed Bits for Each Filter + + + Level Mode Permissive from Master + + + + Which Queue a filter is in 0=none, 1=DD, 2=BW, 3=FTW + + + Wash Water Flow Total for Last Backwash + + + + + Sorting Queue of Queue Items with filter number, filter priority, time stamp + + + + + Array of Priroities that is generated from the basin PLCs + + + + + + + Array of Time Stamps that is generated from the basin PLCs + + + + Number of this queue. Used in queue status sent to basins + + + + Input for first scan bit + + + + + + The Queue made up of an array of Queue Items + + + + Basin to Master Structure from all Basin PLCs + + + + Structure of comm data to send to basins + + + + + + Next Filter to run + + + + Selected Filter for remove or go to top + + + + + + + + + + + + + + + + + + + + (* Initialize Now array with current system time *) +Now[0] := %SW50; +Now[1] := %SW51; +Now[2] := %SW52; +Now[3] := %SW53; + +(* Zero out Purge Queue before re-initializing it. *) +for i := 1 to 12 Do + Queue[i].FilterNumber := 0; + Queue[i].Priority := 0; + Queue[i].CommFail := 0; + Queue[i].TimeStamp := ARINT_TO_DT (Now); (* Make TimeStamp equal to current system time *) +end_for; +NextFilter := 0; +(* Iterate through all Filter backwash priorities *) +for Filter := 1 to 12 Do + if (Priorities[Filter] > 0) then (* Filter has a non zero priroity (zero means no backwash)*) + Filter_in_queue := 0; (* Flag used in for loop below to prevent checking for priority after already inserted into queue *) + for queue_item := 1 to 12 do (* Need to iterate through the queue and determine where this current filter goes *) + (* Insert into the queue because prority is less than current queue item *) + UsePriority := (Priorities[Filter] < Queue[queue_item].Priority); + (* Insert into the queue because prioirities are equal but timestamp is older *) + UseTimeStamp := (Priorities[Filter] = Queue[queue_item].Priority) and (LT_DT (TimeStamps[Filter], Queue[queue_item].TimeStamp)); + (* Insert by Priority or Time Stamp or if queue item is empty and the filter is not already in the queue *) + if ((UsePriority or UseTimeStamp or (Queue[queue_item].Priority = 0)) and not Filter_in_queue) then + for i := 12 to queue_item by -1 do (* Always shift purge queue items down when inserting a Filter in the queue *) + Queue[i].FilterNumber := Queue[i-1].FilterNumber; (* 39th element moves to the 40th, 38th element moves to the 39th... *) + Queue[i].Priority := Queue[i-1].Priority; + Queue[i].Permissive := Queue[i-1].Permissive; + Queue[i].CommFail := Queue[i-1].CommFail; + Queue[i].TimeStamp := Queue[i-1].TimeStamp; + Queue[i].TimeStampStr := Queue[i-1].TimeStampStr; + end_for; + Queue[queue_item].FilterNumber := Filter; (* Insert the filter number in the queue at the index "queue_item" after shifting down lower priority items *) + Queue[queue_item].Priority := Priorities[Filter]; (* Insert the Filter's BW priority also *) + Case Filter of (* Get the drawdown permissive from the basin data structure *) + 1..6: Basin := 1; (* Which basin is the filter in? *) + 7..12: Basin := 2; + end_case; + + BasinFilter := Filter - ((Basin-1) * 6); (* Calculate the basin filter number out of all 40 filters *) + + + if BasinToMaster[Basin].BWFilterData[BasinFilter].DD_Perm then + Queue[queue_item].Permissive := 1; (* If Permissive is good assign 1 *) + else + Queue[queue_item].Permissive := 0; (* else assign 0 *) + end_if; + Queue[queue_item].CommFail := CommFails[Filter]; (* Insert the Filter's Comm Fail Status also *) + Queue[queue_item].TimeStamp := TimeStamps[Filter]; (* Insert the Filter's Time Stamp priority also *) + if EQ_DT (Queue[queue_item].TimeStamp, DT#1990-01-01-00:00:00) then + Queue[queue_item].TimeStampStr := ' '; + else + Queue[queue_item].TimeStampStr := DT_TO_STRING (TimeStamps[Filter]); (* Convert each time stamp to a string for the HMI *) + end_if; + Filter_in_queue := 1; (* Now that we have inserted a Filter in the queue, no need to keep inserting until we try the next Filter *) + end_if; + end_for; + NumberOfSelected := 0; + for queue_item := 1 to 12 do (* Iterate through the queue looking for a selected filter. *) + if (Queue[queue_item].Selected = 1) then + SelectedFilter := Queue[queue_item].FilterNumber; (* If this filter is selected, send it's number out *) + NumberOfSelected := NumberOfSelected + 1; (* Keep a total of selected filters, should be 0 or 1 *) + end_if; + end_for; + if LT (IN1 := NumberOfSelected,IN2 := 1) then (* If the number of filters selected is zero, then zero out the output *) + SelectedFilter := 0; + end_if; + NextFilter := Queue[1].FilterNumber; + end_if; + if (MasterToBasin.FilterData[Filter].IN_Q_Status = QueueNumber) then (* If the In Queue Status has this Queues number then zero it for next logic *) + MasterToBasin.FilterData[Filter].IN_Q_Status := 0; + end_if; + if Priorities[Filter] > 0 then (* while iterating through the priorities, assign the Filter In Queue status so filters know if it is in the queue *) + MasterToBasin.FilterData[Filter].IN_Q_Status := QueueNumber; (* Determine each filter's in queue status *) + end_if; +end_for; + +counter := counter + 1; + + + + + Resets all the selected statuses in the Sorting Queue + + + + + Queue used to iterate through + + + + + + Index + + + + (* Iterate through the Queue and reset all the selects *) +for filter := 1 to 12 Do + Queue[filter].Selected := 0; +end_for; + + + + + DFB used to lookup the value of the priority of the specified filter + + + + + Basin to Master Structure from all Basin PLCs + + + + Filter Number to find value of priority + + + + Priority to look for + + + + + + The Filter Number has the requested priority + + + + + + Filter Index + + + Basin Index + + + + (* See if the specified filter has the specified priority *) + +Case FilterNumber of (* which basin is the filter in? *) + 1..6: Basin := 1; + 7..12: Basin := 2; +end_case; + + +Filter := FilterNumber - ((Basin-1) * 6); (* Calculate the filter number out of all 40 filters *) + + + +if (FilterNumber = 0) then + Found := 0; +elsif (BasinToMaster[Basin].BWFilterData[Filter].Priority = PriorityToFind) then + Found := 1; +else + Found := 0; +end_if; + + + + + DFB used to lookup the value of the time stamp of the specified filter + + + + + Basin to Master Structure from all Basin PLCs + + + + Filter Number to find value of Time Stamp + + + + Time Stamp to look for + + + + + + The Filter Number has the requested time stamp + + + + + + Filter Index + + + Basin Index + + + + (* See if the specified filter has the specified timestamp *) +Case FilterNumber of (* which basin is the filter in? *) + 1..6: Basin := 1; + 7..12: Basin := 2; +end_case; + +Filter := FilterNumber - ((Basin-1) * 6); (* Calculate the filter number out of all 40 filters *) + + +if (FilterNumber = 0) then (* If the filter number is zero, then turn off found *) + Found := 0; +elsif EQ_DT (BasinToMaster[Basin].BWFilterData[Filter].TimeStamp , TimeStampToFind) then + Found := 1; +else + Found := 0; +end_if; + + + + + PID Control Block using PI_B function + + + + + 1=PID calculates Actuator Setpoint, 0=Manual value for Actuator Setpoint + + + + Process Value to be controlled + + + + 1=PV signal is valid for control, 0=PV not valid + + + + Setpoint for PID control of Process Variable + + + + CV for actuator when PID control in Manual + + + + 1=Actuator ready to be controlled + + + + Actual Actuator CV Feedback + + + + Reset for Faults + + + + + + ddt_PID_Control + + + + + + Control Variable sent to actuator + + + + At least one alarm on this device is active + + + + 1=Error in Config; see detail bits for reason + + + + + + PID for Process Control + + + Buffer for building Val_sts + + + Buffer for building Val_Fault + + + 1=Display "Bad" Alarm Priority Icon + + + Buffer for building Val_Notify + + + Count of unacknowledged alarms + + + Deviation Alarm + + + Unable to control alarm + + + Display Library for Faceplate call-up + + + Must contain DFB name, used for HMI and Information S/W + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + If there are is no other Alarm informatio to display then show if any alarm is Shelved or Disabled + + + ============================================================ +NOTIFICATION VALUE for HMI +============================================================ +Indicate the current alarm notification level as the max of any of the alarms, +set the low-order bit for reset or ack required +and set bit 5 to indicate bad signal state: +0 = Not in alarm, acknowledged +3 = Low Priority, Not in alarm, unacknowledged +5 = Medium Priority, Not in alarm, unacknowledged +7 = High Priority, Not in alarm, unacknowledged +9 = Critical Priority, Not in alarm, unacknowledged +16 = Alert Priority +18 = Low Priority, In alarm, acknowledged +19 = Low Priority, In alarm, unacknowledged or reset required +20 = Medium Priority, In alarm, acknowledged +21 = Medium Priority, In alarm, unacknowledged or reset required +22 = High Priority, In alarm, acknowledged +23 = High Priority, In alarm, unacknowledged or reset required +24 = Critical Priority, In alarm, acknowledged +25 = Critical Priority, In alarm, unacknowledged or reset required +26 = Communications Failure +28 = Shelved or Suppressed (only if no other alarms) +30 = Disabled +35 = Bad Signal, Low Priority, Not in alarm, unacknowledged +37 = Bad Signal, Medium Priority, Not in alarm, unacknowledged +39 = Bad Signal, High Priority, Not in alarm, unacknowledged +48 = Bad Signal, Alert Priority +50 = Bad Signal, Low Priority, In alarm, acknowledged +51 = Bad Signal, Low Priority, In alarm, unacknowledged or reset required +52 = Bad Signal, Medium Priority, In alarm, acknowledged +53 = Bad Signal, Medium Priority, In alarm, unacknowledged or reset required +54 = Bad Signal, High Priority, In alarm, acknowledged +55 = Bad Signal, High Priority, In alarm, unacknowledged or reset required + + + Limit Fail Maximum Severity to 1000 (750 for FAT) + + + This rung identifies: +* if any alarm reset or other reset is required; and +* if any reset or acknowledge from the operator is required. + + + Count number of un-acknowledged alarms and set Annunciate bit if any alarm needs operator attention. + + + Pass Unshelve requests to all alarms. + + + If not enabled then write disabled setpoint to actuator setpoint + + + If Tagged Out Of Service then override icon display to show that + + + ============================================================ +ALARM RESET COMMAND HANDLING +============================================================ +This rung handles the Alarm Reset Input and Commands +and the "Ack" Operator Command. + + + ================================================================== +PID Control for Process Value +================================================================== + + If ANY alarm is Disabled, Inhibited or Suppressed, set the Alarm Inhibit +summary status bit (which puts the "S" box on the graphic symbol). + + + ============================================================ +NOTIFICATION VALUE for Device +============================================================ +Get highest notification value from all internal alarms but PLCIOFault will override if faulted. + + + If there is a communications failure then override icon display to show that + + + Copy Actuator Setpoint to dfb output + + + If IO Fault then set bit on AENotifyAll to trigger display of "Bad" Alarm Priority Icons + + + ============================================================ +ALARM PROCESSING +============================================================ +The alarm is ALWAYS allowed to Exist (Cfg_HasXxxAlarm can be 1). + + + PID Control + +If enabled then will use PID to calculate setopint to send to actuator. +If not enabled then will send disabled setpoint instead. +If actuator not ready then will track actuator position/speed feedback. + + + PID Control Status 0=unknown 1=Tracking 2=Manual/Override 3=Auto + + + This rung handles the reports of all Bad Configuration Status. +Individual bits are provided for various status: +Bad Alarm configuration is determined by the P_Alarm instruction. + +Then a summary Bad Config status is provided, simply an OR of the individual bits. + + + If Auto is called for but either the PV signal or the actuator is not ready or valid for control then signal alarm. + + + Calculate deviation from setpoint as a percentage of the PV span. +If larger than the deviation alarm setpoint then start deviation alarm timing. +When timed out then will signal alarm. +Alarm does not change setpoint to actuator. + + + If ANY alarm is Disabled set the Out of Service +summary status bit (which puts the "OOS" box on the graphic symbol). + + + Suppress or Unsupress Alarms + + + if any one of the Alarms are on, set the general Alarm bit + + + If PV signal is not valid then zero actuator setpoint. + + + In case of IO Fault then use that notification value and also "Bad" icon. + + + + + + + + DDT for PID Analog Control using PI_B function, No Strings + + + + Setpoint for Controlled Process + + + Deviation alarm setpoint in percent plus or minus + + + Parameters for PI_B function + + + Operator HMI Signals + + + Set by HMI 0=Device in Manual 1=Device in Auto + + + + Operator Command to Acknowledged All Alarms in this DFB + + + + Operator Command to Reset All Alarms in this DFB + + + + 1=Ready for OCmd_Ack (enables HMI button) + + + + 1=Ready for OCmd_Reset (enables HMI button) + + + + Program Command Bits from PLC Logic + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Setpoint to Control Actuator + + + Device Confirmed Sts 0=? 1=Closed 2=Opened 5=Closing 6=Opening + + + Device Fault Status 0=None, 16=Fail to Open, 17=Fail to Close, 32=I/O Fault, 34=Config Error + + + Highest Alarm prio and ack status this object only (enum) + + + Current Alarm Level and Acknowledgement (enumeration) + + + Count of Unacknowledged Alarms + + + Common Status Signals + + + At least one alarm on this device is active + + + + Device is ready for Auto Control + + + + Any Alarm is Shelved or Disabled + + + + 1=A latched alarm or shed condition is ready to be reset + + + + 1=An alarm is ready to be acknowledged + + + + 1=Error in Config: see detail Err_ bits for reason + + + + 1=Error in Config: Alarm Min On Time, Shelf Time, Severity + + + + 1=Error in Config: Restart Inhibit Time (use 0 to 2147483) + + + + 1=Show Out of Service Icon + + + + Status signals particular to this device + + + 1=Lopp Mode is Auto, CV is calculated by PID to achieve SP + + + + 1=Loop Mode is Manual, CV is set by Manual CV + + + + 1=CV is set by actuator feedback + + + + 1=Hand FB (Tieback) Value is Bad (quality) or invalid or comms fault + + + + 1=Device Not Ready, see detail bits for reason + + + + Combined Alarm Value Notification for HMI + + + Deviation Alarm DDT + + + Unable to control Alarm DDT + + + + + DDT for Master Setpoints to Basin PLCs + + + + Auto Queing enable bits packed into integer + + + Auto Enable for Auto Queueing based on Turbidity + + + + Auto Enable for Auto Queueing based on Loss of Head + + + + Auto Enable for Auto Queueing based on Runtime + + + + Auto Enable for Auto Queueing for Refresh + + + + Max Filter Effluent Flow Master Setpooint + + + Filter Effluent Flow Master Setopint + + + Level Control Low Level Range Master Setpoint + + + Level Control High Level Range Master Setpoint + + + Backwash Drain Down Level Master Setpoint + + + Backwash Drain Level Time Master Setpoint + + + Air Wash Only Time Master Setpoint + + + Air Wash Abort High Level Master Setpoint + + + Air Wash and Water Time Master Setpoint + + + Washwater Request Delay Master Setpoint + + + No Air Low Water Time Master Setpoint + + + Washwater Pump 1st Low Flow Speed Master Setpoint + + + High Flow Wash Water Time Master Setpoint + + + Washwater Pump High Flow Speed Master Setpoint + + + Low Flow Wash Water Time Master Setpoint + + + In Service Level Master Setpoint + + + Hold Time Master Setpoint + + + Refill Timer Master Setpoint + + + Filter to Waste Valve Control Deadband Master Setpoint + + + Filter to Waste Volume Master Setpoint + + + Filter to Waste Time Master Setpoint + + + Maximum Turbidity allowed at end of Filter to Waste + + + Maximum Hours of Runtime until a BW is needed + + + Maximum Head Loss until a BW is needed + + + Maximum Turbidity until a BW is needed + + + Hours until a refresh BW is needed + + + Maintanence Refresh Wash Water Pump Speed Master Setpoint + + + Maintanence Refresh Wash Water Time Master Setpoint + + + Washwater Pump 2nd Low Flow Speed Master Setpoint + + + Washwater Valve 1st Low Flow Position Master Setpoint + + + Washwater Valve High Flow Position Master Setpoint + + + Washwater Valve 2nd Low Flow Position Master Setpoint + + + Washwater 1st Low Flow Ramp Time Master Setpoint + + + Washwater High Flow Ramp Time Master Setpoint + + + Washwater 2nd Low Flow Ramp Time Master Setpoint + + + Low Water Time Master Setpoint + + + Open FTW Skip Openning Time Master Setpoint + + + In-Service Turbidity Master Setpoint + + + Maintenance Refresh Washwater Valve Master Setpoint + + + Maintenance Refresh Washwater Ramp Time Master Setpoint + + + Rinse to Waste Low Wash Time Master Setpoint + + + Extended Filter to Waste Time Master Setopint + + + Auto Suggest Turbidity High Alarm Limit + + + Auto Suggest Refresh Due Alarm Limit + + + Auto Suggest Loss of Head High Alarm Limit + + + Auto Suggest Runtime High Alarm Limit + + + Minimum Filter Level to Allow Backwash + + + Out of Service Backwash Drain Down Level Master Setpoint + + + Out of Service Backwash Drain Level Time Master Setpoint + + + Filter Level for Maximum Flow + + + Filter Level for Minimum Flow + + + Filter Level to Start Low Flow Limiting + + + Filter Level to Start High Flow Limiting + + + Maximum Filter Out of Service Time Setpoint + + + Filter Rapid Drawdown Level Setpoint + + + + + DFB used to total up all the filters requesting level mode + + + + + + + + + + + + + + + Index to iterate through filters of a basin + + + Index to itereate through basins + + + + (* Interate through the basin data structure and count up how many filters are requesting level mode *) +Count := 0; +for Basin := 1 to 2 Do + for Filter := 1 to 6 Do + if (BasinToMaster[Basin].BWFilterData[Filter].LModeRequest) or (BasinToMaster[Basin].BWFilterData[Filter].LModeStatus) then + Count := Count + 1; + end_if; + end_for; +end_for; + + + + + DDT for the Number of Filters in service calculations + + + + + + + + Motor with one output (Run) + + + + + 1 = remote/local input wired 0 = not wired + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + Device Running Status + + + + Motor Fail Status from Motor Controller + + + + Set to 1 if there is an auto routine. Used to hid or show Auto display on HMI + + + + Used to reset all alarms in the PLC + + + + Locked by program (ESD) + + + + Auto Start from Auto Logic + + + + Auto Stop from Auto Logic + + + + Enables Feedback from Field + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + + + System Time + + + + Motor DDT + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + + + Device Run Command + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm is latched and all latched alarms are resetable + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + Fail to Start, Fail to Stop or Motor Failure alarm is active + + + + Restart Delay Remaining: in seconds + + + + Device Failed to Start + + + + Device Failed to Stop + + + + General Failure Alarm from Motor Drive + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + + Inhibit Motor Start Timer Preset + + + Inhibit Motor Start Timer Preset Real + + + Device Failed to Start Alarm + + + Device Failed to Stop Alarm + + + General Failure Alarm from Motor Drive + + + Internal Stop Command + + + Internal Start Command + + + + + + Motor Run Time Accumulation. + + + Motor Run Time Minutes Timer Done + + + + Time for First Scan + + + Internal Run State 1 = Motor should be running 0 = Motor should be stopped. + + + PLC IO Fault Alarm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Minute + + + Call the Alarm AOI for the Motor Failure + + + Reset Runtimes if the reset button has been pressed + + + MTR.almMotorFailure.AEShelveDuration: Shelve Timer Preset Time + + + Un-Shelve All Alarms. + + + MTR.RTYesterdayHrs: Run Time Hours Yesterday. + + + Month + + + ATRM: Alarm Time Remaining: Seconds Until Alarm Trips. + + + Device Running Status + + + Day + + + MTR.almPLCFault.AEShelveDuration: Shelve Timer Preset Time + + + Manual Stop Command from HMI. + + + MTR.RTTotalHrs: Run Time Hours Total Since Last Reset. + + + Motor Run Timer + + + MTR.RTTodayHrs: Run Time Hours Today/Current. + + + Move desired set time into the Inhibit Timer if it's not the First Scan. + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + Reset Runtime Command from HMI + + + Motor Run Time Accumulcation + Motor Run Timer Elapsed time. + + + Monitor a START request for the present state to set the INTERNAL START +PC_MAN and PC_AUTO) only work if in remote (or remote is not enabled) and the inhibit timer is done. +If remote is enabled and in local, monitor for local starts to support bumpless transfer to Remote. + + + Manual Acknowledge Command from HMI. + + + Find the shortest alarm time remaining: +Start by setting alarm time remaining very high. +Then for each alarm, if its fault is active and its time remaining is less than the current value of alarm time remaining, then set its time remaining as the overall alarm time remaining. + + + Shelve All Alarms. + + + Seconds + + + Restart Delay Remaining: in Seconds. + + + Reset Runtime Command from HMI. + + + Locked by program. (ESD) + + + if any one of the aknowledged bits are on, set the GenAlarmAcked bit + + + IF the motor is running, update the last run date for the motor. + + + Day + + + Map Items from DDT + + + Motor Run Time Minutes Timer Done + + + MTR.TodayMin: Run Time Minutes Today. + + + Motor Run Time Minutes Timer Done + + + MTR.STYD: Count of Starts Yesterday. + + + Motor Run Status + + + Reset Runtime Command from HMI. + + + MTR.almFailToStrt.AEShelveDuration: Shelve Timer Preset Time + + + MTR.RTTotalHrs: Run Time Hours Total Since Last Reset. + + + Inhibit Motor restart. + + + Mintes + + + Inhibit Timer Preset + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + Motor Runtime Accumulator Logic. +The timer accumulator in units of milliseconds up to 1 minute. + + + ATRM: Alarm Time Remaining: Seconds Until Alarm Trips. + + + Minute + + + Device Running Status one shot. + + + Map Items to DDT + + + Motor Run Time Minutes Timer Done + + + Month + + + Tagged Out of Service. + + + Device is ready for auto control. + + + Set all Alarm DFB's Shelve Duration Time. The HMI is using "almFailToStrt" for the initial Shelve Duration. + + + MTR.STTD: Count of Starts Today. + + + MTR.RTTodayHrs: Run Time Hours Today/Current. + + + MTR.RTTodayMin: Run Time Minutes Today. + + + MTR.TodayMin: Run Time Minutes Today. + + + MTR.RTYesterdayMin: Run Time Minutes Yesterday. + + + MTR.RTTotalMin: Run Time Minutes Since Last Reset. + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + +Clear operator control bits + + + Run Time Minutes Today. + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips. + + + When the one minute timer is done: +Reset