Files

1070 lines
45 KiB
XML

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!--
Definitions for the data types that are built in to ControlExpert and not
normally included in XSY exports.
Created | 2020-11-09 | Josh Lucas | Prime Controls
Copyright 2026 Prime Controls. All rights reserved.
-->
<VariablesExchangeFile>
<fileHeader
company="Schneider Automation"
product="Control Expert V14.0 - 190112"
dateTime="date_and_time#2020-4-3-15:39:1"
content="Variable source file"
DTDVersion="41"
></fileHeader>
<DDTSource DDTName="PARA_PI_B">
<comment>Parameters for PI_B function block</comment>
<structure>
<variables name="id" typeName="UINT">
<comment>Reserved for autotuning</comment>
</variables>
<variables name="pv_inf" typeName="REAL">
<comment>Lower limit of the process value range</comment>
</variables>
<variables name="pv_sup" typeName="REAL">
<comment>Upper limit of the process value range</comment>
</variables>
<variables name="out_inf" typeName="REAL">
<comment>Lower limit of the output value range</comment>
</variables>
<variables name="out_sup" typeName="REAL">
<comment>Upper limit of the output value range</comment>
</variables>
<variables name="rev_dir" typeName="BOOL">
<comment>0: direct action of the PID controller 1: opposite action of the PID controller</comment>
<attribute name="ExtractBit" value="0"></attribute>
</variables>
<variables name="en_rcpy" typeName="BOOL">
<comment>1: the RCPY input is used</comment>
<attribute name="ExtractBit" value="8"></attribute>
</variables>
<variables name="kp" typeName="REAL">
<comment>Proportional contribution (gain)</comment>
</variables>
<variables name="ti" typeName="TIME">
<comment>Integral time</comment>
</variables>
<variables name="dband" typeName="REAL">
<comment>Dead zone on deviation</comment>
</variables>
<variables name="outbias" typeName="REAL">
<comment>Manual adjustment of static deviation</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_VALUE_IN">
<comment></comment>
<structure>
<variables name="VALUE" typeName="INT">
<comment>Analog input value</comment>
</variables>
<variables name="FORCED_VALUE" typeName="INT">
<comment>Forced value</comment>
</variables>
<variables name="FORCE_CMD" typeName="BOOL">
<comment>Force command</comment>
</variables>
<variables name="FORCED_STATE" typeName="BOOL">
<comment>Forced state</comment>
</variables>
<variables name="TRUE_VALUE" typeName="BOOL">
<comment>Physical value</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_CH_IN">
<comment></comment>
<structure>
<variables name="FCT_TYPE" typeName="WORD">
<comment>Function type</comment>
</variables>
<variables name="CH_HEALTH" typeName="BOOL">
<comment>Channel health</comment>
</variables>
<variables name="CH_WARNING" typeName="BOOL">
<comment>Channel warning</comment>
</variables>
<variables name="ANA" typeName="T_U_ANA_VALUE_IN">
<comment></comment>
</variables>
<variables name="MEASURE_STS" typeName="INT">
<comment>Measurement status word</comment>
</variables>
<variables name="CH_ALIGNED" typeName="BOOL">
<comment>Aligned channel</comment>
<attribute name="ExtractBit" value="0"></attribute>
</variables>
<variables name="LOWER_LIMIT" typeName="BOOL">
<comment>Measurement within lower tolerance zone</comment>
<attribute name="ExtractBit" value="5"></attribute>
</variables>
<variables name="UPPER_LIMIT" typeName="BOOL">
<comment>Measurement within upper tolerance zone</comment>
<attribute name="ExtractBit" value="6"></attribute>
</variables>
<variables name="INT_OFFSET_ERROR" typeName="BOOL">
<comment>Internal offset error</comment>
<attribute name="ExtractBit" value="8"></attribute>
</variables>
<variables name="INT_REF_ERROR" typeName="BOOL">
<comment>Internal reference error</comment>
<attribute name="ExtractBit" value="10"></attribute>
</variables>
<variables name="POWER_SUP_ERROR" typeName="BOOL">
<comment>Power supply error</comment>
<attribute name="ExtractBit" value="11"></attribute>
</variables>
<variables name="SPI_COM_ERROR" typeName="BOOL">
<comment>SPI communication error</comment>
<attribute name="ExtractBit" value="12"></attribute>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_IN_4">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_IN" typeName="ARRAY[0..3] of T_U_ANA_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_IN_8">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_IN" typeName="ARRAY[0..7] of T_U_ANA_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_IN_16">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_IN" typeName="ARRAY[0..15] of T_U_ANA_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_VALUE_OUT">
<comment></comment>
<structure>
<variables name="VALUE" typeName="INT">
<comment>Analog output value</comment>
</variables>
<variables name="FORCED_VALUE" typeName="INT">
<comment>Forced Value</comment>
</variables>
<variables name="FORCE_CMD" typeName="BOOL">
<comment>Force command</comment>
</variables>
<variables name="FORCED_STATE" typeName="BOOL">
<comment>Forced state</comment>
</variables>
<variables name="TRUE_VALUE" typeName="INT">
<comment>Physical value</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_CH_OUT">
<comment></comment>
<structure>
<variables name="FCT_TYPE" typeName="WORD">
<comment>Function type</comment>
</variables>
<variables name="CH_HEALTH" typeName="BOOL">
<comment>Channel health</comment>
</variables>