the timer. +Add one to todays run time minutes. +If todays runtime minutes goes over 59, add one to todays run time hours and clear the minutes. +Add one to the total run time minutes. +If the total runtime minutes goes over 59, add one to the total run time hours and clear the minutes. + + + Hours + + + Seconds + + + Locked by program. (ESD) + + + Restart Delay: Seconds to inhibit motor start after motor stops. + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + Total Count of Device Starts Since last starts reset. + + + Hour + + + Day + + + Manual Start Command from HMI. + + + Set commmon fail and LOCKOUT a motor in the event of a failure + + + Unlatch MtrRunTime_MinuteDone + + + At least one alarm on this device is active. + + + Seconds + + + MTR.RTYesterdayHrs: Run Time Hours Yesterday. + + + Call the Alarm AOI for the IO PLC Fault + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips. + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + MTR.almFailToStrt.AEShelveDuration: Shelve Timer Preset Time + + + This timer is used to allow a 1 second delay to capture the accumulated time when the motor stops. + + + if any one of the Annunciate bits are on, set the general GenAnnunciate bit. + + + MTR.almFailToStop.AEShelveDuration: Shelve Timer Preset Time + + + MTR.RTTotalMin: Run Time Minutes Since Last Reset. + + + Set by HMI +1= Device in Auto +0= Device in Manual + + + Call the Alarm AOI for the fail to start alarm + + + On start request, latch the internal run bit and hold until stop request or motor failure. + + + MTR.RTTodayHrs: Run Time Hours Today. + + + Year + + + Run Time Minutes Since Last Reset. + + + MTR.almFailToStrt.AEShelveDuration: Shelve Timer Preset Time + + + MTR.RTTotalHrs: Run Time Hours Total Since Last Reset. + + + MTR.RTTodayMin: Run Time Minutes Today. + + + Reset Motor Run Timer Accumulation to 0. + + + Manual Stop Command from HMI. + + + MTR.RTTodayHrs: Run Time Hours Today/Current. + + + MTR.RTTotalMin: Run Time Minutes Since Last Reset. + + + Move a 0 into the Inhibit Timer to Finish the timer on First Scan. + + + MTR.RTYesterdayMin: Run Time Minutes Yesterday. + + + Count of Starts Today. +Total Count of Device Starts since last starts reset. + + + Year + + + Hours + + + Reset: Command from HMI to Reset all alarms on this device. + + + Clear operator control bits + + + Count of Starts Today + + + Reset Count of Starts Command from HMI. + + + if any one of the Alarms are on, set the general GenAlarm bit + + + Output run command if the motor should be running. + + + Reset Count of Starts Command from HMI + + + Call the Alarm AOI for the fail to stop alarm + + + Suppress All Alarms. + + + Hours + + + Move Alarm Notify # to 0 if no Alarms are active. + + + Month + + + MTR.RTTotalMin: Run Time Minutes Since Last Reset. + + + Count of Starts Today + + + Motor Run Time Accumulation. +This is used to capture the seconds when motor stops and keep that total to correctly count to a minute. + + + Monitor a STOP request for the present state to set the INTERNAL STOP +PC_MAN and PC_AUTO Stops have effect if in remote (or remote is disabled) +If remote is enabled and in local, monitor motor stop to support bumpless transfer to remote. + + + Year + + + Minutes + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Remote: +1= Device in Remote +0= Device in Local + + + Un-Suppress All Alarms. + + + Reset: Command from HMI to Reset all alarms on this device. + + + Tagged Out of Service. + + + Total Count of Device Starts since last starts reset. + + + On the first scan that the current hour and minute is equal to the reset hour and minute (midnight): +Move todays totals into yesterdays totals and clear todays totals + + + MTR.STTD: Count of Starts Today. + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + MTR.RTTodayMin: Run Time Minutes Today. + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + MTR.RTTodayMin: Run Time Minutes Today. + + + Manual Start Command from HMI. + + + MTR.RTTodayHrs: Run Time Hours Today/Current. + + + Device is ready for auto control if it is in remote, in auto, not in alarm, not tagged out of service, and not interlocked. + + + Motor Run Status + + + Start, Stop, or Motor Failure + + + Detect Motor failure from examining the command compared to the feedback. +Motor Fail input blocks the fail to start alarm to keep alarms focused on the primary issue (motor fault) + + + + + + + + DDT for MTR1 Ladder DFB: Motor with 1 output, No Strings + + + + First Integer of packed Bits + + + Start Command from HMI + + + + Stop Command from HMI + + + + Displays the Info Tag + + + + Failed to Start Condition that triggers Fail to Start Alarm + + + + Failed to Stop Condition that triggers Fail to Stop Alarm + + + + Reset Command from Logic to Reset All Alarms in this DFB + + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + + Local/Remote Switch In Remote Position + + + + Motor Run Status + + + + Enables/Disables the Motor Failure Alarm + + + + Motor Failure Condition that triggers a Motor Failure Alarm + + + + Set to 1 if there is an auto routine. Used to hide or show Auto display on HMI + + + + Used to reset all alarms in the PLC + + + + Set by HMI 0 = Device in Manual 1 Device in Auto + + + + Locked out by program + + + + 1 remote/local input wired 0 = not wired + + + + Second Integer of packed Bits + + + Tagged Out of Service + + + + Auto Start from Auto Logic + + + + Auto Stop from Auto Logic + + + + Reset Runtime Command from HMI + + + + Reset Count of Starts Command from HMI + + + + Fail to Start + + + + Fail to Stop + + + + Motor Failure + + + + General Alarm Status + + + + General Acknowledged Status + + + + General Annunciate Status + + + + Resetable Status for all alarms in this DFB + + + + Fail to Start, Fail to Stop or Motor Failure alarm is active + + + + Device Run Command + + + + Device is ready for auto control + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Third Integer of packed Bits + + + General Alarm Shelved State + + + + General Alarm Suppressed State + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Shelve Command from HMI + + + + Suppress Command from HMI + + + + Enables Feedback from Field + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed Bits (SPARE) + + + Spare Integer + + + Spare Integer + + + Run Time Hours Today/Current + + + Run Time Minutes Today + + + Run Time Hours Total Since Last Reset + + + Run Time Minutes Since Last Reset + + + Run Time Hours Yesterday + + + Run Time Minutes Yesterday + + + Total Count of Device Starts since last starts reset + + + Count of Starts Today + + + Count of Starts Yesterday + + + Time the runtime was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + Time the starts counts was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + Date Last Run for HMI display + + Month + + + Day + + + Year + + + Hours + + + Minutes + + + Seconds + + + + Restart Delay: Seconds to inhibit motor start after motor stops + + + Restart Delay Remaining: in seconds + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Fail to Start Alarm DDT + + + Fail to Sop Alarm DDT + + + Motor Failure Alarm DDT + + + PLC IO Fault Alarm DDT + + + Combined Alarm Value Notification for HMI + + + + + Duty/Standby Selection For Pumps + + + + + Pump 1 is in REMOTE, AUTO and has no faults (1 = Auto Ready) + + + + Pump 2 is in REMOTE, AUTO and has no faults (1 = Auto Ready) + + + + + + + Pump 1 Running Status (1 = Running) + + + + Pump 2 Running Status (1 = Running) + + + + Conditions met to Start Duty Pump + + + + + + Pump DS DDT + + + + Pump DS DDT + + + + + + Pump 1 Call to Run + + + + Pump 2 Call to Run + + + + No Pumps are Available Alarm + + + + Pump Designated as DUTY is not Available and not Running + + + + Pump Designated as STANDBY is not Available and not Running + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Set Pump Sequence +1-2 + + + Duty/Standby DFB By Marcos Ojeda, Prime Controls 2/14/2020: +Version: +V1.0 + - This DFB configures two pumps to be DUTY or STANDBY Pump. + - DTSE Bit For Each Pump Triggers a 1-2 OR 2-1 Duty Standby Sequence + - Output Duty/Standby Selection As Well As No Duty/No Standby Pumps Selected. Use As HMI Notification + + + Pump designated as STANDBY Fail + + + Pump 2 Command to OUTPUT + + + If the DUTY pump is not available or not On then energize the output for the Pump designated as STANDBY. + + + Pump designated as DUTY Fail + + + When DUTY_START is triggered energize the output for the Pump designated as DUTY. +If the DUTY Pump is in LOCAL or MANUAL or has active alarms then trigger the STANDBY pump to run. + + + Pump 1 Command to OUTPUT + + + Set Pump Sequence +2-1 + + + Turn on the FAIL bit in the DDT if all the pumps are in local or if they have been called to run and are not running. + + + + + + + + DDT for Pump Duty/Standby DFB + + + + First Integer of Packed Bits + + + Set Pump as Duty from HMI + + + + Pump is the Duty Pump + + + + Pump is the Standby Pump + + + + + + For modulating valves with analog position command. + + + + + 1 = remote/local input wired + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + 1 = Open adn Close Feedback is Present + + + + Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + + Used to reset all alarms in the PLC + + + + Set to 1 if there is an auto routine. Used to hid or show Auto display on HMI + + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + + + + + Locked by program (ESD) + + + + PLC First Scan + + + + Valve Failure + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + For modulating valves with analog position command. DDT + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + + + Valve Position Command 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm is latched and all latched alarms are resetable + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + Position Feedback in % open + + + + + + Broken Loop Alarm + + + Under Range Alarm + + + Over Range Alarm + + + Valve Position Failure + + + PLC IO Fault Alarm + + + Valve Failure Alarm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + if any one of the Alarms are on, set the GenAlarm bit + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Call the Alarm AOI for the IO PLC Fault + + + VLVM.PO_SP: Position Setpoint in % open + + + Alarm Reset Command from HMI + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + VLVM.PO_SP: Position Setpoint in % open. + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + VLVM.AutoPO_SP: Auto Position Setpoint in % open + + + if any one of the acknowledged bits are on, set the GenAlarmAcked bit + + + ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + VLVM.PO_FB: Position Feedback in % open + + + Enable Broken Loop Alarm + + + HMI to Show Valve Opened Status. + + + VLVM.BL_SP: Raw Low Limit for Broken Loop + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + Map items to DDT + + + Test for a Broken loop fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.PO_SP: Position Setpoint in % open + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + Set to 1 if there is an remote status. Used to hide or show Remote Display on HMI + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + If Auto is disabled, force into manual mode. + + + if any one of the Faults are on, set the GenFault bit + + + If Remote is disabled, force into Remote mode. + + + Move Alarm Notify # to 0 if no Alarms are active. + + + If in auto, set the setpoint based on the auto setpoint. +If in manual, set the setpoint based on the manual setpoint. + + + Call the Alarm AOI for the Motor Failure + + + VLVM.ManPO_SP: Auto Position Setpoint in % open + + + HMI to Show Valve Close Command. + + + VLVM.OR_SP: Over Range Raw Alarm Limit + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + VLVM.PO_SP: Position Setpoint in % open + + + Call the Alarm AOI for the Position Fault (Open and Close Commands are based on position error greater than the deadband) + + + VLVM.PO_FB: Position Feedback in % open + + + Find the shortest alarm time remaining: +Start by setting alarm time remaining very high. +Then for each alarm, if its fault is active and its time remaining is less than the current value of alarm time remaining, then set its time remaining as the overall alarm time remaining. + + + VLVM.PO_DB: Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + If the position feedback indicates the valve is within the deadband of being opened or closed, then indicate that in the HMI. + + + PO_FB: Position Feedback in % open + + + If in auto, move auto position setpoint to manual position setpoint to support bumpless transfer from auto to manual. + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.PO_SP: Position Setpoint in % open + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.PO_DB: Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + Clear operator control bits + + + Test for a Under Range fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Test for a Over Range fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + HMI to Show Valve Open Command. + + + VLVM.PO_SP: Position Setpoint in % open + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + VLVM.PO_DB: Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + If Manual is disabled, force into AUTO mode. + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + HMI to Show Valve Closed Status. + + + Scale the input to % open. +Fail Closed valves are 0% open at 4,000 raw input and 100% at 20,000 raw input. +Fail Open valves are 100% open at 4,000 raw input and 0% at 20,000 raw input. + + + Broken Loop Fault. + + + Acknowledge: HMI Input to reset the AlarmAckd bit. + + + If tagged out of service or interlocked: +Move to the failed position (0% open for fail closed valves or 100% open for fail open valves) + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Map items from DDT + + + If in remote and there is feedback: +Determine if the valve needs to be opening or closing based on the position error and the size of the deadband. +These outputs are used on the HMI to show needed valve movement. + + + Broken Loop Alarm. + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + Device is ready for auto control if it is in remote, in auto, not in alarm, and not tagged out of service. + + + if any one of the Annunciate bits are on, set the GenAnnunciate bit + + + If in local, set the manual setpoint based on the feedback to support bumpless transition to remote in manual. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Suppress All Alarms. + + + Set to 1 if there is an auto routine. Used to hide or show Auto Display on HMI + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + Used to reset all alarms in the PLC + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. +##### V.1.4 Also latch the reset if swiched out of Remote and Remote is enabled. ##### + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + Alarm Reset Command from HMI + + + Scale the output from % open to raw current counts. +Fail Closed valves are 4,000 raw output for 0% open and 20,000 raw output for 100% open. +Fail Open valves are 20,000 raw output for 0% open and 4,000 raw output for 100% open. + + + VLVM.UR_SP: Under Range Raw Alarm Limit + + + + + + + + DDT for VLVM Ladder DFB: Variable Speed Motor, No Strings + + + + First Integer of packed Bits + + + 1 = remote/local input wired 0 = not wired + + + + Set to 1 if there is an auto routine. Used to hide or show Auto display on HMI + + + + 1 = Open and Close Feedback is Present 0 = No Feedback + + + + PLC First Scan + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + Valve Failure + + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Used to reset all alarms in the PLC + + + + Locked by program (ESD) + + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + + Enable Broken Loop Alarm + + + + Enable Over Range Alarm + + + + Position Failure Alarm Enable + + + + Enable Under Range Alarm + + + + Second Integer of packed Bits + + + Tagged Out of Service + + + + Suppress All Alarms + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm is latched and all latched alarms are resetable + + + + HMI to Show Valve Close Command + + + + HMI to Show Valve Open Command + + + + HMI to Show Valve Opened Status + + + + HMI to Show Valve Closed Status + + + + Broken Loop Alarm + + + + Position Failure Alarm (position error exceeded deadband for required delay) + + + + Current Position Error Exceeds Deadband + + + + Under Range Alarm + + + + Over Range Alarm + + + + One of the alarm conditions is currently set (may not be in alarm yet) + + + + Third Integer of packed bits + + + Device is ready for auto control + + + + Acknowledge: HMI input to reset the AlarmAckd bit. + + + + Alarm Reset Command from HMI + + + + Set by HMI 0 = Device in Manual 1 = Device in Auto + + + + Under Range Fault + + + + Broken Loop Fault + + + + Over Range Fault + + + + True indicates blue flag should be displayed. + + + + Shelve Command from HMI + + + + Shelved Status + + + + Suppress Command from HMI + + + + Suppressed Status + + + + Valve Failure Alarm + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed bits (SPARE) + + + 1 = Interlock Enabled, 0 = Interlock Disabled + + + + 1 = Valve Failure Enabled, 0 = Valve Failure Disabled + + + + Spare Integer + + + Spare Integer + + + Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Raw Low Limit for Broken Loop + + + Over Range Raw Alarm Limit + + + Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + Under Range Raw Alarm Limit + + + Auto Position Setpoint in % Open + + + Manual Position Setpoint in % Open + + + Position Setpoint in % open. + + + Valve Position Command 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Broken Loop Alarm DDT + + + Under Range Alarm DDT + + + Over Range Alarm DDT + + + Valve Position Failure DDT + + + PLC IO Fault Alarm DDT + + + Valve Failure Alarm DDT + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Position Feedback in % open + + + In % Open + is Open Past Setpoint + + + Combined Alarm Value Notification for HMI + + + + + For modulating valves with analog position command, Discrete Valve Limits, and Discrete Output + + + + + 1 = remote/local input wired + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + 1 = Open adn Close Feedback is Present + + + + Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + + Used to reset all alarms in the PLC + + + + Set to 1 if there is an auto routine. Used to hid or show Auto display on HMI + + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + + + + + Locked by program (ESD) + + + + PLC First Scan + + + + Valve Failure + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + + + + + + + For modulating valves with analog position command. DDT + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + + + Valve Position Command 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + + Close Command + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm is latched and all latched alarms are resetable + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + Position Feedback in % open + + + + + + Broken Loop Alarm + + + Under Range Alarm + + + Over Range Alarm + + + Valve Position Failure + + + PLC IO Fault Alarm + + + Valve Failure Alarm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + VLVM.OR_SP: Over Range Raw Alarm Limit + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + if any one of the acknowledged bits are on, set the GenAlarmAcked bit + + + VLVM.BL_SP: Raw Low Limit for Broken Loop + + + Clear operator control bits + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + Used to reset all alarms in the PLC + + + Broken Loop Fault. + + + VLVM.PO_SP: Position Setpoint in % open + + + Scale the output from % open to raw current counts. +Fail Closed valves are 4,000 raw output for 0% open and 20,000 raw output for 100% open. +Fail Open valves are 20,000 raw output for 0% open and 4,000 raw output for 100% open. + + + Call the Alarm AOI for the Motor Failure + + + if any one of the Faults are on, set the GenFault bit + + + PO_FB: Position Feedback in % open + + + Enable Broken Loop Alarm + + + VLVM.AutoPO_SP: Auto Position Setpoint in % open + + + HMI to Show Valve Opened Status. + + + VLVM.PO_SP: Position Setpoint in % open + + + Call the Alarm AOI for the IO PLC Fault + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + Set to 1 if there is an auto routine. Used to hide or show Auto Display on HMI + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.PO_FB: Position Feedback in % open + + + HMI to Show Valve Close Command. + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Device is ready for auto control if it is in remote, in auto, not in alarm, and not tagged out of service. + + + If tagged out of service or interlocked: +Move to the failed position (0% open for fail closed valves or 100% open for fail open valves) + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.PO_DB: Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + VLVM.PO_DB: Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + HMI to Show Valve Closed Status. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + VLVM.ManPO_SP: Auto Position Setpoint in % open + + + Suppress All Alarms. + + + Set to 1 if there is an remote status. Used to hide or show Remote Display on HMI + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + If the Valve Position Setpoint equals 0, fire the command to close the valve. + + + Find the shortest alarm time remaining: +Start by setting alarm time remaining very high. +Then for each alarm, if its fault is active and its time remaining is less than the current value of alarm time remaining, then set its time remaining as the overall alarm time remaining. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + if any one of the Annunciate bits are on, set the GenAnnunciate bit + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. +##### V.1.4 Also latch the reset if swiched out of Remote and Remote is enabled. ##### + + + ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + HMI to Show Valve Open Command. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + if any one of the Alarms are on, set the GenAlarm bit + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + If the position feedback indicates the valve is within the deadband of being opened or closed, then indicate that in the HMI. + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + If in auto, move auto position setpoint to manual position setpoint to support bumpless transfer from auto to manual. + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + VLVM.PO_SP: Position Setpoint in % open + + + Alarm Reset Command from HMI + + + VLVM.PO_SP: Position Setpoint in % open + + + Test for a Broken loop fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + VLVM.PO_FB: Position Feedback in % open + + + VLVM.UR_SP: Under Range Raw Alarm Limit + + + Scale the input to % open. +Fail Closed valves are 0% open at 4,000 raw input and 100% at 20,000 raw input. +Fail Open valves are 100% open at 4,000 raw input and 0% at 20,000 raw input. + + + Broken Loop Alarm. + + + Map items from DDT + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + VLVM.PO_SP: Position Setpoint in % open. + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + If Manual is disabled, force into AUTO mode. + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + If in remote and there is feedback: +Determine if the valve needs to be opening or closing based on the position error and the size of the deadband. +These outputs are used on the HMI to show needed valve movement. + + + VLVM.ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + If in local, set the manual setpoint based on the feedback to support bumpless transition to remote in manual. + + + ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Alarm Reset Command from HMI + + + If Auto is disabled, force into manual mode. + + + Map items to DDT + + + Acknowledge: HMI Input to reset the AlarmAckd bit. + + + VLVM.PO_SP: Position Setpoint in % open + + + If Remote is disabled, force into Remote mode. + + + VLVM.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Call the Alarm AOI for the Position Fault (Open and Close Commands are based on position error greater than the deadband) + + + Test for a Over Range fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + VLVM.ZI: Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + VLVM.ManPO_SP: Manual Position Setpoint in % open + + + If in auto, set the setpoint based on the auto setpoint. +If in manual, set the setpoint based on the manual setpoint. + + + Move Alarm Notify # to 0 if no Alarms are active. + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + VLVM.PositionError: In % Open + is Open Past Setpoint + + + VLVM.PO_FB: Position Feedback in % open + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + ZC: Valve Position Command 4,000-20,000 (4,00 when closed for fail closed or open for fail open) + + + Test for a Under Range fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + + + + + + DDT for VLVM Ladder DFB: Variable Speed Motor, No Strings + + + + First Integer of packed Bits + + + 1 = remote/local input wired 0 = not wired + + + + Set to 1 if there is an auto routine. Used to hide or show Auto display on HMI + + + + 1 = Open and Close Feedback is Present 0 = No Feedback + + + + PLC First Scan + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + Valve Failure + + + + Set to 1 if manual control should only be done through a PID Block (never the faceplate for this valve) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Used to reset all alarms in the PLC + + + + Locked by program (ESD) + + + + Fail Closed: 1 for Fail Closed Valves, 0 for Fail Open Valves + + + + Enable Broken Loop Alarm + + + + Enable Over Range Alarm + + + + Position Failure Alarm Enable + + + + Enable Under Range Alarm + + + + Second Integer of packed Bits + + + Tagged Out of Service + + + + Suppress All Alarms + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm is latched and all latched alarms are resetable + + + + HMI to Show Valve Close Command + + + + HMI to Show Valve Open Command + + + + HMI to Show Valve Opened Status + + + + HMI to Show Valve Closed Status + + + + Broken Loop Alarm + + + + Position Failure Alarm (position error exceeded deadband for required delay) + + + + Current Position Error Exceeds Deadband + + + + Under Range Alarm + + + + Over Range Alarm + + + + One of the alarm conditions is currently set (may not be in alarm yet) + + + + Third Integer of packed bits + + + Device is ready for auto control + + + + Acknowledge: HMI input to reset the AlarmAckd bit. + + + + Alarm Reset Command from HMI + + + + Set by HMI 0 = Device in Manual 1 = Device in Auto + + + + Under Range Fault + + + + Broken Loop Fault + + + + Over Range Fault + + + + True indicates blue flag should be displayed. + + + + Shelve Command from HMI + + + + Shelved Status + + + + Suppress Command from HMI + + + + Suppressed Status + + + + Valve Failure Alarm + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed bits (SPARE) + + + 1 = Interlock Enabled, 0 = Interlock Disabled + + + + 1 = Valve Failure Enabled, 0 = Valve Failure Disabled + + + + Spare Integer + + + Spare Integer + + + Valve Position Feedback 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Raw Low Limit for Broken Loop + + + Over Range Raw Alarm Limit + + + Position Deadband in % open. Used to trip alarm for feedback vs. command position. + + + Under Range Raw Alarm Limit + + + Auto Position Setpoint in % Open + + + Manual Position Setpoint in % Open + + + Position Setpoint in % open. + + + Valve Position Command 4,000-20,000 (4,000 when closed for fail closed or open for fail open) + + + Broken Loop Alarm DDT + + + Under Range Alarm DDT + + + Over Range Alarm DDT + + + Valve Position Failure DDT + + + PLC IO Fault Alarm DDT + + + Valve Failure Alarm DDT + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Position Feedback in % open + + + In % Open + is Open Past Setpoint + + + Combined Alarm Value Notification for HMI + + + + + Which filter is in a range of steps + + + + + + + + + + + + + + + + + + + + + + + + Index to iterate through filters of a basin + + + Index to itereate through basins + + + + (* Interate through the basin data structure and count up how many filters are with the Min and Max Step Numbers *) +FilterNumber := 0; +BasinNumber := 0; +for Basin := 1 to 2 Do + for Filter := 1 to 6 Do + if GE (HighStepNumber,BasinToMaster[Basin].BWFilterData[Filter].StepNo, LowStepNumber) then + BasinNumber := Basin; + FilterNumber := Filter; + end_if; + end_for; +end_for; + + + + + Enhanced Device DDT for embedded M580 DTM (with standalone PLC) + + + + + + + + + CRA health (Drop 1 to 31) + + + + + + Reserved + + + + + + Health bits for CRA Safe Task objects + + + + + + Health for DIO (New field name) + + + + + + CIMR/CIDR Object health bits + + + + + + Ethernet status + + + + + Link up/down for Ethernet port 1 + + + + + + Link up/down for Ethernet port 2 + + + + + + Link up/down for Ethernet port 3 + + + + + + Link up/down for Ethernet backplane port + + + + + + Link up/down for HSBY port + + + + + + + Redundancy status / backup path available + + + + + + Scanner OK and scanning at least 1 equipment (if at least 1 equipment configured) + + + + + + 0: one or more services not operating normally / 1: all operational + + + + + + 1: No traffic overload detected / 0: Traffic overload detected (ex: broadcast storm). Check your network topology and configuration. + + + + + + One bit for each user-observable feature + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + Main IP address status (0 in case of duplicate IP or no IP assigned) + + + + + + Ethernet backplane hardware status (0: failure, 1: OK) + + + + + + Ethernet backplane error (0: error, 1: OK) + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + EIP adapter (server) service 0: service not operating normally / 1: service operating normally or disabled + + + + + + One bit for each user-observable feature + + + + + IP address A/B status (0 in case of duplicate IP or no IP assigned) + + + + + + LLDP service status + + + + + + 0: event log service not operating normally / 1: event log service operating normally or disabled + + + + + + 1: No acknowledgement received from the syslog server / 0: otherwise + + + + + + Ethernet port 1 and 2 status + + + + + Ethernet port 3 and backplane port status + + + + + % of FDR server usage + + + + + Reserved + + + + + + Reserved + + + + + + Number of packets received on interface + + + + + Number of inbound packets that contain errors + + + + + Number of packets sent on interface + + + + + Number of outbound packets that contain errors + + + + + Signature of all files on local module FDR Server + + + + + DROP health bits (Drop 1 to 31) + + + + + Reserved + + + + + + RIO health bits (1 bit per RIO up to 128) + + + + + Local Slave health bits (Local Slave 1 to 3) + + + + + DIO health bits (1 bit per DIO up to 128 DIOs) + + + + + DIO device health (1 bit per DIO up to 128 DIO) + + + + + + DROP control bits (Drop 1 to 31) + + + Reserved + + + + RIO control bits (1 bit per RIO up to 128) + + + DIO control bits (1 bit per DIO up to 128 DIOs) + + + + + Device DDT For BME NOC Factory Cast + + + + + + + + + Ethernet status + + + + + Link up/down for Ethernet port 1 + + + + + + Link up/down for Ethernet port 2 + + + + + + Link up/down for Ethernet port 3 + + + + + + Link up/down for Ethernet backplane port + + + + + + Link up/down for HSBY port + + + + + + + Redundancy status / backup path available + + + + + + + Scanner OK and scanning at least 1 equipment (if at least 1 equipment configured) + + + + + + 0: one or more services not operating normally / 1: all operational + + + + + + 1: No traffic overload detected / 0: Traffic overload detected (ex: broadcast storm). Check your network topology and configuration. + + + + + + One bit for each user-observable feature + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + Main IP address status (0 in case of duplicate IP or no IP assigned) + + + + + + Ethernet backplane hardware status (0: failure, 1: OK) + + + + + + + Ethernet backplane error (0: error, 1: OK) + + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + EIP adapter (server) service 0: service not operating normally / 1: service operating normally or disabled + + + + + + One bit for each user-observable feature + + + + + IP address A/B status (0 in case of duplicate IP or no IP assigned) + + + + + + + LLDP service status + + + + + + 0: event log service not operating normally / 1: event log service operating normally or disabled + + + + + + 1: No acknowledgement received from the syslog server / 0: otherwise + + + + + + Ethernet port 1 and 2 status + + + + + Ethernet port 3 and backplane port status + + + + + MSB=Major Revision, LSB=Minor Revision + + + + + % of FDR server usage + + + + + Hidden - Reserved + + + + + + Number of packets received on interface + + + + + Number of inbound packets that contain errors + + + + + Number of packets sent on interface + + + + + Number of outbound packets that contain errors + + + + + Signature of all files on local module FDR Server + + + + + Health for DIO Objects + + + + + + Local Slave health bits (Local Slave 1 to 16) + + + + + DIO health bits (1 bit per DIO up to 128 DIOs. 112 - 127 are reserved for future extension) + + + + + DIO device health (1 bit per DIO up to 128 DIO) + + + + + + DIO control bits (1 bit per DIO up to 128 DIOs. 112 - 127 are reserved for future extension) + + + Reserved + + + + + + + + Health of Distributed IO Objects + + + + + + Device Connection health bits 2 to 17 + + + + + Device Connection health bits 18 to 33 + + + + + Device Connection health bits 34 to 49 + + + + + Device Connection health bits 50 to 65 + + + + + Device Connection health bits 66 to 81 + + + + + Device Connection health bits 82 to 97 + + + + + Device Connection health bits 98 to 113 + + + + + Device Connection health bits 114 to 129 + + + + + Device Connection health bits 130 to 145 + + + + + Device Connection health bits 146 to 161 + + + + + Device Connection health bits 162 to 511 + + + + + Device Connection health bits 178 to 193 + + + + + Device Connection health bits 194 to 209 + + + + + Device Connection health bits 210 to 225 + + + + + Device Connection health bits 226 to 241 + + + + + Device Connection health bits 242 to 257 + + + + + + diff --git a/formats/controlexpert/test/hsps.xsy b/formats/controlexpert/test/hsps.xsy new file mode 100644 index 0000000..8171025 --- /dev/null +++ b/formats/controlexpert/test/hsps.xsy @@ -0,0 +1,74984 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + + + + + + + + + + + + + + + + First Scan Bit + + + + System Time + + + + HSPS AFD 1 Speed + + + HSPS Motor 1 Vibration X-Axis + + + HSPS Motor 1 Vibration Y-Axis + + + HSPS Pump 1 Discharge Pressure + + + HSPS Pump 1 Vibration Y-Axis + + + HSPS Pump 1 Vibration Z-Axis + + + HSPS Pump 1 Vibration X-Axis + + + HSPS AFD 2 Speed + + + HSPS Motor 2 Vibration X-Axis + + + HSPS Motor 2 Vibration Y-Axis + + + HSPS Pump 2 Discharge Pressure + + + HSPS Pump 2 Vibration Y-Axis + + + HSPS Pump 2 Vibration Z-Axis + + + HSPS Pump 2 Vibration X-Axis + + + HSPS AFD 3 Speed + + + HSPS Motor 3 Vibration X-Axis + + + HSPS Motor 3 Vibration Y-Axis + + + HSPS Pump 3 Discharge Pressure + + + HSPS Pump 3 Vibration Y-Axis + + + HSPS Discharge Flow + + + HSPS Pump 1 + + + PLC Cold Start + + + PLC Warm Start + + + CPU Error + + + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + + + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + PLC Time - Day + + + PLC Time - Hour + + + PLC Time - Min + + + PLC Time - Month + + + PLC Time - Second + + + PLC Time - Year + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + HSPS AFD 1 In Bypass Mode + + + HSPS AFD 1 MPR Alarm + + + HSPS AFD 1 MPR Trip + + + HSPS AFD 1 MPR High Rtd Temperature + + + HSPS AFD 1 Trip + + + HSPS Pump 1 Suction Pressure Loss + + + HSPS AFD 1 Local Pump E-stop + + + HSPS AFD 1 Drive E-stop + + + HSPS AFD 1 Unplanned Stop + + + HSPS AFD 1 Stopped Status + + + Spare + + + Spare + + + HSPS AFD 2 MPR Alarm + + + HSPS AFD 2 MPR Trip + + + HSPS AFD 2 MPR High Rtd Temperature + + + HSPS AFD 2 Trip + + + HSPS Pump 2 Suction Pressure Loss + + + HSPS AFD 2 Local Pump E-stop + + + HSPS AFD 2 Drive E-stop + + + HSPS AFD 2 Unplanned Stop + + + HSPS AFD 2 Stopped Status + + + Spare + + + Spare + + + HSPS AFD 1 SCADA Lockout + + + HSPS AFD 1 SCADA Start + + + HSPS AFD 1 SCADA Stop + + + HSPS AFD 3 SCADA Lockout + + + HSPS AFD 3 SCADA Start + + + HSPS AFD 3 SCADA Stop + + + HSPS AFD 5 SCADA Lockout + + + HSPS AFD 5 SCADA Start + + + HSPS AFD 5 SCADA Stop + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 1 Speed + + + HSPS Motor 1 Vibration X-Axis + + + HSPS Motor 1 Vibration Y-Axis + + + HSPS Pump 1 Discharge Pressure + + + HSPS Pump 1 Vibration X-Axis + + + HSPS Pump 1 Vibration Y-Axis + + + HSPS Pump 1 Vibration Z-Axis + + + Spare + + + HSPS AFD 2 Speed + + + HSPS Motor 2 Vibration X-Axis + + + HSPS Motor 2 Vibration Y-Axis + + + HSPS Pump 2 Discharge Pressure + + + HSPS Pump 2 Vibration X-Axis + + + HSPS Pump 2 Vibration Y-Axis + + + HSPS Pump 2 Vibration Z-Axis + + + Spare + + + HSPS AFD 1 Speed Controller + + + HSPS AFD 4 Speed Controller + + + Spare + + + Spare + + + HSPS AFD 3 MPR Alarm + + + HSPS AFD 3 MPR Trip + + + HSPS AFD 3 MPR High Rtd Temperature + + + HSPS AFD 3 Trip + + + HSPS Pump 3 Suction Pressure Loss + + + HSPS AFD 3 Local Pump E-stop + + + HSPS AFD 3 Drive E-stop + + + HSPS AFD 3 Unplanned Stop + + + HSPS AFD 3 Stopped Status + + + Spare + + + Spare + + + HSPS AFD 4 MPR Alarm + + + HSPS AFD 4 MPR Trip + + + HSPS AFD 4 MPR High Rtd Temperature + + + HSPS AFD 4 Trip + + + HSPS Pump 4 Suction Pressure Loss + + + HSPS AFD 4 Local Pump E-stop + + + HSPS AFD 4 Drive E-stop + + + HSPS AFD 4 Unplanned Stop + + + HSPS AFD 4 Stopped Status + + + Spare + + + Spare + + + HSPS AFD 5 MPR Alarm + + + HSPS AFD 5 MPR Trip + + + HSPS AFD 5 MPR High Rtd Temperature + + + HSPS AFD 5 Trip + + + HSPS Pump 5 Suction Pressure Loss + + + HSPS AFD 5 Local Pump E-stop + + + HSPS AFD 5 Drive E-stop + + + HSPS AFD 5 Unplanned Stop + + + HSPS AFD 5 Stopped Status + + + Spare + + + Spare + + + HSPS AFD 6 MPR Alarm + + + HSPS AFD 6 MPR Trip + + + HSPS AFD 6 MPR High Rtd Temperature + + + HSPS AFD 6 Trip + + + HSPS Pump 6 Suction Pressure Loss + + + HSPS AFD 6 Local Pump E-stop + + + HSPS AFD 6 Drive E-stop + + + HSPS AFD 6 Unplanned Stop + + + HSPS AFD 6 Stopped Status + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 2 SCADA Lockout + + + HSPS AFD 2 SCADA Start + + + HSPS AFD 2 SCADA Stop + + + HSPS AFD 4 SCADA Lockout + + + HSPS AFD 4 SCADA Start + + + HSPS AFD 4 SCADA Stop + + + HSPS AFD 6 SCADA Lockout + + + HSPS AFD 6 SCADA Start + + + HSPS AFD 6 SCADA Stop + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Clearwell Low Level Lockout to ALL AFDs + + + HSPS AFD 3 Speed + + + HSPS Motor 3 Vibration X-Axis + + + HSPS Motor 3 Vibration Y-Axis + + + HSPS Pump 3 Discharge Pressure + + + HSPS Pump 3 Vibration X-Axis + + + HSPS Pump 3 Vibration Y-Axis + + + HSPS Pump 3 Vibration Z-Axis + + + Spare + + + HSPS AFD 4 Speed + + + HSPS Motor 4 Vibration X-Axis + + + HSPS Motor 4 Vibration Y-Axis + + + HSPS Pump 4 Discharge Pressure + + + HSPS Pump 4 Vibration X-Axis + + + HSPS Pump 4 Vibration Y-Axis + + + HSPS Pump 4 Vibration Z-Axis + + + Spare + + + HSPS AFD 2 Speed Controller + + + HSPS AFD 5 Speed Controller + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS Pump 1 Control Valve Maintenance Mode + + + HSPS Pump 1 Control Valve Failure + + + HSPS North Sump Pump 1A Fault + + + HSPS North Sump Pump 1B Fault + + + HSPS North Sump Pump Control Power Failure + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS Pump 2 Control Valve Maintenance Mode + + + HSPS Pump 2 Control Valve Failure + + + HSPS South Sump Pump 2A Fault + + + HSPS South Sump Pump 2B Fault + + + HSPS South Sump Pump Control Power Failure + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS Pump 3 Control Valve Maintenance Mode + + + HSPS Pump 3 Control Valve Failure + + + HSPS 4160V Switchgear 1 Lock Out Relay Trip + + + HSPS 4160V Switchgear 1 Generator Breaker Open Status + + + HSPS 4160V Switchgear 1 Generator Breaker Closed Status + + + HSPS Primary Substation Transformer 1 Low Oil Level + + + HSPS Primary Substation Transformer 1 Oil High Temperature + + + HSPS Primary Substation Transformer 1 Pressure Relief Device Activation + + + HSPS Primary Substation Transformer 1 Winding High Temperature + + + HSPS Swgr-8112-3 SPD Maintenance Alarm + + + HSPS AFD 5 Speed + + + HSPS Motor 5 Vibration X-Axis + + + HSPS Motor 5 Vibration Y-Axis + + + HSPS Pump 5 Discharge Pressure + + + HSPS Pump 5 Vibration X-Axis + + + HSPS Pump 5 Vibration Y-Axis + + + HSPS Pump 5 Vibration Z-Axis + + + Spare + + + HSPS AFD 6 Speed + + + HSPS Motor 6 Vibration X-Axis + + + HSPS Motor 6 Vibration Y-Axis + + + HSPS Pump 6 Discharge Pressure + + + HSPS Pump 6 Vibration X-Axis + + + HSPS Pump 6 Vibration Y-Axis + + + HSPS Pump 6 Vibration Z-Axis + + + Spare + + + HSPS AFD 3 Speed Controller + + + HSPS AFD 6 Speed Controller + + + Spare + + + Spare + + + HSPS Pump 4 Control Valve Maintenance Mode + + + HSPS Pump 4 Control Valve Failure + + + HSPS 4160V Switchgear 2 Lock Out Relay Trip + + + HSPS Primary Substation Transformer 2 Low Oil Level + + + HSPS Primary Substation Transformer 2 Oil High Temperature + + + HSPS Primary Substation Transformer 2 Pressure Relief Device Activation + + + HSPS Primary Substation Transformer 2 Winding High Temperature + + + HSPS Swgr-8112-4 SPD Maintenance Alarm + + + HSPS Pump 5 Control Valve Maintenance Mode + + + HSPS Pump 5 Control Valve Failure + + + HSPS 480V Switchgear 3 Lock Out Relay Trip + + + HSPS Suction Pressure Relay Panel Low Pressure Lockout + + + HSPS Substation Transformer 3 Low Oil Level + + + HSPS Substation Transformer 3 Oil High Temperature + + + HSPS Substation Transformer 3 Pressure Relief Device Activation + + + HSPS Substation Transformer 3 Winding High Temperature + + + HSPS SWB-8112-3 SPD Maintenance Alarm + + + HSPS 480V Switchgear 4 Lock Out Relay Trip + + + HSPS Pump Room High Water Level Relay Panel High Level Alarm + + + HSPS Substation Transformer 4 Low Oil Level + + + HSPS Substation Transformer 4 Oil High Temperature + + + HSPS Substation Transformer 4 Pressure Relief Device Activation + + + HSPS Substation Transformer 4 Winding High Temperature + + + HSPS SWB-8112-4 SPD Maintenance Alarm + + + HSPS FMV Electrical Room Building Intrusion Alarm + + + HSPS Meter Vault High Level Alarm + + + HSPS Flow Meter Hatch Open + + + Spare + + + HSPS 480V Switchgear Transfer Failure + + + HSPS 480V Switchgear Common Alarm + + + HSPS Discharge Flow Pulse (1000 Gal) + + + HSPS LP-8112-1 SPD Maintenance Alarm + + + HSPS Net Cabinet Door Open + + + HSPS Net Cabinet Dc Power Ok + + + HSPS SCADA UPS Cabinet Door Open + + + HSPS SCADA UPS Cabinet UPS Alarm + + + Spare + + + HSPS Security UPS Cabinet Door Open + + + HSPS Security UPS Cabinet UPS Alarm + + + Spare + + + HSPS Elevator Controller Common Alarm + + + HSPS Elvator Pit Relay Panel Common Alarm + + + HSPS Electrical Building Intrusion + + + HSPS Pump Room Staircase Intrusion + + + Spare + + + HSPS LP-8112-2 SPD Maintenance Alarm + + + HSPS Discharge Line Total Ammonia Indication + + + HSPS Discharge Line Free Ammonia + + + HSPS Discharge Line Monochloramine + + + HSPS Discharge Line Ph + + + HSPS Discharge Line Total Chlorine + + + HSPS Flow Meter Vault Electrical Room Temperature + + + Spare + + + Spare + + + HSPS Discharge Flow + + + HSPS Low Suction Pressure + + + HSPS Discharge Pressure + + + HSPS SCADA Room Temperature + + + HSPS Electrical Room Ambient Temperature + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 1 Bypass Mode Enabled Channel Fault + + + HSPS AFD 1 In Bypass Mode Channel Fault + + + HSPS AFD 1 MPR Alarm Channel Fault + + + HSPS AFD 1 MPR Trip Channel Fault + + + HSPS AFD 1 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 1 Trip Channel Fault + + + HSPS Pump 1 Suction Pressure Loss Channel Fault + + + HSPS AFD 1 SCADA Enabled Channel Fault + + + HSPS Pump 1 Ready Channel Fault + + + HSPS AFD 1 Run Status Channel Fault + + + HSPS AFD 1 Local Pump E-stop Channel Fault + + + HSPS AFD 1 Drive E-stop Channel Fault + + + HSPS AFD 1 Unplanned Stop Channel Fault + + + HSPS AFD 2 Bypass Mode Enabled Channel Fault + + + HSPS AFD 2 In Bypass Mode Channel Fault + + + HSPS AFD 2 MPR Alarm Channel Fault + + + HSPS AFD 2 MPR Trip Channel Fault + + + HSPS AFD 2 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 2 Trip Channel Fault + + + HSPS Pump 2 Suction Pressure Loss Channel Fault + + + HSPS AFD 2 SCADA Enabled Channel Fault + + + HSPS Pump 2 Ready Channel Fault + + + HSPS AFD 2 Run Status Channel Fault + + + HSPS AFD 2 Local Pump E-stop Channel Fault + + + HSPS AFD 2 Drive E-stop Channel Fault + + + HSPS AFD 2 Unplanned Stop Channel Fault + + + HSPS AFD 1 SCADA Lockout Channel Fault + + + HSPS AFD 1 SCADA Start Channel Fault + + + HSPS AFD 1 SCADA Stop Channel Fault + + + HSPS AFD 3 SCADA Lockout Channel Fault + + + HSPS AFD 3 SCADA Start Channel Fault + + + HSPS AFD 3 SCADA Stop Channel Fault + + + HSPS AFD 5 SCADA Lockout Channel Fault + + + HSPS AFD 5 SCADA Start Channel Fault + + + HSPS AFD 5 SCADA Stop Channel Fault + + + HSPS AFD 1 Speed Channel Fault + + + HSPS Motor 1 Vibration X-Axis Channel Fault + + + HSPS Motor 1 Vibration Y-Axis Channel Fault + + + HSPS Pump 1 Discharge Pressure Channel Fault + + + HSPS Pump 1 Vibration X-Axis Channel Fault + + + HSPS Pump 1 Vibration Y-Axis Channel Fault + + + HSPS Pump 1 Vibration Z-Axis Channel Fault + + + HSPS AFD 2 Speed Channel Fault + + + HSPS Motor 2 Vibration X-Axis Channel Fault + + + HSPS Motor 2 Vibration Y-Axis Channel Fault + + + HSPS Pump 2 Discharge Pressure Channel Fault + + + HSPS Pump 2 Vibration X-Axis Channel Fault + + + HSPS Pump 2 Vibration Y-Axis Channel Fault + + + HSPS Pump 2 Vibration Z-Axis Channel Fault + + + HSPS AFD 1 Speed Controller Channel Fault + + + HSPS AFD 4 Speed Controller Channel Fault + + + HSPS AFD 3 Bypass Mode Enabled Channel Fault + + + HSPS AFD 3 In Bypass Mode Channel Fault + + + HSPS AFD 3 MPR Alarm Channel Fault + + + HSPS AFD 3 MPR Trip Channel Fault + + + HSPS AFD 3 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 3 Trip Channel Fault + + + HSPS Pump 3 Suction Pressure Loss Channel Fault + + + HSPS AFD 3 SCADA Enabled Channel Fault + + + HSPS Pump 3 Ready Channel Fault + + + HSPS AFD 3 Run Status Channel Fault + + + HSPS AFD 3 Local Pump E-stop Channel Fault + + + HSPS AFD 3 Drive E-stop Channel Fault + + + HSPS AFD 3 Unplanned Stop Channel Fault + + + HSPS AFD 4 Bypass Mode Enabled Channel Fault + + + HSPS AFD 4 In Bypass Mode Channel Fault + + + HSPS AFD 4 MPR Alarm Channel Fault + + + HSPS AFD 4 MPR Trip Channel Fault + + + HSPS AFD 4 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 4 Trip Channel Fault + + + HSPS Pump 4 Suction Pressure Loss Channel Fault + + + HSPS AFD 4 SCADA Enabled Channel Fault + + + HSPS Pump 4 Ready Channel Fault + + + HSPS AFD 4 Run Status Channel Fault + + + HSPS AFD 4 Local Pump E-stop Channel Fault + + + HSPS AFD 4 Drive E-stop Channel Fault + + + HSPS AFD 4 Unplanned Stop Channel Fault + + + HSPS AFD 5 Bypass Mode Enabled Channel Fault + + + HSPS AFD 5 In Bypass Mode Channel Fault + + + HSPS AFD 5 MPR Alarm Channel Fault + + + HSPS AFD 5 MPR Trip Channel Fault + + + HSPS AFD 5 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 5 Trip Channel Fault + + + HSPS Pump 5 Suction Pressure Loss Channel Fault + + + HSPS AFD 5 SCADA Enabled Channel Fault + + + HSPS Pump 5 Ready Channel Fault + + + HSPS AFD 5 Run Status Channel Fault + + + HSPS AFD 5 Local Pump E-stop Channel Fault + + + HSPS AFD 5 Drive E-stop Channel Fault + + + HSPS AFD 5 Unplanned Stop Channel Fault + + + HSPS AFD 6 Bypass Mode Enabled Channel Fault + + + HSPS AFD 6 In Bypass Mode Channel Fault + + + HSPS AFD 6 MPR Alarm Channel Fault + + + HSPS AFD 6 MPR Trip Channel Fault + + + HSPS AFD 6 MPR High Rtd Temperature Channel Fault + + + HSPS AFD 6 Trip Channel Fault + + + HSPS Pump 6 Suction Pressure Loss Channel Fault + + + HSPS AFD 6 SCADA Enabled Channel Fault + + + HSPS Pump 6 Ready Channel Fault + + + HSPS AFD 6 Run Status Channel Fault + + + HSPS AFD 6 Local Pump E-stop Channel Fault + + + HSPS AFD 6 Drive E-stop Channel Fault + + + HSPS AFD 6 Unplanned Stop Channel Fault + + + HSPS AFD 2 SCADA Lockout Channel Fault + + + HSPS AFD 2 SCADA Start Channel Fault + + + HSPS AFD 2 SCADA Stop Channel Fault + + + HSPS AFD 4 SCADA Lockout Channel Fault + + + HSPS AFD 4 SCADA Start Channel Fault + + + HSPS AFD 4 SCADA Stop Channel Fault + + + HSPS AFD 6 SCADA Lockout Channel Fault + + + HSPS AFD 6 SCADA Start Channel Fault + + + HSPS AFD 6 SCADA Stop Channel Fault + + + HSPS AFD 3 Speed Channel Fault + + + HSPS Motor 3 Vibration X-Axis Channel Fault + + + HSPS Motor 3 Vibration Y-Axis Channel Fault + + + HSPS Pump 3 Discharge Pressure Channel Fault + + + HSPS Pump 3 Vibration X-Axis Channel Fault + + + HSPS Pump 3 Vibration Y-Axis Channel Fault + + + HSPS Pump 3 Vibration Z-Axis Channel Fault + + + HSPS AFD 4 Speed Channel Fault + + + HSPS Motor 4 Vibration X-Axis Channel Fault + + + HSPS Motor 4 Vibration Y-Axis Channel Fault + + + HSPS Pump 4 Discharge Pressure Channel Fault + + + HSPS Pump 4 Vibration X-Axis Channel Fault + + + HSPS Pump 4 Vibration Y-Axis Channel Fault + + + HSPS Pump 4 Vibration Z-Axis Channel Fault + + + HSPS AFD 2 Speed Controller Channel Fault + + + HSPS AFD 5 Speed Controller Channel Fault + + + HSPS Pump 1 Control Valve Open Status Channel Fault + + + HSPS Pump 1 Control Valve Closed Status Channel Fault + + + HSPS Pump 1 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 1 Control Valve Failure Channel Fault + + + HSPS North Sump Pump 1A Auto Enabled Channel Fault + + + HSPS North Sump Pump 1A Run Status Channel Fault + + + HSPS North Sump Pump 1A Fault Channel Fault + + + HSPS North Sump Pump 1B Auto Enabled Channel Fault + + + HSPS North Sump Pump 1B Run Status Channel Fault + + + HSPS North Sump Pump 1B Fault Channel Fault + + + HSPS North Sump Pump Control Power Failure Channel Fault + + + HSPS Pump 2 Control Valve Open Status Channel Fault + + + HSPS Pump 2 Control Valve Closed Status Channel Fault + + + HSPS Pump 2 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 2 Control Valve Failure Channel Fault + + + HSPS South Sump Pump 2A Auto Enabled Channel Fault + + + HSPS South Sump Pump 2A Run Status Channel Fault + + + HSPS South Sump Pump 2A Fault Channel Fault + + + HSPS South Sump Pump 2B Auto Enabled Channel Fault + + + HSPS South Sump Pump 2B Run Status Channel Fault + + + HSPS South Sump Pump 2B Fault Channel Fault + + + HSPS South Sump Pump Control Power Failure Channel Fault + + + HSPS Pump 3 Control Valve Open Status Channel Fault + + + HSPS Pump 3 Control Valve Closed Status Channel Fault + + + HSPS Pump 3 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 3 Control Valve Failure Channel Fault + + + HSPS 4160V Switchgear 1 Main Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 1 Main Breaker Closed Status Channel Fault + + + HSPS 4160V Switchgear 1 Tie Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 1 Tie Breaker Closed Status Channel Fault + + + HSPS 4160V Switchgear 1 Lock Out Relay Trip Channel Fault + + + HSPS 4160V Switchgear 1 Generator Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 1 Generator Breaker Closed Status Channel Fault + + + HSPS Primary Substation Transformer 1 Low Oil Level Channel Fault + + + HSPS Primary Substation Transformer 1 Oil High Temperature Channel Fault + + + HSPS Primary Substation Transformer 1 Pressure Relief Device ActivationChannel Fault + + + HSPS Primary Substation Transformer 1 Winding High Temperature Channel Fault + + + HSPS Swgr-8112-3 SPD Maintenance Alarm Channel Fault + + + HSPS AFD 5 Speed Channel Fault + + + HSPS Motor 5 Vibration X-Axis Channel Fault + + + HSPS Motor 5 Vibration Y-Axis Channel Fault + + + HSPS Pump 5 Discharge Pressure Channel Fault + + + HSPS Pump 5 Vibration X-Axis Channel Fault + + + HSPS Pump 5 Vibration Y-Axis Channel Fault + + + HSPS Pump 5 Vibration Z-Axis Channel Fault + + + HSPS AFD 6 Speed Channel Fault + + + HSPS Motor 6 Vibration X-Axis Channel Fault + + + HSPS Motor 6 Vibration Y-Axis Channel Fault + + + HSPS Pump 6 Discharge Pressure Channel Fault + + + HSPS Pump 6 Vibration X-Axis Channel Fault + + + HSPS Pump 6 Vibration Y-Axis Channel Fault + + + HSPS Pump 6 Vibration Z-Axis Channel Fault + + + HSPS AFD 3 Speed Controller Channel Fault + + + HSPS AFD 6 Speed Controller Channel Fault + + + HSPS Pump 4 Control Valve Open Status Channel Fault + + + HSPS Pump 4 Control Valve Closed Status Channel Fault + + + HSPS Pump 4 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 4 Control Valve Failure Channel Fault + + + HSPS 4160V Switchgear 2 Main Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 2 Main Breaker Closed Status Channel Fault + + + HSPS 4160V Switchgear 2 Tie Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 2 Tie Breaker Closed Status Channel Fault + + + HSPS 4160V Switchgear 2 Lock Out Relay Trip Channel Fault + + + HSPS 4160V Switchgear 2 Generator Breaker Open Status Channel Fault + + + HSPS 4160V Switchgear 2 Generator Breaker Closed Status Channel Fault + + + HSPS Primary Substation Transformer 2 Low Oil Level Channel Fault + + + HSPS Primary Substation Transformer 2 Oil High Temperature Channel Fault + + + HSPS Primary Substation Transformer 2 Pressure Relief Device ActivationChannel Fault + + + HSPS Primary Substation Transformer 2 Winding High Temperature Channel Fault + + + HSPS Swgr-8112-4 SPD Maintenance Alarm Channel Fault + + + HSPS Pump 5 Control Valve Open Status Channel Fault + + + HSPS Pump 5 Control Valve Closed Status Channel Fault + + + HSPS Pump 5 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 5 Control Valve Failure Channel Fault + + + HSPS 480V Switchgear 3 Main Breaker Open Status Channel Fault + + + HSPS 480V Switchgear 3 Main Breaker Closed Status Channel Fault + + + HSPS 480V Switchgear 3 Tie Breaker Open Status Channel Fault + + + HSPS 480V Switchgear 3 Tie Breaker Closed Status Channel Fault + + + HSPS 480V Switchgear 3 Lock Out Relay Trip Channel Fault + + + HSPS Suction Pressure Relay Panel Suction Bypass Enabled Channel Fault + + + HSPS Suction Pressure Relay Panel Low Pressure Lockout Channel Fault + + + HSPS Substation Transformer 3 Low Oil Level Channel Fault + + + HSPS Substation Transformer 3 Oil High Temperature Channel Fault + + + HSPS Substation Transformer 3 Pressure Relief Device Activation Channel Fault + + + HSPS Substation Transformer 3 Winding High Temperature Channel Fault + + + HSPS SWB-8112-3 SPD Maintenance Alarm Channel Fault + + + HSPS Pump 6 Control Valve Open Status Channel Fault + + + HSPS Pump 6 Control Valve Closed Status Channel Fault + + + HSPS Pump 6 Control Valve Maintenance Mode Channel Fault + + + HSPS Pump 6 Control Valve Failure Channel Fault + + + HSPS 480V Switchgear 4 Main Breaker Open Status Channel Fault + + + HSPS 480V Switchgear 4 Main Breaker Closed Status Channel Fault + + + HSPS 480V Switchgear 4 Tie Breaker Open Status Channel Fault + + + HSPS 480V Switchgear 4 Tie Breaker Closed Status Channel Fault + + + HSPS 480V Switchgear 4 Lock Out Relay Trip Channel Fault + + + HSPS Pump Room High Water Level Relay Panel Bypass Enabled Channel Fault + + + HSPS Pump Room High Water Level Relay Panel High Level Alarm Channel Fault + + + HSPS Substation Transformer 4 Low Oil Level Channel Fault + + + HSPS Substation Transformer 4 Oil High Temperature Channel Fault + + + HSPS Substation Transformer 4 Pressure Relief Device Activation Channel Fault + + + HSPS Substation Transformer 4 Winding High Temperature Channel Fault + + + HSPS SWB-8112-4 SPD Maintenance Alarm Channel Fault + + + HSPS FMV Electrical Room Building Intrusion Alarm Channel Fault + + + HSPS Meter Vault High Level Alarm Channel Fault + + + HSPS Flow Meter Hatch Open Channel Fault + + + A + + + A + + + B + + + B + + + HSPS 480V Switchgear Transfer Failure Channel Fault + + + HSPS 480V Switchgear Common Alarm Channel Fault + + + T31 + + + T32 + + + HSPS Discharge Flow Pulse (1000 Gal) Channel Fault + + + HSPS Reclaim Valve Open Status Channel Fault + + + HSPS Reclaim Valve Closed Status Channel Fault + + + HSPS LP-8112-1 SPD Maintenance Alarm Channel Fault + + + HSPS Net Cabinet Door Open Channel Fault + + + HSPS Net Cabinet Dc Power Ok Channel Fault + + + HSPS SCADA UPS Cabinet Door Open Channel Fault + + + HSPS SCADA UPS Cabinet UPS Alarm Channel Fault + + + HSPS Security UPS Cabinet Door Open Channel Fault + + + HSPS Security UPS Cabinet UPS Alarm Channel Fault + + + HSPS Elevator Controller Common Alarm Channel Fault + + + HSPS Elvator Pit Relay Panel Common Alarm Channel Fault + + + HSPS Electrical Building Intrusion Channel Fault + + + HSPS Pump Room Staircase Intrusion Channel Fault + + + HSPS Discharge Valve Open Status Channel Fault + + + HSPS Discharge Valve Closed Status Channel Fault + + + HSPS LP-8112-2 SPD Maintenance Alarm Channel Fault + + + HSPS Discharge Line Total Ammonia Indication Channel Fault + + + HSPS Discharge Line Free Ammonia Channel Fault + + + HSPS Discharge Line Monochloramine Channel Fault + + + HSPS Discharge Line Ph Channel Fault + + + HSPS Discharge Line Total Chlorine Channel Fault + + + HSPS Flow Meter Vault Electrical Room Temperature Channel Fault + + + HSPS Discharge Flow Channel Fault + + + HSPS Low Suction Pressure Channel Fault + + + HSPS Discharge Pressure Channel Fault + + + HSPS SCADA Room Temperature Channel Fault + + + HSPS Electrical Room Ambient Temperature Channel Fault + + + HSPS AFD 1 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 3992 + + + -0.05 + + + -0.05 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 1 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4131 + + + 0.1114625 + + + 0.1114625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 1 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4157 + + + 0.1137375 + + + 0.1137375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 1 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4656 + + + 15.375 + + + 15.375 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 300.0 + + + 275.0 + + + 150.0 + + + 75.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 2 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4005 + + + 0.03125 + + + 0.03125 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 2 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4127 + + + 0.1111125 + + + 0.1111125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 2 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4110 + + + 0.109625 + + + 0.109625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 2 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4672 + + + 15.75 + + + 15.75 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 300.0 + + + 275.0 + + + 150.0 + + + 75.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 3 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4010 + + + 0.0625 + + + 0.0625 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 3 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4134 + + + 0.111725 + + + 0.111725 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 3 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4137 + + + 0.1119875 + + + 0.1119875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 3 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4664 + + + 15.5625 + + + 15.5625 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 300.0 + + + 275.0 + + + 150.0 + + + 75.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 4 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 15174 + + + 69.8375 + + + 69.8375 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 4 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4170 + + + 0.114875 + + + 0.114875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 4 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4076 + + + 0.10665 + + + 0.10665 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 4 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 6260 + + + 52.96875 + + + 52.96875 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 5 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 3974 + + + -0.1625 + + + -0.1625 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 5 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4183 + + + 0.1160125 + + + 0.1160125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 5 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4131 + + + 0.1114625 + + + 0.1114625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 5 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4659 + + + 15.44531 + + + 15.44531 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 300.0 + + + 275.0 + + + 150.0 + + + 75.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 6 Speed + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 15218 + + + 70.1125 + + + 70.1125 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 6 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4211 + + + 0.1184625 + + + 0.1184625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Motor 6 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4028 + + + 0.10245 + + + 0.10245 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 6 Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 6259 + + + 52.94531 + + + 52.94531 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 300.0 + + + 275.0 + + + 150.0 + + + 75.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Line Total Ammonia Indication + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 11400 + + + 0.925 + + + 0.925 + + + 0.0 + + + 2.0 + + + 4000.0 + + + 20000.0 + + + 0.9 + + + 0.7 + + + 0.27 + + + 0.1 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 250 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 250 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 250 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Line Free Ammonia + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 5035 + + + 0.129375 + + + 0.129375 + + + 0.0 + + + 2.0 + + + 4000.0 + + + 20000.0 + + + 0.9 + + + 0.7 + + + 0.27 + + + 0.1 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Line Monochloramine + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 10422 + + + 4.01375 + + + 4.01375 + + + 0.0 + + + 10.0 + + + 4000.0 + + + 20000.0 + + + 4.0 + + + 3.0 + + + 2.0 + + + 1.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Line Ph + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 12955 + + + 7.835625 + + + 7.835625 + + + 0.0 + + + 14.0 + + + 4000.0 + + + 20000.0 + + + 13.0 + + + 11.0 + + + 6.0 + + + 2.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Line Total Chlorine + + + 224 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 10457 + + + 4.035625 + + + 4.035625 + + + 0.0 + + + 10.0 + + + 4000.0 + + + 20000.0 + + + 9.0 + + + 6.0 + + + 4.0 + + + 2.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Flow Meter Vault Electrical Room Temperature + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 13179 + + + 75.95825 + + + 75.95825 + + + 14.0 + + + 122.0 + + + 4000.0 + + + 20000.0 + + + 120.0 + + + 90.0 + + + 70.0 + + + 40.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 50.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Low Suction Pressure + + + 248 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 14017 + + + 15.65156 + + + 15.65156 + + + 0.0 + + + 25.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 11.0 + + + 10.2 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 5.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 750 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 1 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 1 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 1 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 1 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 8 + + + 0 + + + 0 + + + 0 + + + 250 + + + 1 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Discharge Pressure + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5871 + + + 43.85156 + + + 43.85156 + + + 0.0 + + + 375.0 + + + 4000.0 + + + 20000.0 + + + 250.0 + + + 200.0 + + + 125.0 + + + 70.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 50.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS SCADA Room Temperature + + + 254 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 13308 + + + 76.82899 + + + 76.82899 + + + 14.0 + + + 122.0 + + + 4000.0 + + + 20000.0 + + + 120.0 + + + 90.0 + + + 50.0 + + + 20.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 15.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS AFD 1 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 1 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 2 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 2 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 3 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 3 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 4 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 4 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 5 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 5 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 MPR Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 MPR Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 MPR High Rtd Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 6 Suction Pressure Loss + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 Local Pump E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 Drive E-stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 6 Unplanned Stop + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 1 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS North Sump Pump 1A Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS North Sump Pump 1B Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS North Sump Pump Control Power Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 2 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS South Sump Pump 2A Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS South Sump Pump 2B Fault + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS South Sump Pump Control Power Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 3 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS 4160V Switchgear 1 Lock Out Relay Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Primary Substation Transformer 1 Low Oil Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 1 Oil High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 1 Pressure Relief Device Activation + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 1 Winding High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Swgr-8112-3 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 4 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS 4160V Switchgear 2 Lock Out Relay Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Primary Substation Transformer 2 Low Oil Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 2 Oil High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 2 Pressure Relief Device Activation + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Primary Substation Transformer 2 Winding High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Swgr-8112-4 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump 5 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS 480V Switchgear 3 Lock Out Relay Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Suction Pressure Relay Panel Low Pressure Lockout + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Substation Transformer 3 Low Oil Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 3 Oil High Temperature + + + -30195 + + + 16 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 91 + + + 0 + + + 4160 + + + 0 + + + 0 + + + 8496 + + + 750 + + + 0 + + + 5.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 8496 + + + + HSPS Substation Transformer 3 Pressure Relief Device Activation + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 3 Winding High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS SWB-8112-3 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS 480V Switchgear 4 Lock Out Relay Trip + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Pump Room High Water Level Relay Panel High Level Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 4 Low Oil Level + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 4 Oil High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 4 Pressure Relief Device Activation + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Substation Transformer 4 Winding High Temperature + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS SWB-8112-4 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS FMV Electrical Room Building Intrusion Alarm + + + -30200 + + + 16 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 91 + + + 0 + + + 4160 + + + 0 + + + 0 + + + 8456 + + + 1 + + + 0 + + + 5.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 8456 + + + + HSPS Meter Vault High Level Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Flow Meter Hatch Open + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS 480V Switchgear Transfer Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS 480V Switchgear Common Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Discharge Flow Pulse (1000 Gal) + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS LP-8112-1 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Net Cabinet Door Open + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Net Cabinet Dc Power Ok + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 514 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS SCADA UPS Cabinet Door Open + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS SCADA UPS Cabinet UPS Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Security UPS Cabinet Door Open + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Security UPS Cabinet UPS Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Elevator Controller Common Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Elvator Pit Relay Panel Common Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS Pump Room Staircase Intrusion + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS LP-8112-2 SPD Maintenance Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS AFD 1 Bypass Mode Enabled + + + HSPS AFD 1 SCADA Enabled + + + HSPS Pump 1 Ready + + + HSPS AFD 1 Run Status + + + HSPS AFD 2 Bypass Mode Enabled + + + HSPS AFD 2 In Bypass Mode + + + HSPS AFD 2 SCADA Enabled + + + HSPS Pump 2 Ready + + + HSPS AFD 2 Run Status + + + HSPS AFD 3 Bypass Mode Enabled + + + HSPS AFD 3 In Bypass Mode + + + HSPS AFD 3 SCADA Enabled + + + HSPS Pump 3 Ready + + + HSPS AFD 3 Run Status + + + HSPS AFD 4 Bypass Mode Enabled + + + HSPS AFD 4 In Bypass Mode + + + HSPS AFD 4 SCADA Enabled + + + HSPS Pump 4 Ready + + + HSPS AFD 4 Run Status + + + HSPS AFD 5 Bypass Mode Enabled + + + HSPS AFD 5 In Bypass Mode + + + HSPS AFD 5 SCADA Enabled + + + HSPS Pump 5 Ready + + + HSPS AFD 5 Run Status + + + HSPS AFD 6 Bypass Mode Enabled + + + HSPS AFD 6 In Bypass Mode + + + HSPS AFD 6 SCADA Enabled + + + HSPS Pump 6 Ready + + + HSPS AFD 6 Run Status + + + HSPS Pump 1 Control Valve Open Status + + + HSPS Pump 1 Control Valve Closed Status + + + HSPS North Sump Pump 1A Auto Enabled + + + HSPS North Sump Pump 1A Run Status + + + HSPS North Sump Pump 1B Auto Enabled + + + HSPS North Sump Pump 1B Run Status + + + HSPS Pump 2 Control Valve Open Status + + + HSPS Pump 2 Control Valve Closed Status + + + HSPS South Sump Pump 2A Auto Enabled + + + HSPS South Sump Pump 2A Run Status + + + HSPS South Sump Pump 2B Auto Enabled + + + HSPS South Sump Pump 2B Run Status + + + HSPS Pump 3 Control Valve Open Status + + + HSPS Pump 3 Control Valve Closed Status + + + HSPS 4160V Switchgear 1 Main Breaker Open Status + + + HSPS 4160V Switchgear 1 Main Breaker Closed Status + + + HSPS 4160V Switchgear 1 Tie Breaker Open Status + + + HSPS 4160V Switchgear 1 Tie Breaker Closed Status + + + HSPS Pump 4 Control Valve Open Status + + + HSPS Pump 4 Control Valve Closed Status + + + HSPS 4160V Switchgear 2 Main Breaker Open Status + + + HSPS 4160V Switchgear 2 Main Breaker Closed Status + + + HSPS 4160V Switchgear 2 Tie Breaker Open Status + + + HSPS 4160V Switchgear 2 Tie Breaker Closed Status + + + HSPS 4160V Switchgear 2 Generator Breaker Open Status + + + HSPS Pump 5 Control Valve Open Status + + + HSPS Pump 5 Control Valve Closed Status + + + HSPS 480V Switchgear 3 Main Breaker Open Status + + + HSPS 480V Switchgear 3 Main Breaker Closed Status + + + HSPS 480V Switchgear 3 Tie Breaker Open Status + + + HSPS 480V Switchgear 3 Tie Breaker Closed Status + + + HSPS Suction Pressure Relay Panel Suction Bypass Enabled + + + HSPS Pump 6 Control Valve Open Status + + + HSPS Pump 6 Control Valve Closed Status + + + HSPS Pump 6 Control Valve Maintenance Mode + + + HSPS 480V Switchgear 4 Main Breaker Open Status + + + HSPS 480V Switchgear 4 Main Breaker Closed Status + + + HSPS 480V Switchgear 4 Tie Breaker Open Status + + + HSPS 480V Switchgear 4 Tie Breaker Closed Status + + + HSPS Pump Room High Water Level Relay Panel Bypass Enabled + + + A + + + A + + + B + + + B + + + T31 + + + T32 + + + HSPS Reclaim Valve Open Status + + + HSPS Reclaim Valve Closed Status + + + HSPS Discharge Valve Open Status + + + HSPS Discharge Valve Closed Status + + + HSPS Pump 1 + + + -0.05 + + + 3039 + + + 52 + + + -29564 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 189 + + + 0 + + + 0 + + + + 2022 + + + 12 + + + 21 + + + 8 + + + 11 + + + 50 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 6 + + + 21 + + + 2024 + + + 13 + + + 12 + + + 0 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 380.0 + + + 380.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 300.0 + + + 300.0 + + + + 0 + + + 62.5 + + + 57.5 + + + 300.0 + + + 70.01051 + + + 100.0 + + + 0.0 + + + 70.01051 + + + 5.0 + + + 70.01051 + + + 0 + + + + HSPS Pump 2 + + + 0.03125 + + + 2995 + + + 9 + + + -29564 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 174 + + + 0 + + + 0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 6 + + + 21 + + + 2024 + + + 13 + + + 17 + + + 33 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 380.0 + + + 380.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 300.0 + + + 300.0 + + + + 0 + + + 65.0 + + + 55.0 + + + 300.0 + + + 70.01051 + + + 100.0 + + + 60.0 + + + 70.01051 + + + 10.0 + + + 70.01051 + + + 0 + + + + HSPS Pump 3 + + + 0.0625 + + + 3039 + + + 57 + + + -29564 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 198 + + + 0 + + + 0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 6 + + + 14 + + + 2024 + + + 9 + + + 12 + + + 30 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 380.0 + + + 380.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 300.0 + + + 300.0 + + + + 0 + + + 65.85327 + + + 55.85327 + + + 300.0 + + + 70.01051 + + + 100.0 + + + 60.0 + + + 70.01051 + + + 10.0 + + + 70.01051 + + + 0 + + + + HSPS Pump 4 + + + -29308 + + + -16384 + + + 0 + + + 0 + + + 0 + + + 0 + + + 12 + + + 58 + + + 4320 + + + 13 + + + 16 + + + 42 + + + 198 + + + 0 + + + 1 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 7 + + + 17 + + + 2024 + + + 13 + + + 0 + + + 21 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 430.0 + + + 430.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + 0 + + + 75.01051 + + + 65.01051 + + + 30.0 + + + 70.01051 + + + 69.8375 + + + 100.0 + + + 60.0 + + + 70.01051 + + + 10.0 + + + 70.01051 + + + 0 + + + + HSPS Pump 5 + + + -29564 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 4559 + + + 41 + + + 7 + + + 13 + + + 189 + + + 0 + + + 0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 7 + + + 16 + + + 2024 + + + 7 + + + 13 + + + 44 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 300.0 + + + 300.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 380.0 + + + 380.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + 0 + + + 65.0 + + + 55.0 + + + 30.0 + + + 70.01051 + + + -0.1625 + + + 100.0 + + + 60.0 + + + 70.01051 + + + 10.0 + + + 70.01051 + + + 0 + + + + HSPS Pump 6 + + + -29308 + + + -16384 + + + 0 + + + 0 + + + 0 + + + 0 + + + 12 + + + 58 + + + 4532 + + + 14 + + + 23 + + + 55 + + + 148 + + + 0 + + + 0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + + 7 + + + 17 + + + 2024 + + + 13 + + + 0 + + + 21 + + + + 0.0 + + + 0.0 + + + 999999.0 + + + 15201.68 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 300.0 + + + 300.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 400.0 + + + 400.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + 0 + + + 75.01051 + + + 65.01051 + + + 30.0 + + + 70.01051 + + + 70.1125 + + + 100.0 + + + 60.0 + + + 70.01051 + + + 10.0 + + + 70.01051 + + + 0 + + + + HSPS AFD 1 Stopped Status PLC Fault + + + Spare + + + Spare + + + HSPS AFD 2 Stopped Status + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 5 SYNC UP/SYNC DOWN PLC Fault + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 3 Stopped Status PLC Fault + + + Spare + + + Spare + + + HSPS AFD 4 Stopped Status PLC Fault + + + Spare + + + Spare + + + HSPS AFD 5 Stopped Status PLC Fault + + + Spare + + + Spare + + + HSPS AFD 6 Stopped Status PLC Fault + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPS AFD 6 AFD SYNC UP/SYNC DOWN PLC Fault + + + Spare + + + Spare + + + Spare + + + Clearwell Low Level Lockout to ALL AFDs PLC Fault + + + HSPS Pump 2 Control Valve Position PLC Fault + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + Spare + + + HSPA PLC 8001-1 Rack 0 Slot 2 Fault + + + HSPA PLC 8001-1 Rack 0 Slot 4 Fault + + + HSPA PLC 8001-1 Rack 0 Slot 7 Fault + + + HSPA PLC 8001-1 Rack 0 Slot 8 Fault + + + HSPA PLC 8001-1 Rack 0 Slot 9 Fault + + + HSPA PLC 8001-1 Rack 0 Slot 11 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 0 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 1 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 2 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 3 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 4 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 7 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 9 Fault + + + HSPA PLC 8001-1 Rack 1 Slot 11 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 0 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 1 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 2 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 3 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 4 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 8 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 9 Fault + + + HSPA PLC 8001-1 Rack 2 Slot 11 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 0 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 1 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 2 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 3 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 4 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 5 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 6 Fault + + + HSPS PLC 8001-1 Rack 3 Slot 7 Fault + + + HSPS Pump 3 Vibration X-Axis + + + HSPS Pump 3 Vibration Z-Axis + + + HSPS AFD 4 Speed + + + HSPS Motor 4 Vibration X-Axis + + + HSPS Motor 4 Vibration Y-Axis + + + HSPS Pump 4 Discharge Pressure + + + HSPS Pump 4 Vibration Y-Axis + + + HSPS Pump 4 Vibration X-Axis + + + HSPS Pump 4 Vibration Z-Axis + + + HSPS AFD 5 Speed + + + HSPS Motor 5 Vibration X-Axis + + + HSPS Motor 5 Vibration Y-Axis + + + HSPS Pump 5 Discharge Pressure + + + HSPS Pump 5 Vibration Y-Axis + + + HSPS Pump 5 Vibration X-Axis + + + HSPS Pump 5 Vibration Z-Axis + + + HSPS AFD 6 Speed + + + HSPS Motor 6 Vibration X-Axis + + + HSPS Motor 6 Vibration Y-Axis + + + HSPS Pump 6 Discharge Pressure + + + HSPS Pump 6 Vibration Y-Axis + + + HSPS Pump 6 Vibration X-Axis + + + HSPS Pump 6 Vibration Z-Axis + + + HSPS Discharge Line Total Ammonia Indication + + + HSPS Discharge Line Free Ammonia + + + HSPS Discharge Line Monochloramine + + + HSPS Discharge Line Ph + + + HSPS Flow Meter Vault Electrical Room Temperature + + + HSPS Discharge Line Total Chlorine + + + HSPS Low Suction Pressure + + + HSPS Discharge Pressure + + + HSPS SCADA Room Temperature + + + HSPS Electrical Room Ambient Temperature + + + HSPS 480V Switchgear Common Alarm + + + HSPS AFD 1 MPR Alarm + + + HSPS AFD 1 MPR Trip + + + HSPS AFD 1 MPR High Rtd Temperature + + + HSPS AFD 1 Trip + + + HSPS Pump 1 Suction Pressure Loss + + + HSPS AFD 1 Local Pump E-stop + + + HSPS AFD 1 Drive E-stop + + + HSPS AFD 1 Unplanned Stop + + + HSPS AFD 2 MPR Alarm + + + HSPS AFD 2 MPR Trip + + + HSPS AFD 2 MPR High Rtd Temperature + + + HSPS AFD 2 Trip + + + HSPS Pump 2 Suction Pressure Loss + + + HSPS AFD 2 Local Pump E-stop + + + HSPS AFD 2 Drive E-stop + + + HSPS AFD 2 Unplanned Stop + + + HSPS AFD 3 MPR Alarm + + + HSPS AFD 3 MPR Trip + + + HSPS AFD 3 MPR High Rtd Temperature + + + HSPS AFD 3 Trip + + + HSPS Pump 3 Suction Pressure Loss + + + HSPS AFD 3 Local Pump E-stop + + + HSPS AFD 3 Drive E-stop + + + HSPS AFD 3 Unplanned Stop + + + HSPS AFD 4 MPR Alarm + + + HSPS AFD 4 MPR Trip + + + HSPS AFD 4 MPR High Rtd Temperature + + + HSPS AFD 4 Trip + + + HSPS Pump 4 Suction Pressure Loss + + + HSPS AFD 4 Local Pump E-stop + + + HSPS AFD 4 Drive E-stop + + + HSPS AFD 4 Unplanned Stop + + + HSPS AFD 5 MPR Alarm + + + HSPS AFD 5 MPR Trip + + + HSPS AFD 5 MPR High Rtd Temperature + + + HSPS AFD 5 Trip + + + HSPS Pump 5 Suction Pressure Loss + + + HSPS AFD 5 Local Pump E-stop + + + HSPS AFD 5 Drive E-stop + + + HSPS AFD 5 Unplanned Stop + + + HSPS AFD 6 MPR Alarm + + + HSPS AFD 6 MPR Trip + + + HSPS AFD 6 MPR High Rtd Temperature + + + HSPS AFD 6 Trip + + + HSPS Pump 6 Suction Pressure Loss + + + HSPS AFD 6 Local Pump E-stop + + + HSPS AFD 6 Drive E-stop + + + HSPS AFD 6 Unplanned Stop + + + HSPS Pump 1 Control Valve Maintenance Mode + + + HSPS Pump 1 Control Valve Failure + + + HSPS North Sump Pump 1A Fault + + + HSPS North Sump Pump 1B Fault + + + HSPS North Sump Pump Control Power Failure + + + HSPS Pump 2 Control Valve Maintenance Mode + + + HSPS Pump 2 Control Valve Failure + + + HSPS South Sump Pump 2A Fault + + + HSPS South Sump Pump 2B Fault + + + HSPS South Sump Pump Control Power Failure + + + HSPS Pump 3 Control Valve Maintenance Mode + + + HSPS Pump 3 Control Valve Failure + + + HSPS 4160V Switchgear 1 Lock Out Relay Trip + + + HSPS 4160V Switchgear 1 Generator Breaker Open Status + + + HSPS 4160V Switchgear 1 Generator Breaker Closed Status + + + HSPS Primary Substation Transformer 1 Low Oil Level + + + HSPS Primary Substation Transformer 1 Oil High Temperature + + + HSPS Primary Substation Transformer 1 Pressure Relief Device Activation + + + HSPS Primary Substation Transformer 1 Winding High Temperature + + + HSPS Swgr-8112-3 SPD Maintenance Alarm + + + HSPS Pump 4 Control Valve Maintenance Mode + + + HSPS Pump 4 Control Valve Failure + + + HSPS 4160V Switchgear 2 Lock Out Relay Trip + + + HSPS Primary Substation Transformer 2 Low Oil Level + + + HSPS Primary Substation Transformer 2 Oil High Temperature + + + HSPS Primary Substation Transformer 2 Pressure Relief Device Activation + + + HSPS Primary Substation Transformer 2 Winding High Temperature + + + HSPS Swgr-8112-4 SPD Maintenance Alarm + + + HSPS Pump 5 Control Valve Maintenance Mode + + + HSPS Pump 5 Control Valve Failure + + + HSPS 480V Switchgear 3 Lock Out Relay Trip + + + HSPS Suction Pressure Relay Panel Low Pressure Lockout + + + HSPS Substation Transformer 3 Low Oil Level + + + HSPS Substation Transformer 3 Oil High Temperature + + + HSPS Substation Transformer 3 Pressure Relief Device Activation + + + HSPS Substation Transformer 3 Winding High Temperature + + + HSPS SWB-8112-3 SPD Maintenance Alarm + + + HSPS 480V Switchgear 4 Lock Out Relay Trip + + + HSPS Pump Room High Water Level Relay Panel High Level Alarm + + + HSPS Substation Transformer 4 Low Oil Level + + + HSPS Substation Transformer 4 Oil High Temperature + + + HSPS Substation Transformer 4 Pressure Relief Device Activation + + + HSPS Substation Transformer 4 Winding High Temperature + + + HSPS SWB-8112-4 SPD Maintenance Alarm + + + HSPS FMV Electrical Room Building Intrusion Alarm + + + HSPS Meter Vault High Level Alarm + + + HSPS Flow Meter Hatch Open + + + HSPS 480V Switchgear Transfer Failure + + + HSPS 480V Switchgear Common Alarm + + + HSPS Discharge Flow Pulse (1000 Gal) + + + HSPS LP-8112-1 SPD Maintenance Alarm + + + HSPS Net Cabinet Door Open + + + HSPS Net Cabinet DC Power Ok + + + HSPS SCADA UPS Cabinet Door Open + + + HSPS SCADA UPS Cabinet UPS Alarm + + + HSPS Security UPS Cabinet Door Open + + + HSPS Security UPS Cabinet UPS Alarm + + + HSPS Elevator Controller Common Alarm + + + HSPS Elvator Pit Relay Panel Common Alarm + + + HSPS Electrical Building Intrusion + + + HSPS Pump Room Staircase Intrusion + + + HSPS LP-8112-2 SPD Maintenance Alarm + + + HSPS Pump 1 Auto Start + + + HSPS Pump 1 Auto Stop + + + HSPS Pump 1 + + + HSPS Pump 2 Auto Start + + + HSPS Pump 2 Auto Stop + + + HSPS Pump 1 Speed Setpoint + + + HSPS Pump 2 Speed Setpoint + + + HSPS Pump 3 + + + HSPS Pump 3 Auto Start + + + HSPS Pump 3 Auto Stop + + + HSPS Pump 3 Speed Setpoint + + + HSPS Pump 4 + + + HSPS Pump 5 + + + HSPS Pump 6 + + + HSPS Pump 4 Auto Start + + + HSPS Pump 4 Auto Stop + + + HSPS Pump 4 Speed Setpoint + + + HSPS Pump 5 Auto Start + + + HSPS Pump 5 Auto Stop + + + HSPS Pump 5 Speed Setpoint + + + HSPS Pump 6 Auto Start + + + HSPS Pump 6 Auto Stop + + + HSPS Pump 6 Speed Setpoint + + + + + + + + + + + + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + 16#0001 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump1 to Min Speed Init -Stop Seq + + + HSPS Auto select + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + HSPS Swap Run Run A Pump First - Pump 9 Initiate Sequence And Pump 1 FTS + + + HSPS Pump 3 HMI Bypass Command + + + + HSPS Pump 2 Scada Unplanned Stop + + + + + + + HSPS Pump 2 Available In Local + + + HSPS Pump Swap Fail Abort + + + + + + RWPS Pump 9 AutomaticallyTo Man By Local And Ready Alarm + + + + + + + + + + + + + + RWPS Pump 2 AutomaticallyTo Man By Local And Ready Alarm + + + + + + + + + + RWPS Pump 9 Local And Ready Alarm Flag + + + HSPS Pump 1 Scada Unplanned Stop + + + + + HSPS Pump 2 Waiting To Start Another Pump Condition Met + + + + + + + + HSPS Swap Run Run A Pump First - Pump 9 Initiate Sequence And Pump 2 FTS + + + HSPS Pump 1 Initiates Swap Pump + + + HSPS Pump Alternation Failure + + + + HSPS Pump 1 Initiates Swap Pump - Call Other Pump Start Failure + + + HSPS Pump 1 Available In Local + + + HSPS Swap Run Run A Pump First - Pump1 Initiate Sequence And Pump 9 FTS + + + HSPS No Pump is Available for Next Start + + + + HSPS Pump(s) to Min Speed Init -Stop Seq + + + + + + + HSPS Pump 2 Local And Ready Alarm Flag + + + + HSPS Pump 9 Initiates Run First Swap And Fail Reset + + + HSPS Pump 3 Stop Flag + + + + HSPS Pumps Avail Permissive HMI Override + + + + HSPS Next Pump Start Required + + + + + HSPS Swap Run Run A Pump First - Pump 2 Initiate Sequence And Pump 1 FTS + + + + HSPS All Auto Running Pump(s) Start Seq At Min Speed + + + + + + + + HSPS Pump 1 Stop Initiate form Swap + + + HSPS Pump 1 Start Flag + + + HSPS Pump Swap Sequence Checker- Only 1 Pump Is Running + + + + HSPS All Pumps At Min Speed Init -Stop Seq + + + HSPS Pump 3 Waiting To Start Another Pump Condition Met + + + + + + + + + + + + + + + + + + + At Least one 25 MGD pump is running + + + + + + + + HSPS Pump 1 Runtime Priority + + + HSPS Pump 2 Runtime Priority + + + HSPS Pump 3 Runtime Priority + + + 25 MGD Pump Run Time Before Alternation + + + + HSPS 25 MGD Pump Swap Active + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump1 Currently Running Accumulated Time + + + + HSPS Pump2 Currently Running Accumulated Time + + + HSPS Pump3 Currently Running Accumulated Time + + + + + + + + + + + + + HSPS Flow Set Point for Automatic Control + + + + + + + + + + + + + + + + + + + + + + + + HSPS Flow Control PID Auto/Manual Status + + + Minimum AFD Speed SP + + + + + + + HSPS PID Controller Parameters + + + 11183 + + + 15.0 + + + 90.0 + + + 60.0 + + + 100.0 + + + FALSE + + + FALSE + + + 0.21 + + + t#40s + + + 0.5 + + + 0.0 + + + + + + + + HSPS Pump 2 HMI Bypass Command + + + HSPS Pump 1 HMI Bypass Command + + + HSPS ADF 3 Operator LOCKOUT + + + + + HSPS ADF 2 Operator LOCKOUT + + + + HSPS ADF 1 Operator LOCKOUT + + + + + + + + + + + + + PID In Auto Status + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump(s) to Min Speed Init -Stop Seq + + + + + + + + + + + + + + + + + HSPS Pump 4 HMI Bypass Command + + + + + + + HSPS All Auto Running Pump(s) Start Seq At Min Speed + + + + HSPS No Pump is Available for Next Start + + + + + + + + At Least one 45 MGD pump is running + + + + + + + + + + + + + + + + + + HSPS ADF 4 Operator LOCKOUT + + + HSPS Pumps Avail Permissive HMI Override + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump6 Currently Running Accumulated Time + + + HSPS Pump 5 HMI Bypass Command + + + + + + HSPS 45 MGD Pump Swap Active + + + + 45 MGD Pump Run Time Before Alternation + + + + + + + + + + + HSPS Pump 5 Runtime Priority + + + HSPS Pump 4 Runtime Priority + + + + + HSPS ADF 6 Operator LOCKOUT + + + + + HSPS Pump Alternation Failure + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump Swap Fail Abort + + + + + + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + HSPS Pump4 Currently Running Accumulated Time + + + + + + + + + + + + + + HSPS Pump5 Currently Running Accumulated Time + + + + + HSPS Pump 6 Runtime Priority + + + + + HSPS Pump Swap Sequence Checker- Only 1 Pump Is Running + + + + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + + + + HSPS Pumps To Min Speed Setpoint Flag Reset + + + + + + + + + + + + + + + HSPS ADF 5 Operator LOCKOUT + + + + HSPS Pump 6 HMI Bypass Command + + + + HSPS All Pumps At Min Speed Init -Stop Seq + + + HSPS Next Pump Start Required + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump 6 Control Valve Failure + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + + + + + HSPS AFD 1 Ramp Parameters + + + 106.0 + + + 106.0 + + + + + + + + + HSPS AFD 4 Ramp Parameters + + + 106.0 + + + 106.0 + + + + HSPS AFD 2 Ramp Parameters + + + 106.0 + + + 106.0 + + + + HSPS AFD 5 Ramp Parameters + + + 106.0 + + + 106.0 + + + + HSPS AFD 3 Ramp Parameters + + + 106.0 + + + 106.0 + + + + HSPS AFD 6 Ramp Parameters + + + 106.0 + + + 106.0 + + + + HSPS Minimuim number of pumps for Auto are available + + + + + + HSPS 0 = Start / 1 = Stop + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Lo Clearwell Level Lockout SP + + + + + HSPS Max Pressure Before Lockout SP + + + + + Number of 45 MGD pumps for High Flow + + + + + HSPS Lo Suction Pressure Lockout SP + + + + + + + + + + + + + + + + + Pump 1 Bypass Mode + + + Pump 3 Bypass Mode + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + If VLV 8103-1B or VLV-8103-1C Closed Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Loss of Communication with PLC 700-1 + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS 4160V Switchgear 2 Generator Breaker Closed Status + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Discharge Pressure Lockout Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + + HSPS Clear Well Low Lockout Alarm + + + 16388 + + + 64 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 265 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 265 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS SCADA UPS Cabinet in Bypass + + + + HSPS Security UPS Cabinet in Bypass + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump 1 Vibration X-Axis + + + 230 + + + -32668 + + + 0 + + + 0 + + + 2 + + + 0 + + + 3434 + + + 0.05047501 + + + 0.05047501 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 58 + + + 4 + + + 4096 + + + 0 + + + 0 + + + 16652 + + + 1 + + + 0 + + + 30.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 16652 + + + + HSPS Pump 1 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4138 + + + 0.112075 + + + 0.112075 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 1 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4121 + + + 0.1105875 + + + 0.1105875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 720 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 720 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 720 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4137 + + + 0.1119875 + + + 0.1119875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4147 + + + 0.1128625 + + + 0.1128625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 2 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4173 + + + 0.1151375 + + + 0.1151375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 2 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4149 + + + 0.1130375 + + + 0.1130375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 2 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4071 + + + 0.1062125 + + + 0.1062125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4097 + + + 0.1084875 + + + 0.1084875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4164 + + + 0.11435 + + + 0.11435 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4112 + + + 0.1098 + + + 0.1098 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4330 + + + 0.128875 + + + 0.128875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4090 + + + 0.107875 + + + 0.107875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 3 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4220 + + + 0.11925 + + + 0.11925 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4227 + + + 0.1198625 + + + 0.1198625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + -0.25 + + + 2.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 1 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 5.0 + + + 0.0 + + + -0.05 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 4 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4175 + + + 0.1153125 + + + 0.1153125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 4 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4301 + + + 0.1263375 + + + 0.1263375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 4 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4262 + + + 0.122925 + + + 0.122925 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 3 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4109 + + + 0.1095375 + + + 0.1095375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 3 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4116 + + + 0.11015 + + + 0.11015 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 5 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4175 + + + 0.1153125 + + + 0.1153125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 5 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4110 + + + 0.109625 + + + 0.109625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 6 Vibration Y-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4366 + + + 0.132025 + + + 0.132025 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + -1.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 5 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4127 + + + 0.1111125 + + + 0.1111125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4138 + + + 0.112075 + + + 0.112075 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4079 + + + 0.1069125 + + + 0.1069125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 6 Vibration Z-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4317 + + + 0.1277375 + + + 0.1277375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4331 + + + 0.1289625 + + + 0.1289625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + -1.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4351 + + + 0.1307125 + + + 0.1307125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 6 Vibration X-Axis + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4502 + + + 0.143925 + + + 0.143925 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + -1.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4181 + + + 0.1158375 + + + 0.1158375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4054 + + + 0.104725 + + + 0.104725 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4130 + + + 0.111375 + + + 0.111375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4111 + + + 0.1097125 + + + 0.1097125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4117 + + + 0.1102375 + + + 0.1102375 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4103 + + + 0.1090125 + + + 0.1090125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4187 + + + 0.1163625 + + + 0.1163625 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4158 + + + 0.113825 + + + 0.113825 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4191 + + + 0.1167125 + + + 0.1167125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4162 + + + 0.114175 + + + 0.114175 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4167 + + + 0.1146125 + + + 0.1146125 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + 230 + + + 0 + + + 0 + + + 0 + + + 2 + + + 0 + + + 4193 + + + 0.1168875 + + + 0.1168875 + + + 0.1 + + + 1.5 + + + 4000.0 + + + 20000.0 + + + 0.44 + + + 0.28 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 1.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Electrical Room Temperature + + + 254 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 13617 + + + 78.91475 + + + 78.91475 + + + 14.0 + + + 122.0 + + + 4000.0 + + + 20000.0 + + + 120.0 + + + 90.0 + + + 50.0 + + + 20.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 14.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + + + + + PLC PANEL INTRUSION + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + PLC PANEL DC POWER OK + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + HSPS ELECTRICAL BUILDING INTRUSION + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 5.0 + + + 5.0 + + + + 5.0 + + + 0 + + + + + HSPS Digital Flow Totalizer Reset + + + WA3260-8103-1-FG Digital Flow Today + + + + + WA3260-8103-1-FG Digital Flow Today + + + + + WA3260-8103-1-FG Digital Flow Over Time + + + + + + + HSPS PID Flow Deviation Alarm + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 600.0 + + + 600.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Pump 1 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4094 + + + 0.5875 + + + 0.5875 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Pump 1 Control Valve Position + + + + HSPS Pump 2 Control Valve Position + + + HSPS Pump 2 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4009 + + + 0.05625 + + + 0.05625 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + HSPS Pump 3 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4069 + + + 0.43125 + + + 0.43125 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + HSPS Pump 4 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 19993 + + + 99.95625 + + + 99.95625 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + HSPS Pump 5 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 4005 + + + 0.03125 + + + 0.03125 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + + + HSPS Pump 6 Valve Position + + + 224 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 19965 + + + 99.78125 + + + 99.78125 + + + 0.0 + + + 100.0 + + + 4000.0 + + + 20000.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 500 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 30.0 + + + 30.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + 0.0 + + + 0.0 + + + 0.0 + + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0.0 + + + 0 + + + + -1.0 + + + 0 + + + + HSPS Recloser 1 Open Status + + + HSPS Recloser 1 Closed Status + + + HSPS Recloser 2 Open Status + + + HSPS Recloser 2 Closed Status + + + HSPS Recloser 1 Trip Status + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + HSPS Recloser 2 Trip Status + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 0.0 + + + 0.0 + + + + 0.0 + + + 0 + + + + + + + + + + + Communication Loss with PLC 8130-1 Alarm + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 1 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0 + + + + + + HSPS Loss of Power Alarm + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0.0 + + + + 4 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0.0 + + + 0 + + + + HSPS in Auto + + + HSPS Manual select + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS AFD 3 SYNC UP/SYNC DOWN PLC Fault + + + HSPS AFD 1 SYNC UP/SYNC DOWN PLC Fault + + + HSPS Pump 1 Control Valve Position PLC Fault + + + HSPS AFD 4 AFD SYNC UP/SYNC DOWN PLC Fault + + + HSPS AFD 2 AFD SYNC UP/SYNC DOWN PLC Fault + + + Spare + + + + HSPS Pump 3 Control Valve Position PLC Fault + + + HSPS Pump 4 Control Valve Position PLC Fault + + + Spare + + + + spare + + + Spare + + + + + Spare + + + + HSPS Pump 5 Control Valve Position PLC Fault + + + HSPS Pump 6 Control Valve Position PLC Fault + + + Set to 1 when the card is correct and the application is consistent with CPU Internal Application RAM + + + Set to 1 to start a backup operation (transfer application from RAM to card) + + + When Set to 1 enables automatic backup of current values + + + + + + + + Set to 1 to replace initial values with current values + + + 1 means that the application backup is consistent + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + HSPS Discharge Flow + + + 74.175 + + + 224 + + + 0 + + + 2 + + + 0 + + + 2 + + + 0 + + + 11912 + + + 74.175 + + + 0.0 + + + 150.0 + + + 4000.0 + + + 20000.0 + + + 150.0 + + + 150.0 + + + 0.0 + + + 0.0 + + + 3100.0 + + + 20500.0 + + + 3500.0 + + + 0.0 + + + 0.0 + + + 26720.93 + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 750 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1000 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 1 + + + 0 + + + 15.0 + + + 15.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 60.0 + + + 60.0 + + + + + 2 + + + 0 + + + 2 + + + 0 + + + 0 + + + 0 + + + 250 + + + 0 + + + 5.0 + + + 5.0 + + + + + 2 + + + 0 + + + 0 + + + 0 + + + 0 + + + 0 + + + 3 + + + 74.175 + + + 150.0 + + + 0.0 + + + 40.10878 + + + 72.91768 + + + 26720.93 + + + 491 + + + 26680.82 + + + 26720.93 + + + 0.0 + + + + 2022 + + + 11 + + + 30 + + + 9 + + + 23 + + + 0 + + + + 432000.0 + + + 0.01753555 + + + 0.0001717014 + + + 40.09124 + + + 0.0 + + + 102 + + + + -1.0 + + + 0 + + + + + PLC Clock Control with Midnight Flag.(Version 1.0 - M580) + + + + + PLC Time and Date updated to User or SCADA Server values when set "true" + + + + Entered Month Value (1-12) + + + + Entered Day of Month Value (1-31) + + + + Entered Year Value (2017-2099 or 00-99) + + + + Entered Hour Value (0-12) + + + + Entered Minute Value (0-59) + + + + Entered Seconds Value (1-59) + + + + + + Current Day of Week from PLC Calendar + + + + Current Month from PLC Calendar + + + + Current Day from PLC Calendar + + + + Current Year from PLC Calendar + + + + Current Hour from PLC Clock + + + + Current Minuite from PLC Clock + + + + Current Second from PLC Clock + + + + New Day - Set to true for 1 Second at PLC Clock Midnight. + + + + + + PLC Real Time Clock Value + + Seconds (16#ss,-) + + + Hour, Minute (16#hhmm) + + + Month, Day (16#mmdd) + + + year (16#yyyy) + + + + Internal Time being Written to PLC Real Time Clock + + + + + This section writes to the PLC clock + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + After Block inputs are limted to appropriate range, the datatypes are converted and put into an array used by the PLC Real time Clock, when the update bit is set true, the clock is updated with the array values. + + + SYSTEM TIME - SET PLC REAL TIME CLOCK +Update the PLC Real time Clock with conditioned values + + + Year into fourth integer of the Set DateTime Array - set_plc_rtc + + + Move array into Day Time format and update the clock + + + If entered value is greater than 2010, subtract 2000, else limit from 0-99 & add 2000. + + + Minutes and Hours into the second integer of the Set DateTime Array - set_plc_rtc + + + Day and Month into Third integer of the Set DateTime Array - set_plc_rtc + + + + + + + This section reads the PLC clock + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Derive Day and Month from the third integer of the DateTime Array - plc_rtc + + + Use a Multiplexer to select proper BCD Type values for Day of Week + + + SYSTEM TIME - GET PLC REAL TIME CLOCK CURRENT VALUES +- Derive Day of Week, Second, Minuite, Hour, Day, Month, and Year from PLC System Real Time Clock DT Format. + + + Extract the PLC Real TIme Clock into DATE TIME Format, then extract the DATE TIME into an array. + + + Derive Seconds from the first integer of the DateTime Array - plc_rtc + + + Derive Minutes and Hours from the second integer of the DateTime Array - plc_rtc + + + Derive year from the final integer of the DateTime Array - plc_rtc + + + + + + + This section determines when a new day has occured + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + If PLC Clock Hour =0, Minuite=0, and Second=0, flag new day. + + + SYSTEM TIME - CALCULATE MIDNIGHT +- At midnight generate a New Day flag for Totalizer Reset + + + + + + + + Analog Inputs + + + + + Raw from Input Card + + + + Reset all Alarms On this DFB + + + + Used for Scaling to EU + + + + Used for Scaling to EU + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + Suppress Level Alarms (LL, L, H, HH, & ROC) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + System Time + + + + Analog Input DDT + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annuciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + Scaled Value in Engineering Units + + + + Locked by Program + + + + + + + + + + + + Device has a Broken Loop Alarm + + + Device Signal is Under Range Alarm + + + Device Signal is Low Low Alarm + + + Device Signal is Low Alarm + + + Device Signal is High Alarm + + + Device Signal is High High Alarm + + + Device Signal is Over Range Alarm + + + Device Rate of Change Alarm + + + + Totalizing DFB + + + PLC IO Fault + + + + + + totalized value since totalizer was last reset. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Ain.Raw: Raw Value from input card + + + To avoid division by zero, the RawMin and RawMax must be different. + + + totalized value since totalizer was last reset. + + + Test for a Rate of Change fault. +Trip the imidiate fault if enabled and absolute value of the change (* 5 to get change per second based on 200 ms period) is greater than the set point. +Write current EU to old value for next scan. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + +ABS(Old_Val-VALU)*5 > RCSP + + + Interlock: If the Interlock is Enabled, check to see if the VALU(Engineering Unit) is Greater than the Interlock Setpoint. + + + Ain.Raw: Raw Value from input card + + + Ain.RawMax: Used for Scaling to EU + + + Low Low Alarm. + + + Test for a Over Range fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + Ain.INTK_SP: Interlock Setpoint + + + GlobalReset: Reset all Alarms in this DFB + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + Ain.HH_SP: High High Alarm Limit + + + Ain.Raw: Raw from Input Card + + + Move Alarm Notify # to 0 if no Alarms are active. + + + If above the Interlock Setpoint you are now interlocked. The Interlock will automatically clear when the VALU is below the Interlock reset setpoint. + + + Ain.PLCFault: + + + Ain.LL_SP: Low Low Alarm Limit + + + Under Range Alarm. + + + Ain.PCUnShelve: + + + Ain.VALU: Scaled Value in Engineering Units + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + High High Alarm. + + + Ain.GlobalReset: Reset all Alarms in this DFB + + + PLCFault: + + + Ain.Raw: Raw Value from input card + + + PCUnShelve: + + + Ain.Raw: Raw Value from input card + + + Test for a Low fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.BLSP: Raw Low Limit for Broken Loop + + + Map items to DDT + + + Ain.RawMin: Used for Scaling to EU + + + This is to ensure that the reset setpoint doesn't get set above the interlock setpoint. + + + Set all Alarm DFB's Shelve Duration Time. The HMI is using "almHighHigh" for the initial Shelve Duration. + + + Clear all HMI Commands + + + Call the Alarm AOI for the IO PLC Fault + + + Over Range Alarm. + + + Test for a Broken loop fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.Raw: Raw Value from input card + + + if any one of the acknowledged bits are on, set the GenAlarmAcked bit + + + RawMax: Used for Scaling to EU + + + Set true to totalize flow. + + + Rate of Change Alarm. + + + Ain.LL_SP: Low Low Alarm Limit + + + Ain.SuppressLA: Suppress Level Alarms (LL, L, H, HH, ROC) + + + Ain.PCSuppress: + + + Map items from DDT + + + Ain.Raw: Raw Value from input card + + + Raw: Raw from Input Card + + + Ain.ORSP: Over Range Raw Alarm Limit + + + PCUnSuppress: + + + Ain.URSP: Under Range Raw Alarm Limit + + + Ain.RawMax: Raw Value used for scaling to EU + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Ain.RawMin: Raw Value used for scaling to EU + + + Scale the raw input into engineering units. + +((VMAX - VMIN) * (Raw - RawMin)/(RawMax - RawMin)) + VMIN + + + RawMin: Used for Scaling to EU + + + if any one of the Alarms are on, set the general GenAlarm bit + + + Ain.INTK_SP: Interlock Setpoint + + + PCSuppress: + + + Ain.Raw: Raw Value from input card + + + Ain.Raw: Raw Value from input card + + + Ain.VMIN: Scaled Value with Raw at RawMin + + + Ain.RCSP: Max Absolute Chnage in EU per second to trip the Rate of Change Fault + + + Ain.INTK_SP: Interlock Setpoint + + + Test for a High High fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Test for a Under Range fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + Test for a High fault. +Trip the immediate fault if enabled and raw is greater than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + Ain.INTK_Reset_SP: Interlock Reset Setpoint + + + SuppressLA: Suppress Level Alarms (LL, L, H, HH, ROC) + + + Low Alarm. + + + Reset all Alarms in this AOI + + + if any one of the Annunciate bits are on, set the general GenAnnuciate bit + + + High Alarm. + + + Broken Loop Alarm. + + + Ain.PCUnSuppress: + + + Ain.H_SP: High Alarm Limit + + + On First Scan reset all Alarms + + + Test for a Low Low fault. +Trip the immediate fault if enabled and raw is less than the set point. +Reset the alarm in either the AOI reset or the Global Reset are set. +Process the Alarm with the Alarm AOI +Set the Alarm bit. + + + Ain.RawMin: Raw Value used for scaling to EU + + + + + + + + DDT for Analog DFB: Analog Inputs, No Strings + + + + First Integer of packed Bits + + + Reset all Alarms On this PLC + + + + Enable High High Alarm + + + + Enable High Alarm + + + + Enable Low Alarm + + + + Enable Low Low Alarm + + + + Enable Broken Loop Alarm + + + + Enable Over Range Alarm + + + + Enable Under Range Alarm + + + + Enable Rate of Change Alarm + + + + Suppress All Alarms + + + + Suppress Level Alarms (LL, L, H, HH, & ROC) + + + + RawMin = RawMax: Causes division by zero + + + + High High Alarm + + + + High Alarm + + + + Low Alarm + + + + Low Low Alarm + + + + Second Integer of packed Bits + + + Broken Loop Alarm + + + + Over Range Alarm + + + + Under Range Alarm + + + + Rate of Change Alarm + + + + Reset all Alarms in this DFB + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annunciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + High High Fault + + + + High Fault + + + + Low Fault + + + + Low Low Fault + + + + Broken Loop Fault + + + + Over Range Fault + + + + Under Range Fault + + + + Third Integer of packed Bits + + + Rate of Change Fault + + + + Set true to totalize flow. + + + + Tagged Out of Service + + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + + Locked by program (ESD) + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Enable Interlock Alarm + + + + Shelve Command from HMI + + + + Shelved Status + + + + Suppress Command from HMI + + + + Suppressed Status + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed Bits (SPARE) + + + Spare Integer + + + Spare Integer + + + Raw from Input Card + + + Scaled Value in Engineering Units + + + Prevoius Value for Rate of Change Checking + + + Scaled Value with Raw at RawMin + + + Scaled Value with Raw at RawMax + + + Used for Scaling to EU + + + Used for Scaling to EU + + + High High Alarm Limit + + + High Alarm Limit + + + Low Alarm Limit + + + Low Low Alarm Limit + + + Raw Low Limit for Broken Loop + + + Over Range Raw Alarm Limit + + + Under Range Raw Alarm Limit + + + Max Absolute Change In EU per Second to trip the Rate Of Change Fault + + + Interlock Alarm Limit + + + totalized value since totalizer was last reset. + + + High High Alarm DDT + + First Integer of packed Bits + + + Second Integer of packed Bits + + + + High Alarm DDT + + + Low Alarm DDT + + + Low Low Alarm DDT + + + Broken Loop Alarm DDT + + + Over Range Alarm DDT + + + Under Range Alarm DDT + + + Rate Of Change Alarm DDT + + + PLC IO Fault Alarm DDT + + + Totalizer DDT + + + Interlock Reset Setpoint + + + Combined Alarm Value Notification for HMI + + + + + DDT for Alarm DFB, No Strings + + + + First Integer of packed Bits + + + Discrete input condition indicating a faulted state. + + + + Value of the Fault input that indicates an alarm condition + + + + Used to reset all alarms in the PLC + + + + Fault Is In Alarm (on longer than the delay) + + + + Alarm: Output indicating a fault has progressed to alarm state. + + + + Annunciate, indicator to flash alarm on HMI. Set once a fault has reached alarm status. Setting Ack will reset Annuciate and will only set again once the fault transitions from False to True again. + + + + Acknowledged: Alarm has been acknowledged, will stop the individual alarms from blinking on the popups + + + + Alarm is latched but can be reset becasue condition is cleared. + + + + Reset this alarm only + + + + Acknowledge Command + + + + Remove the Acknowledge Status + + + + Maintenance Command to Enable Alarm + + + + Maintenance Command to Disable Alarm + + + + Operator Command to Shelve Alarm + + + + Operator Command to UnShelve Alarm + + + + Supervisor Command to Suppress Alarm + + + + Second Integer of packed Bits + + + Supervisor Command to Unsuppress Alarm + + + + Alarm and Events Shelve Timer Done + + + + Discrete Input condition indicating a Bad Signal condition + + + + Alarm and Events Bools + + + Suppress Alarm Command to AE Server + + + + UnSuppress Alarm Command to AE Server + + + + Shelve Alarm Command to AE Server + + + + Unshelve Alarm Command to AE Server + + + + Enable Alarm Command to AE Server + + + + Disable Alarm Command to AE Server + + + + Acknowlege Command to AE Server + + + + Reset Command to AE Server + + + + Alarm Suppressed Status from AE Server + + + + Alarm Shelved Status from AE Server + + + + Alarm Disabled Status from AE Server + + + + Alarm Acknowledged Status from AE Server + + + + Alarm Command to AE Server + + + + Spare Int + + + Spare Int + + + Alarm Value Notification for Alarm and Event Server + + + Alarm and Events Severity (0-1000) + + + Alarm and Events Suppress Duration Setpoint + + + Alarm Delay: Seconds before a fault will progress to alarm state. + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + DDT for Tot Ladder DFB: Totalizes analog value, provides increased precision compared to built in totalizer, No Strings + + + + First Integer of Packed Bits. + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + Start Totalizing becasue flow is above the minimum + + + + HMI Command to Reset Flow Totals + + + + + + + Second Integer of Packed Bits. (SPARE) + + + Third Integer of Packed Bits. (SPARE) + + + Fourth Integer of Packed Bits. (SPARE) + + + Spare Integer + + + Spare Integer + + + Time base of flow: 0 = per Second, 1 = per Minute, 2 = per Hour, 3 = per Day + + + Scaled Analog Value + + + Max Scaled Analog Value + + + Low Flow Cut Off Percent of Max Flow That Stops Totaling + + + Today's Total Flow + + + Yesterday's Total Flow + + + Total FLow Since Last Reset + + + Counts 500 days + + + Keep total for past 500 days + + + + In flow units + + + Time the total was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + How often per unit of time is analog value sampled + + + Total Flow for the Current Minute + + + Total Flow for One 5th of One Second + + + Total Flow of all Completed Minutes Today + + + Totalized Value + + + + + + This DFB supports alarming on a discrete value (Fault). The alarm can be tripped by Fault being 0 or 1 (as defined by the AlarmState input). + + + + + Discrete input condition indicating a faulted state. + + + + + Value of the Fault input that indicates an alarm condition + + + + + Discrete input condition indicating a Bad Signal condition + + + + + + + Global Reset from Logic + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Alarm DDT + + + + + + Alarm: Output indicating a fault has progressed to alarm state. + + + + + Annunciate, indicator to flash alarm on HMI. Set once a fault has reached alarm status. Setting Ack will reset Annuciate and will only set again once the fault transitions from False to True again. + + + + + Acknowledged: Alarm has been acknowledged, will stop the individual alarms from blinking on the popups + + + + + Alarm is latched but can bee reset becasue condition is cleared. + + + + + Fault Is In Alarm (on longer than the delay) + + + + 1=Alarm has been suppressed, shelved or disabled, display "S" icon + + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + + + Alarm Suppressed Status + + + Alarm Disabled Status + + + Alarm Shelved Status + + + + + True for one scan following the alarm tripping. + + + + + + + + + + + + Working Internal Alarm Suppressed Status + + + Number of Minutes until this alarm unshelves itself + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Used to reset all alarms in the PLC + + + + + + + + Reset: HMI input used to reset an alarm once the fault has been cleared. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Discret input indicating a faulted state + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + + + + Discret input indicating a faulted state + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + + + Value of the fault input indicates an alarm condition + + + + + + + + + + Value of the fault input indicates an alarm condition + + + + + Fault is in Alarm - on longer than the delay + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Alarm Severity: 1=Alert, 2..250=Low, 251..500=Medium, 501..750=High, 751..1000=Urgent + + + Latch Alarm when the alarm trips. Hold it latched until reset while fault timer is not done. + + + This rung receives the Maintenance Alarm Enable Command (Enable wins over Disable) +NOTE: Disabled can also be set/cleared directly by the HMI (FTA&E support). + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + This rung times how long the alarm has been shelved. +If the Shelf Timer expires (and its preset > 0), automatically unshelve the alarm. +If the command is received while shelved, the shelf timer starts over (reset). + + + Send Alarm Acknowldege to AE Server + + + This rung receives the Operator Unshelve Command (Unshelve wins over Shelve) +and the Program Unshelve Command +Also Unshelve the alarm if the Shelf Timer expires (if preset > 0). + +NOTE: Shelved can also be set/cleared directly by the HMI (FTA&E support). + + + Map items to DDT + + + This rung receives the Maintenance Alarm Disable Command + + + Latch the annunciate bit when the alarm ccurs. Unlatch when either Acked or the fault clears. + + + Clear HMI Commands after a short periof of time. The timers were used to allow multiple alarms to be used in a single DFB such as the Ain DFB, and not have the first ACK and RESET turn off before the others see it. + + + Notify Level (color, blink) is determined here. + +0 = No Alarm +8 = Alert severity, resettable, unacknowledged +9 = Alert severity, resettable +10 = Alert severity, acknowledged +11 = Alert severity, unacknowledged +12 = Alert severity, Bad, resettable, unacknowledged +13 = Alert severity, Bad, resettable +14 = Alert severity, Bad, acknowledged +15 = Alert severity, Bad, unacknowledged +16 = Low severity alarm, resettable, unacknowledged +17 = Low severity alarm, resettable +18 = Low severity alarm, acknowledged +19 = Low severity alarm, unacknowledged +20 = Low severity, Bad, resettable, unacknowledged +21 = Low severity, Bad, resettable +22 = Low severity, Bad, acknowledged +23 = Low severity, Bad, unacknowledged +32 = Medium severity alarm, resettable, unacknowledged +33 = Medium severity alarm, resettable +34 = Medium severity alarm, acknowledged +35 = Medium severity alarm, unacknowledged +36 = Medium severity, Bad, resettable, unacknowledged +37 = Medium severity, Bad, resettable +38 = Medium severity, Bad, acknowledged +39 = Medium severity, Bad, unacknowledged +48 = High severity alarm, resettable, unacknowledged +49 = High severity alarm, resettable +50 = High severity alarm, acknowledged +51 = High severity alarm, unacknowledged +52 = High severity, Bad, resettable, unacknowledged +53 = High severity, Bad, resettable +54 = High severity, Bad, acknowledged +55 = High severity, Bad, unacknowledged +64 = Urgent severity alarm, resettable, unacknowledged +65 = Urgent severity alarm, resettable +66 = Urgent severity alarm, acknowledged +67 = Urgent severity alarm, unacknowledged +68 = Urgent severity, Bad, resettable, unacknowledged +69 = Urgent severity, Bad, resettable +70 = Urgent severity, Bad, acknowledged +71 = Urgent severity, Bad, unacknowledged + + + Send Alarm Acknowldege to AE Server + + + Map items from DDT + + + Send Alarm Status to AE Server + + + ============================================================ +VALUE / STATUS GENERATION +============================================================ +This rung copies the internal working status (Suppressed, In Alarm) +to public Status bits. Note that internal working bits are used so that +outside objects cannot manipulate the state of this object +by setting/clearing its Status and Alarm bits. + +Public Status is generated for: +Alarm (with minimum ON time to be seen by polling) +Alarm Suppressed +Unsuppressed, Unshelved and Enabled are generated for HMI. + +(Ack, Shelved and Disabled can be set/cleared by the HMI directly. +Note that these bits are "read/write" outputs in the parameter definition.) + + + Suppress is cleared if the program command for suppress is cleared + + + Latch the unacknowledged status if the alarm goes away without being acknowledged or reset or re-occuring. + + + Start delay timer when fault is the same as the alarm state. + + + Send Alarm Acknowldege to AE Server + + + Set delay time (miliSeconds) based on alarm delay in seconds. Then convert to type TIME. + + + Send Alarm Acknowldege to AE Server + + + This rung calculates the number of seconds until this alarm "unshelves" itself. +If the alarm is already unshelved, clear this number. + + + This rung receives the program command for suppress + + + Latch Acked if acknowledged or reset by the HMI while the alarm is active. Break the latch if the alarm trips again (if may have cleared while latched and tripped again). Break the latch if another alarm outside this DFB + + + This rung receives the Operator Shelve Command. +If the command is received while shelved, the shelf timer starts over (reset). + + + These synchronize the Alarm and Event Statuses with the alarm + + + ============================================================ +COMMAND PROCESSING +============================================================ +These rungs handle received Commands: +Operator Commands (Operxx) and Maintenance Commands +(MCmd_xx) from the HMI and +Program Command (PCmd_xx) from other objects. + +NOTE: ALARM COMMANDS ARE ACCEPTED REGARDLESS OF MODE. + +This rung receives the Program Alarm Inhibit Command. + + + + + + + + Totalizes analog value, provides increased precision compared to built in totalizer + + + + + Scaled Analog Value + + + + Max Scaled Analog Value + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + + + System Time + + + + Counts 500 days + + + + Totalizer DDT + + + + + + Today's Total Flow + + + + Yesterday's Total Flow + + + + Total FLow Since Last Reset + + + + + + + Counts 500 Days + + + Counts 500 Days Reset + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 500 Day Count + + + Move 0 into 500 Day Total Count + + + Calculate the current days total (the total for today of all completed minutes plus the current minute) + + + Convert current flow rate to total flow for the last 200 ms. + + + Month + + + Move 0 into Total Flow of all Completed Minutes Today + + + Calculate the 500 day total (the total of the competed days plus plus the current day) + + + Low Flow Cutoff Percent of Max Flow That Stops Totalling + + + HMI Command to Reset Flow Totals + + + Determine if a Day Roll Over will take place this scan + + + Day + + + Total the flow for two minutes. Don't total for too long or the rounding error becomes significant. Dont total while flow is too low. + + + Total Flow for the Current Minute + + + Map items to DDT + + + Oneshot resets values on day change + + + Total Flow for the Current Minute + + + How often per unit of time is analog value sampled + + + If rolling the day: +Move todays total to yesterdays. +Add todays total to the TotalTotal. +Clear todays total. +Count the number of daily rolls. + + + Total Flow of all Completed Minutes Today + + + Total Flow of all Completed Minutes Today + + + On reset command from the HMI, Reset the base totals that calcualte all the other totals. + + + Move 0 into Total Flow for the Current Minute + + + Determine what value to divide summation by to get correct units based on the time base of the flow units. + + + Minute + + + Year + + + Map items from DDT + + + Totalized Value + + + Yesterday's Total Flow + + + Time base of flow +0 = per Second +1 = per Minute +2 = per Hour +3 = per Day + + + Start Totalizing because flow is above the minimum + + + Calculate the overall total (the total of the 500 day total plus the current Total) + + + Start Totalizing because flow is above the minimum + + + Low flow Cutoff in Units + + + Keep total for past 500 days + + + Keep total for past 500 days + + + Move 0 into Two Minute Count + + + Today's Total Flow + + + Totalized Value + + + Two Minute Count + + + Yesterday's Total Flow + + + Total Flow for one 5th of One Second + + + Hour + + + 500 Count Days reset + + + Total Flow Since Last Reset + + + Minute + + + On First Scan reset all Alarms + + + Hour + + + After two minutes (600 scans, each 200ms) or if it is a day roll over: +Add the two minutes total to the todays total. +Clear the two minute total and reset the scan count. + + + HMI Command to Reset Flow Totals + + + + + + + + Variable Speed Motor + + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + 1 = remote/local input wired 0 = not wired + + + + Set to 1 if there is An auto routine. Used to hide or show Auto display on HMI + + + + 1 = Manual Mode Disabled, Always in Auto 0 = Operator may run device in Auto or Manual + + + + Device Running Status + + + + Motor Fail Status from Motor Controller + + + + VFD SPEED SETPOINT FROM PLC + + + + Speed Indication Feedback from Device + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + 1 = VFD using Hz (0-60 Hz) 0 = VFD using Percentages (0-100%) + + + + Used to reset all alarms in the PLC + + + + Locked by program (ESD) + + + + Auto Start from Auto Logic + + + + Auto Stop from Auto Logic + + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + + + + + + System Time + + + + Motor VFD DDT + + + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Output to Physical Device + + + + + + Device Run Command + + + + At least one alarm on this device is active. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + Acknowledged: At least one alarm has been acknowledged. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + At least one alarm is latched and all latched alarms are resetable + + + + Device Failed to Start + + + + Device Failed to Stop + + + + General Failure Alarm from Motor Drive + + + + Deviation Alarm from Logic + + + + Fail to Start, Fail to Stop or Motor Failure alarm is active + + + + Restart Delay Remaining: in seconds + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + + + Timer for preventing Device from being rapidly started and stopped: Preset Time + + + Timer for preventing Device from being rapidly started and stopped: Preset Time Real + + + One minute counter while Motor is Running + + + + One minute counter while Motor is Running + + + + + Internal Stop Command + + + Internal Start Command + + + + Timer for preventing Device from being rapidly started and stopped + + + Device Failed To Start + + + Device Failed To Stop + + + Device Motor Failed + + + Speed Deviation Alarm + + + One Shot for transition from Manual to Remote + + + + + + + Internal Run State: 1 = Motor should be running. 0 = Motor should be stopped. + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + Move desired set time into the Inhibit Timer if it's not the First Scan. + + + Motor Run Time Accumulcation + Motor Run Timer Elapsed time. + + + ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + Speed Deviation Alarm Time Remaining + + + VFDMinSP: VFD Minimum Setpont + + + Manual Acknowledge Command from HMI. + + + VFDScale: VFD Output in EU to be Scaled + + + RTTodayMin: Run Time Minutes Today. + + + Monitor a START request for the present state to set the INTERNAL START +PC_MAN and PC_AUTO) only work if in remote (or remote is not enabled) and the inhibit timer is done. +If remote is enabled and in local, monitor for local starts to support bumpless transfer to Remote. + + + Motor Run Timer + + + VFDScale: VFD Output in EU to be Scaled + + + Day + + + At least one alarm on this device is active. + + + IF the motor is running, update the last run date for the motor. + + + RTTodayMin: Run Time Minutes Today. + + + Reset Count of Starts Command from HMI. + + + Device Run Command + + + RTTodayMin: +Run Time Minutes Today + + + Call the Alarm AOI for the fail to start alarm + + + Call the Alarm AOI for the fail to stop alarm + + + VFDScale: VFD Output in EU to be Scaled + + + Restart Delay: Seconds to inhibit motor start after motor stops. + + + Reset Runtimes if the reset button has been pressed + + + Locked by program. (ESD) + + + VFDFB: Speed Indication Feedback from Device + + + Scale Output to a 4,000-20,000 (4-20mA) signal. +Formula Assumes the following Values: +Raw Max is 20,000 +Raw Min is 4,000 +VFD is scaled as a Hz and not as Percentage + +(((20000-4000)*VFDScale)/60)+4000 + + + VFDSP - ( DBND * VFDMax SP) + 100 * 2 + + + If the Setpoint to be scaled is greater than the Max allowed setpoint, move max setpoint into output to be scaled + + + MN: +Device Running Status + + + STTD: Count of Starts Today + + + Mintes + + + Month + + + VFDOut: +Output to Physical Device + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared. + + + VFDMaxSP: VFD Maximum Setpont + + + RTTotalMin: Run Time Minutes Since Last Reset. + + + Maximum Value of Deviation before Timer begins + + + This prescan routine is only exicuted before the first scan or on changes from program mode to run mode: + +Clear operator control bits + + + RTTotalMin: Run Time Minutes Since Last Reset. + + + VFDSP: VFD Speed Setpoint + + + Year + + + RTTotalHrs: Run Time Hours Total Since Last Reset. + + + Internal Start Command + + + VFDScale: VFD Output in EU to be Scaled + + + Clear operator control bits + + + Hours + + + if any one of the Annunciate bits are on, set the general GenAnnunciate bit. + + + if any one of the Alarms are on, set the general GenAlarm bit + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared. + + + On the first scan that the current hour and minute is equal to the reset hour and minute (midnight): +Mov todays totals into yesterdays totals and clear todays totals + + + STTD: +Count of Starts Today + + + VFDSP: VFD Speed Setpoint + + + MTR.RSRM: Restart Delay Remaining seconds. + + + RTTotalMin: Run Time Minutes Since Last Reset. + + + Manual Stop Command from HMI. + + + Internal Stop Command + + + RTTodayMin: +Run Time Minutes Today. + + + If Manual is disabled, force into AUTO mode. + + + STTD: +Count of Starts Today + + + Day + + + RTYesterdayHrs: Run Time Hours Yesterday. + + + Hours + + + Minutes + + + RTTotalHrs: Run Time Hours Since Last Reset. + + + Deviation Timer Remaining in Seconds + + + RTTodayHrs: Run Time Hours Today/Current. + + + RTTotalHrs: Run Time Hours Total Since Last Reset. + + + RTTodayMin: Run Time Minutes Today. + + + Output run command if the motor should "Start" running. + + + RTYesterdayMin: Run Time Minutes Yesterday. + + + Suppress All Alarms. + + + Seconds + + + Hours + + + Year + + + Call the Alarm AOI for the Motor Failure + + + Tagged Out of Service. + + + Device is ready for auto control if it is in remote, in auto, not in alarm, not tagged out of service, and not interlocked. + + + Seconds + + + MTR.VFDOut: Output to Physical Device + + + Tagged Out of Service. + + + MN: +Device Running Status + + + If there is a PLC wide global reset, latch the local alarm reset so the global reset has the same effect as the local reset. + + + Determine which Alarm has the Highest Priority when any alarm is active. +This is to determine which icon to display on HMI. + + + Auto Enable: +Set to 1 if there is an auto routine. Used to Hide or show Auto Display on HMI. + + + STTD: +Count of Starts Today + + + Motor Runtime Accumulator Logic. +The timer accumulator in units of milliseconds up to 1 minute. + + + Shelve All Alarms. + + + Device Running Status + + + STTD: +Count of Starts Today. + + + MTR.VFDSPReqPLC: VFD Speed Setpoint from PLC + + + MN: +Device Running Status + + + VFDOut: Output to Physical Device + + + When the one minute timer is done: +Reset the timer. +Add one to todays run time minutes. +If todays runtime minutes goes over 59, add one to todays run time hours and clear the minutes. +Add one to the total run time minutes. +If the total runtime minutes goes over 59, add one to the total run time hours and clear the minutes. + + + Fail To Stop Alarm Time Remaining + + + RTTodayHrs: Run Time Hours Today/Current. + + + RTTodayMin: Run Time Minutes Today. + + + Internal Run State +1 = Motor Should be running +0 = Motor should be stopped + + + Reset Motor Run Timer Accumulation to 0. + + + VFDScale: VFD Output in EU to be Scaled + + + Reset Runtime Command from HMI. + + + Year + + + VFDScale: VFD Output in EU to be Scaled + + + Minutes + + + RTYesterdayHrs: +Run Time Hours Yesterday. + + + Call the Alarm AOI for the IO PLC Fault + + + Count of Starts Today. +Total Count of Device Starts since last starts reset. + + + VFDMaxSP: VFD Maximum Setpont + + + If the Setpoint to be scaled is less than the min allowed setpoint, move min setpoint into output to be scaled + + + Seconds + + + VFDScale: VFD Output in EU to be Scaled + + + VFDSPReqPLC: VFD Speed Setpoint from PLC + + + Month + + + Detect Motor failure from examining the command compared to the feedback. +Motor Fail input blocks the fail to start alarm to keep alarms focused on the primary issue (motor fault) + + + Reset: Command from HMI to Reset all alarms on this device. + + + RTTodayMin: Run Time Minutes Today. + + + Un-Suppress All Alarms. + + + VFDSP: VFD Speed Setpoint + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared. + + + If Auto is disabled, force into manual mode. + + + Minimum Value of Deviation before Timer begins + + + Manual Stop Command from HMI. + + + Reset Count of Starts Command from HMI + + + STRS: Total Count of Device Starts Since last starts reset. + + + Device is ready for auto control. + + + RTTotalMin: Run Time Minutes Since Last Reset. + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Map items to DDT + + + This timer is used to allow a 1 second delay to capture the accumulated time when the motor stops. + + + HzEnable: +1 = VFD using Hz (0-60 Hz) +0 = VFD using Percentages (0-100%) + + + STYD: +Count of Starts Yesterday. + + + STRS: +Total Count of Device Starts since last starts reset + + + Inhibit Timer Preset + + + Monitor a STOP request for the present state to set the INTERNAL STOP +PC_MAN and PC_AUTO Stops have effect if in remote (or remote is disabled) +If remote is enabled and in local, monitor motor stop to support bumpless transfer to remote. + + + Scale Output to a 4,000-20,000 (4-20mA) signal. +Formula Assumes the following Values: +Raw Max is 20,000 +Raw Min is 4,000 +VFD is scaled as a Percentage and not as Hz + +(((20000-4000)*VFDScale)/100)+4000 + + + Inhibit Motor restart. + + + If in Auto, move Auto Device Speed into VFD Output to be Scaled + + + If in Manual, move Operator Setpoint into VFD Output to be Scaled + + + RTTodayHrs: Run Time Hours Today/Current. + + + Un-Shelve All Alarms. + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + Set by HMI +0 = Device in Manual +1 = Device in Auto + + + Move a 0 into the Inhibit Timer to Finish the timer on First Scan. + + + Motor Failure Alarm Time Remaining + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared. + + + Restart Delay Remaining: in Seconds. + + + Month + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared + + + HzEnable: +1 = VFD using Hz (0-60 Hz) +0 = VFD using Percentages (0-100%) + + + RSRM: Restart Delay Remaining seconds. + + + RTYesterdayMin: +Run Time Minutes Yesterday. + + + Remote: +1= Device in Remote +0= Device in Local + + + Fail To Start Alarm Time Remaining + + + Motor Run Time Accumulation. +This is used to capture the seconds when motor stops and keep that total to correctly count to a minute. + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + VFDSPReqPLC: VFD Speed Setpoint from PLLC + + + Reset: Command from HMI to Reset all alarms on this device. + + + RTTotalMin: Run Time Minutes Since Last Reset. + + + Call the Alarm AOI for the Deviaiton Alarm + + + Set commmon fail and LOCKOUT a motor in the event of a failure + + + Display time remaining before Deviation Fault Alarm + + + Minutes + + + RTTodayHrs: +Run Time Hours Today/Current. + + + Set by HMI +1= Device in Auto +0= Device in Manual + + + Hours + + + ManDisable: +1 = Manual Mode Disabled, Always in Auto +0 = Operator may run device in Auto or Manual + + + MTR.ATRM: Alarm Time Remaining: Seconds Until Alarm Trips if Fault is not Cleared. + + + Reset Runtime Command from HMI. + + + VFDMinSP: VFD Minimum Setpont + + + MTR.VFDFB: Speed Indication Feedback from Device + + + If feedback is outside setpoint deband, active deviation fault. +Deadband is total range from over to under and scaled as percentage. + +VFDSP + ( DBND * VFDMaxSP) + 100 * 2 + + + Move Alarm Notify # to 0 if no Alarms are active. + + + Locked by program. (ESD) + + + STRS: Total Count of Device Starts since last starts reset. + + + Manual Start Command from HMI. + + + VFDOut: +Output to Physical Device + + + Reset Runtime Command from HMI + + + Manual Start Command from HMI. + + + Day + + + On start request, latch the internal run bit and hold until stop request or motor failure. + + + One Shot for New Day + + + Start, Stop, or Motor Failure + + + if any one of the aknowledged bits are on, set the GenAlarmAcked bit + + + VFDSP: VFD Speed Setpoint + + + Find the shortest alarm time remaining: +Start by setting alarm time remaining very high. +Then for each alarm, if its fault is active and its time remaining is less than the current value of alarm time remaining, then set its time remaining as the overall alarm time remaining. + + + Deviation Fault is active, this is not the delayed alarm. + + + RTTodayHrs: +Run Time Hours Today / Current + + + MN: +Device Running Status + + + Global Reset: +Used to reset all alarms in this DFB + + + + + + + + DDT for MTR VFD Ladder DFB: Motor with Variable Speed Motor, No Strings + + + + First Integer of packed Bits + + + Start Command from HMI + + + + Stop Command from HMI + + + + True indicates blue flag should be displayed. + + + + Start fault is active, this is not the delayed alarm + + + + Stop fault is active, this is not the delayed alarm + + + + Reset: Command from HMI to Reset all alarms on this device. + + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + + Remote: 1 = Device In Remote 0 = Device In Local + + + + Device Running Status + + + + Motor Fail Status from Motor Controller + + + + 1 remote/local input wired 0 = not wired + + + + Set to 1 if there is an auto routine. Used to hide or show Auto display on HMI + + + + 1 = VFD using Hz (0-60 Hz) 0 = VFD using Percentages (0-100%) + + + + 1 = Manual Mode Disabled, Always in Auto 0 = Operator may run device in Auto or Manual + + + + Used to reset all alarms in the DFB + + + + Set by HMI 0 = Device in Manual 1 Device in Auto + + + + Second Integer of packed Bits + + + Locked by program (ESD) + + + + Tagged Out of Service + + + + Auto Start from Auto Logic + + + + Auto Stop from Auto Logic + + + + Reset Runtime Command from HMI + + + + Reset Count of Starts Command from HMI + + + + Device Failed to Start + + + + Device Failed to Stop + + + + General Failure Alarm from Motor Drive + + + + At least one alarm on this device is active. + + + + Acknowledged: At least one alarm has been acknowledged. + + + + At least one alarm in Device is annunciating (flash the device symbol) + + + + All Alarms can be reset + + + + Fail to Start, Fail to Stop or Motor Failure alarm is active + + + + Device Run Command + + + + Device is ready for auto control + + + + Third Integer of packed Bits + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + General Alarm Shelved State + + + + General Alarm Suppressed State + + + + Deviation Alarm from Logic + + + + Deviation fault is active, this is not the delayed alarm + + + + Shelve Command from HMI + + + + Suppress Command from HMI + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Fourth Integer of packed Bits (SPARE) + + + Spare Integer + + + Spare Integer + + + Run Time Hours Today/Current + + + Run Time Minutes Today + + + Run Time Hours Total Since Last Reset + + + Run Time Minutes Since Last Reset + + + Run Time Hours Yesterday + + + Run Time Minutes Yesterday + + + Total Count of Device Starts since last starts reset + + + Count of Starts Today + + + Count of Starts Yesterday + + + Time the runtime was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + Time the starts counts was last reset + + Year + + + Month + + + Day + + + Hours + + + Minutes + + + Seconds + + + + Date Last Run for HMI display + + Month + + + Day + + + Year + + + Hours + + + Minutes + + + Seconds + + + + Restart Delay: Seconds to inhibit motor start after motor stops + + + Restart Delay Remaining: in seconds + + + Alarm Time Remaining: Seconds Until Alarm Trips If Fault is not Cleared + + + Output to Physical Device + + + Fail to Start Alarm DDT + + + Fail to Sop Alarm DDT + + + Motor Failure Alarm DDT + + + PLC Fault Alarm DDT + + + Speed Deviation Alarm DDT + + + Faceplate Display Index + + + Maximum Value of Deviation before Timer begins + + + Minimum Value of Deviation before Timer begins + + + Deviation Timer Remain in Seconds + + + VFD Output in EU to be Scaled + + + Speed Indication Feedback from Device + + + VFD MAX SPEED SETPOINT + + + VFD MIN SPEED SETPOINT + + + VFD Speed Setpoint + + + Deadband for Deviation Timer + + + VFD Speed Request from PLC + + + Combined Alarm Value Notification for HMI + + + + + DDT for DI Ladder DFB: Digital input fault routing - ladder based, No Strings + + + + First integer of packed bits + + + Input tag to monitor for alarm + + + + Input is in fault + + + + Input value signifying alarm + + + + Fault Is In Alarm (on longer than the delay) + + + + 0 = enable alarm + + + + Reset Alarm + + + + Acknowledge Alarm + + + + Maintenance Command to Enable Alarm + + + + Maintenance Command to Disable Alarm + + + + At Least One Alarm is Active + + + + At Least One Alarm is Annunciating + + + + At Least One Alarm is Acknowledged + + + + At least one alarm is latched and all latched alarms are resetable + + + + Shelve Command from HMI + + + + Suppress Command from HMI + + + + + + + Second integer of packed bits + + + Reset all Alarms On this PLC + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + Alarm is in fault + + + + Shelved Status + + + + Suppressed Status + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Set if any of the I/O modules associated with the monitoring or control of the equipment has faulted. + + + + Tagged Out of Service + + + + Spare Third integer of packed bits. + + + Spare Fourth integer of packed bits. + + + Spare Integer + + + Spare Integer + + + ddt_Alarm for handling alarms + + + PLC Fault Alarm DDT + + + Alarm Time Remaining + + + Combined Alarm Value Notification for HMI + + + + + Digital input fault routing - ladder based + + + + + Input tag to monitor for alarm + + + + Input value signifying alarm + + + + Device IO Fault + + + + + + Global Reset from Logic + + + + Suppress Alarm from Program Control + + + + UnSuppress Alarm from Program Control + + + + Unshelve Alarm from Program Control + + + + DDT for use with dfb_Alarm + + + + + + 1 = In Alarm + + + + Annunciate Alarm + + + + Alarm has been Acknowledged + + + + Alarm is latched but can be reset because condition is cleared. + + + + Fault Is In Alarm (on longer than the delay) + + + + Alarm Time Remaining: Seconds Remaining Until Alarm is Tripped + + + + + + dfb_Alarm for handling alarms + + + Alarm is in fault + + + PLC IO Fault Alarm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + if any one of the Annunciate bits are on, set the general GenAnnunciate bit. + + + Acknowledge Command from Logic to Acknowledge All Alarms in this DFB + + + Move Alarm Notify # to 0 if no Alarms are active. + + + Map items from DDT + + + Map items to DDT + + + Set all Alarm DFB's Shelve Duration Time. The HMI is using "DI_L.Alarm" for the initial Shelve Duration. + + + DI ALARM + If the input is on, activate the alarm if it is enabled + + + Input value signifying alarm + + + if any one of the Alarms are on, set the general GenAlarm bit + + + dfb_DI_L +Ladder based discrete alarm handling with messages. + +Deterimine if input is in fault. + + + Input tag to monitor for alarm + + + if any one of the aknowledged bits are on, set the GenAlarmAcked bit + + + When the Shelve Timer is Done Un-Latch the Shelve Command from HMI. + + + if in alarm and all alarms in the alarm array are either not in alarm or resetable, then the overall device is resetable. + + + Discrete input condition indicating a faulted state + + + 0= enable alarm + + + + + + + + Equipment Accum. Runtime In Hours and Tenth Of Hours DFB + + + + + + + Device Running feedback + + + + Accumulated Runtime reset + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Total Runtime in Min + + + Total Runtime Hours + + + Comvert Runtime in Hours + + + Reset every hour + + + Calculate Runtime in hours and tenth of hours + + + Total Runtime more than 32766 Hours holder + + + Total Runtime in Second + + + Reset every 60 Seconds + + + + + + + + Converts HMI Timer Setpoints to TIMER inputs and outputs.Returns count down time. + + + + + + + + 1000 is seconds, + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Takes a INT timer set point from the HMI and uses the multiplier to convert to a Pre-Time TIME. It subtracts the Elapsed time from the Pre-time and outputs a INT to show the time counting down on the HMI. + + + + + + + + Flow Totalizer with Discrete Input for counting + + + + + Discrete Input pulse from flow meter + + + + HMI Command to Reset Flow Totals + + + + + + System Time + + + + + + Today's Total Flow + + + + Yesterday's Total Flow + + + + Total Flow Since Last Reset + + + + + + Used to roll today's total to yesterday's and reset today's + + + FQ Counter is done + + + Flow Total (DINT) + + + Flow Total Today (DINT) + + + Flow Total Yesterday (DINT) + + + + + Internal Flow Totalizer Reset + + + One shot used to Roll Totals + + + Counter used to total the resetable total + + + Counter used to total todays total + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Roll todays total to yesterdays total + + + Determine if a Day Roll Over will take place this scan + + + Latch Flow Totalizer Reset Bit From HMI + + + Count pulses for resettable total + + + Convert DINTs to REALS for SCADA + + + Count pulses for today's total + + + + + + + + Enhanced Device DDT for embedded M580 DTM (with standalone PLC) + + + + + + + + + CRA health (Drop 1 to 31) + + + + + + Reserved + + + + + + Health bits for CRA Safe Task objects + + + + + + Health for DIO (New field name) + + + + + + CIMR/CIDR Object health bits + + + + + + Ethernet status + + + + + Link up/down for Ethernet port 1 + + + + + + Link up/down for Ethernet port 2 + + + + + + Link up/down for Ethernet port 3 + + + + + + Link up/down for Ethernet backplane port + + + + + + Link up/down for HSBY port + + + + + + + Redundancy status / backup path available + + + + + + Scanner OK and scanning at least 1 equipment (if at least 1 equipment configured) + + + + + + 0: one or more services not operating normally / 1: all operational + + + + + + 1: No traffic overload detected / 0: Traffic overload detected (ex: broadcast storm). Check your network topology and configuration. + + + + + + One bit for each user-observable feature + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + Main IP address status (0 in case of duplicate IP or no IP assigned) + + + + + + Ethernet backplane hardware status (0: failure, 1: OK) + + + + + + Ethernet backplane error (0: error, 1: OK) + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + EIP adapter (server) service 0: service not operating normally / 1: service operating normally or disabled + + + + + + One bit for each user-observable feature + + + + + IP address A/B status (0 in case of duplicate IP or no IP assigned) + + + + + + LLDP service status + + + + + + 0: event log service not operating normally / 1: event log service operating normally or disabled + + + + + + 1: No acknowledgement received from the syslog server / 0: otherwise + + + + + + Ethernet port 1 and 2 status + + + + + Ethernet port 3 and backplane port status + + + + + % of FDR server usage + + + + + Reserved + + + + + + Reserved + + + + + + Number of packets received on interface + + + + + Number of inbound packets that contain errors + + + + + Number of packets sent on interface + + + + + Number of outbound packets that contain errors + + + + + Signature of all files on local module FDR Server + + + + + DROP health bits (Drop 1 to 31) + + + + + Reserved + + + + + + RIO health bits (1 bit per RIO up to 128) + + + + + Local Slave health bits (Local Slave 1 to 3) + + + + + DIO health bits (1 bit per DIO up to 128 DIOs) + + + + + DIO device health (1 bit per DIO up to 128 DIO) + + + + + + DROP control bits (Drop 1 to 31) + + + Reserved + + + + RIO control bits (1 bit per RIO up to 128) + + + DIO control bits (1 bit per DIO up to 128 DIOs) + + + + + Device DDT For BME NOC Factory Cast + + + + + + + + + Ethernet status + + + + + Link up/down for Ethernet port 1 + + + + + + Link up/down for Ethernet port 2 + + + + + + Link up/down for Ethernet port 3 + + + + + + Link up/down for Ethernet backplane port + + + + + + Link up/down for HSBY port + + + + + + + Redundancy status / backup path available + + + + + + + Scanner OK and scanning at least 1 equipment (if at least 1 equipment configured) + + + + + + 0: one or more services not operating normally / 1: all operational + + + + + + 1: No traffic overload detected / 0: Traffic overload detected (ex: broadcast storm). Check your network topology and configuration. + + + + + + One bit for each user-observable feature + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + Main IP address status (0 in case of duplicate IP or no IP assigned) + + + + + + Ethernet backplane hardware status (0: failure, 1: OK) + + + + + + + Ethernet backplane error (0: error, 1: OK) + + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + 0: service not operating normally / 1: service operating normally or disabled + + + + + + EIP adapter (server) service 0: service not operating normally / 1: service operating normally or disabled + + + + + + One bit for each user-observable feature + + + + + IP address A/B status (0 in case of duplicate IP or no IP assigned) + + + + + + + LLDP service status + + + + + + 0: event log service not operating normally / 1: event log service operating normally or disabled + + + + + + 1: No acknowledgement received from the syslog server / 0: otherwise + + + + + + Ethernet port 1 and 2 status + + + + + Ethernet port 3 and backplane port status + + + + + MSB=Major Revision, LSB=Minor Revision + + + + + % of FDR server usage + + + + + Hidden - Reserved + + + + + + Number of packets received on interface + + + + + Number of inbound packets that contain errors + + + + + Number of packets sent on interface + + + + + Number of outbound packets that contain errors + + + + + Signature of all files on local module FDR Server + + + + + Health for DIO Objects + + + + + + Local Slave health bits (Local Slave 1 to 16) + + + + + DIO health bits (1 bit per DIO up to 128 DIOs. 112 - 127 are reserved for future extension) + + + + + DIO device health (1 bit per DIO up to 128 DIO) + + + + + + DIO control bits (1 bit per DIO up to 128 DIOs. 112 - 127 are reserved for future extension) + + + Reserved + + + + + + + + Health of Distributed IO Objects + + + + + + Device Connection health bits 2 to 17 + + + + + Device Connection health bits 18 to 33 + + + + + Device Connection health bits 34 to 49 + + + + + Device Connection health bits 50 to 65 + + + + + Device Connection health bits 66 to 81 + + + + + Device Connection health bits 82 to 97 + + + + + Device Connection health bits 98 to 113 + + + + + Device Connection health bits 114 to 129 + + + + + Device Connection health bits 130 to 145 + + + + + Device Connection health bits 146 to 161 + + + + + Device Connection health bits 162 to 511 + + + + + Device Connection health bits 178 to 193 + + + + + Device Connection health bits 194 to 209 + + + + + Device Connection health bits 210 to 225 + + + + + Device Connection health bits 226 to 241 + + + + + Device Connection health bits 242 to 257 + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Freshness of Object + + + + + Freshness of Object + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + + + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + + + + + Unused Variable + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Output Variables + + + + + + + + + + + + + + + + + + + + + + + + + + Device DDT For BME NOC Non Factory Cast + + + + + + + + + Global Freshness + + + + + Freshness of Object + + + + + Reserved + + + + + + Input Variables + + + + + + + + + + Unused Variable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Unused Variable + + + + + + diff --git a/formats/ftae/FTAE_Alarm_Export.xslt b/formats/ftae/FTAE_Alarm_Export.xslt new file mode 100644 index 0000000..a81b0d2 --- /dev/null +++ b/formats/ftae/FTAE_Alarm_Export.xslt @@ -0,0 +1,2734 @@ + + + + + + + + + + Rockwell Software + Rockwell Software + 2006-04-06T18:34:03Z + 2006-04-06T18:34:04Z + Rockwell Software + 10.6735 + + + + + + + 9975 + 15195 + 0 + 15 + False + False + + + + + + + + + + + Name + + + + Input Tag + + + + Ack Required + + + + Latched + + + + Condition + + + + Min Duration + + + + Severity + + + + Message ID + + + + Alarm as a Tag + + + + User Data + + + + Alarm Class + + + + FactoryTalk View Command + + + + Data Tag1 + + + + Data Tag2 + + + + Data Tag3 + + + + Data Tag4 + + + + Disabled Tag + + + + Suppressed Tag + + + + In Alarm Tag + + + + Acknowledged Tag + + + + Remote AcknowledgeAll Reset + + + + Remote AcknowledgeAll Tag + + + + Shelve Tag + + + + Remote Disable Reset + + + + Remote Disable Tag + + + + Remote Enable Reset + + + + Remote Enable Tag + + + + Remote Suppress Reset + + + + Remote Suppress Tag + + + + Remote Unsuppress Reset + + + + Remote Unsuppress Tag + + + + Remote ShelveAll Reset + + + + Remote ShelveAll Tag + + + + Remote ShelveDuration Tag + + + + Remote Unshelve Reset + + + + Remote Unshelve Tag + + + + Group ID + + + + + + + + + 300 + 300 + + + False + False + + + + Digital + + 37 + + 1 + 1 + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + Boolean + + + 1 + + + 0 + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + + + + + + Name + + + + Input Tag + + + + Ack Required + + + + + Min Duration + + + + Deadband + + + + HIHI Enabled + + + + HIHI Limit Type + + + + HIHI Limit + + + + HIHI Severity + + + + HIHI Message ID + + + + HI Enabled + + + + HI Limit Type + + + + HI Limit + + + + HI Severity + + + + HI Message ID + + + + LO Enabled + + + + LO Limit Type + + + + LO Limit + + + + LO Severity + + + + LO Message ID + + + + LOLO Enabled + + + + LOLO Limit Type + + + + LOLO Limit + + + + LOLO Severity + + + + LOLO Message ID + + + + Alarm as a Tag + + + + User Data + + + + Alarm Class + + + + FactoryTalk View Command + + + + Data Tag1 + + + + Data Tag2 + + + + Data Tag3 + + + + Data Tag4 + + + + Disabled Tag + + + + Suppressed Tag + + + + HIHI In Alarm Tag + + + + HIHI Acknowledged Tag + + + + HI In Alarm Tag + + + + HI Acknowledged Tag + + + + LO In Alarm Tag + + + + LO Acknowledged Tag + + + + LOLO In Alarm Tag + + + + LOLO Acknowledged Tag + + + + + Remote AcknowledgeAll Reset + + + + Remote AcknowledgeAll Tag + + + + Remote HIHI Acknowledge Reset + + + + Remote HIHI Acknowledge Tag + + + + Remote HI Acknowledge Reset + + + + Remote HI Acknowledge Tag + + + + Remote LO Acknowledge Reset + + + + Remote LO Acknowledge Tag + + + + Remote LOLO Acknowledge Reset + + + + Remote LOLO Acknowledge Tag + + + + HIHI Apply Duration + + + + HI Apply Duration + + + + LO Apply Duration + + + + LOLO Apply Duration + + + + HIHI Shelve Tag + + + + HI Shelve Tag + + + + LO Shelve Tag + + + + LOLO Shelve Tag + + + + Remote Disable Reset + + + + Remote Disable Tag + + + + Remote Enable Reset + + + + Remote Enable Tag + + + + Remote Suppress Reset + + + + Remote Suppress Tag + + + + Remote Unsuppress Reset + + + + Remote Unsuppress Tag + + + + Remote ShelveAll Reset + + + + Remote ShelveAll Tag + + + + Remote HIHI Shelve Reset + + + + Remote HIHI Shelve Tag + + + + Remote HI Shelve Reset + + + + Remote HI Shelve Tag + + + + Remote LO Shelve Reset + + + + Remote LO Shelve Tag + + + + Remote LOLO Shelve Reset + + + + Remote LOLO Shelve Tag + + + + Remote ShelveDuration Tag + + + + Remote Unshelve Reset + + + + Remote Unshelve Tag + + + + Group ID + + + + + + + False + False + + + + Level + + 83 + + 1 + 1 + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + + String + + + + + + String + + + + + + 6 + + + Boolean + + + 1 + + + + + + + 7 + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + 11 + + Boolean + + + 1 + + + + + + + 12 + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + + 16 + + Boolean + + + 1 + + + + + + 17 + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + 21 + + Boolean + + + 1 + + + + + + 22 + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + Boolean + + + 1 + + + 0 + + + + + + + Boolean + + + 1 + + + 0 + + + + + + + Boolean + + + 1 + + + 0 + + + + + + + Boolean + + + 1 + + + 0 + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + + + + + + Name + + + + Input Tag + + + + Ack Required + + + + + Target Type + + + + Target Value + + + + Deadband + + + + Deviation Value + + + + Condition + + + + Min Duration + + + + Severity + + + + Message ID + + + + Alarm as a Tag + + + + User Data + + + + Alarm Class + + + + FactoryTalk View Command + + + + Data Tag1 + + + + Data Tag2 + + + + Data Tag3 + + + + Data Tag4 + + + + Disabled Tag + + + + Suppressed Tag + + + + Dev High In Alarm Tag + + + + Dev Low In Alarm Tag + + + + Dev High Acknowledged Tag + + + + Dev Low Acknowledged Tag + + + + Remote AcknowledgeAll Reset + + + + Remote AcknowledgeAll Tag + + + + Remote High Acknowledge Reset + + + + Remote High Acknowledge Tag + + + + Remote Low Acknowledge Reset + + + + Remote Low Acknowledge Tag + + + + Dev High Shelve Tag + + + + Dev Low Shelve Tag + + + + Remote Disable Reset + + + + Remote Disable Tag + + + + Remote Enable Reset + + + + Remote Enable Tag + + + + Remote Suppress Reset + + + + Remote Suppress Tag + + + + Remote Unsuppress Reset + + + + Remote Unsuppress Tag + + + + Remote ShelveAll Reset + + + + Remote ShelveAll Tag + + + + Remote High Shelve Reset + + + + Remote High Shelve Tag + + + + Remote Low Shelve Reset + + + + Remote Low Shelve Tag + + + + Remote ShelveDuration Tag + + + + Remote Unshelve Reset + + + + Remote Unshelve Tag + + + + Group ID + + + + + + + False + False + + + + Deviation + + 51 + + 1 + 1 + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + Boolean + + + 1 + + + 0 + + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + String + + + + + + String + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + Boolean + + + + 1 + + + 0 + + + + + + + + String + + + + + + + + String + + + + + + + + + + + + False + False + + + + Messages + + + + 1 + 1 + + s21 + + + String + ID + + + ID + + + + + + String + + + + + + + + + + String + + + + + + + String + + + + + + + + + + + + + 0.10 Seconds + + + + 0.25 Seconds + + + + 0.50 Seconds + + + + 1 Seconds + + + + 2 Seconds + + + + 5 Seconds + + + + 10 Seconds + + + + 20 Seconds + + + + 30 Seconds + + + + 60 Seconds + + + + 120 Seconds + + + + + + + False + False + + + + Tag Update Rates + + 11 + + 1 + 1 + + + + + + + + + + + + + + + + + + + 1 + + String + + + + + + + 2 + + String + + + + + + + 3 + + String + + + + + + + 4 + + String + + + + + + + 5 + + String + + + + + + + 6 + + String + + + + + + + 7 + + String + + + + + + + 8 + + String + + + + + + + 9 + + String + + + + + + + 10 + + String + + + + + + + 11 + + String + + + + + + + + + + + + + + + + + + Max Shelve Value + + + + + + + False + False + + + + Global Configuration + + 1 + 2 + 1 + 1 + + + + + String + + + + + + + + + + + ID + + + + Name + + + + Parent ID + + + + + + + False + False + + + + + Groups + + + + 3 + + + + + + 1 + + + 1 + + + + + + + + String + + + + + + + + String + + + + + + + + String + + + + + + + + + + + + diff --git a/readme.md b/readme.md index 9d27cef..625e3be 100644 --- a/readme.md +++ b/readme.md @@ -6,10 +6,10 @@ with a GUI application possibly to come later. ## Planned formats (non-exhaustive): - PLC variable export: - - Schneider Electric ControlExpert .xsy - - Allen-Bradley CSV + - Schneider Electric ControlExpert .xsy + - Allen-Bradley CSV - HMI/SCADA databases: - - Kepserver EX/Enterprise CSV - - FactoryTalk View SE Alarm Database XLS and/or XML - - PI Historian XLSX \ No newline at end of file + - Kepserver EX/Enterprise CSV + - FactoryTalk View SE Alarm Database XLS and/or XML + - PI Historian XLSX \ No newline at end of file