<variables name="ANA" typeName="T_U_ANA_VALUE_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_OUT_2">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_OUT" typeName="ARRAY[0..1] of T_U_ANA_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_OUT_4">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_OUT" typeName="ARRAY[0..3] of T_U_ANA_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_ANA_STD_OUT_8">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="ANA_CH_OUT" typeName="ARRAY[0..7] of T_U_ANA_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_CH_IN">
<comment></comment>
<structure>
<variables name="CH_HEALTH" typeName="BOOL">
<comment>Channel health</comment>
</variables>
<variables name="VALUE" typeName="EBOOL">
<comment>Discrete input value</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_IN_8">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_IN" typeName="ARRAY[0..7] of T_U_DIS_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_IN_16">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_IN" typeName="ARRAY[0..15] of T_U_DIS_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_IN_32">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_IN" typeName="ARRAY[0..31] of T_U_DIS_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_IN_64">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_IN" typeName="ARRAY[0..63] of T_U_DIS_STD_CH_IN">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_CH_OUT">
<comment></comment>
<structure>
<variables name="CH_HEALTH" typeName="BOOL">
<comment>Channel health</comment>
</variables>
<variables name="VALUE" typeName="EBOOL">
<comment>Discrete output value</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_OUT_8">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_OUT" typeName="ARRAY[0..7] of T_U_DIS_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_OUT_16">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_OUT" typeName="ARRAY[0..15] of T_U_DIS_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_OUT_32">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_OUT" typeName="ARRAY[0..31] of T_U_DIS_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_U_DIS_STD_OUT_64">
<comment></comment>
<structure>
<variables name="MOD_HEALTH" typeName="BOOL">
<comment>Module health</comment>
</variables>
<variables name="MOD_FLT" typeName="BYTE">
<comment>Module faults</comment>
</variables>
<variables name="DIS_CH_OUT" typeName="ARRAY[0..63] of T_U_DIS_STD_CH_OUT">
<comment></comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_DIS_IN_GEN">
<comment></comment>
<structure>
<variables name="CH_ERROR" typeName="BOOL">
<comment>Channel error</comment>
</variables>
<variables name="VALUE" typeName="EBOOL">
<comment>Discrete input value</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="Para_RAMP">
<structure>
<variables name="inc_rate" typeName="REAL">
</variables>
<variables name="dec_rate" typeName="REAL">
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="ADDM_TYPE">
<structure>
<variables name="array" typeName="ARRAY [0..7] of INT">
<comment>Common array for communication EF Mid-Range</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="ADDMX_TYPE">
<structure>
<variables name="array" typeName="ARRAY [0..15] of INT">
<comment>Common array for EIO communication function blocks</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="ADDR_TYPE">
<structure>
<variables name="array" typeName="ARRAY [0..5] of INT">
<comment>Common array for communication EF</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="MSTR_CTL_EXT">
<comment>Datatype extended for master control block MSTR_CTL</comment>
<structure>
<variables name="operation" typeName="UINT"></variables>
<comment>operation code</comment>
<variables name="status" typeName="UINT"></variables>
<comment>error status</comment>
<variables name="length" typeName="UINT"></variables>
<comment>number of data units transferred</comment>
<variables name="reference" typeName="UINT"></variables>
<comment>operation-dependent information</comment>
<variables name="route" typeName="ARRAY [0..4] of UINT"></variables>
<comment>routing address</comment>
<variables name="ext" typeName="ARRAY [1..5] of UINT"></variables>
<comment>operation-dependent information</comment>
</structure>
</DDTSource>
<DDTSource DDTName="WordArr5">
<structure>
<variables name="array" typeName="ARRAY [0..5] of WORD"></variables>
</structure>
</DDTSource>
<DDTSource DDTName="XMIT_SET">
<comment>Data structure for the XMIT configuration</comment>
<structure>
<variables name="BaudRate" typeName="INT">
<comment>Data Rate</comment>
</variables>
<variables name="DataBits" typeName="WORD">
<comment>Data bits</comment>
</variables>
<variables name="Parity" typeName="BOOL">
<comment>Parity</comment>
</variables>
<variables name="StopBits" typeName="WORD">
<comment>Stop bits</comment>
</variables>
<variables name="CommandWord" typeName="WORD">
<comment>Command word</comment>
</variables>
<variables name="MessageLen" typeName="INT">
<comment>Message Length</comment>
</variables>
<variables name="RetryLimit" typeName="INT">
<comment>Retry limit</comment>
</variables>
<variables name="XmStartDelay" typeName="INT">
<comment>Start of transmission delay (ms)</comment>
</variables>
<variables name="XmEndDelay" typeName="INT">
<comment>End of transmission delay (ms)</comment>
</variables>
<variables name="RespTimeOut" typeName="INT">
<comment>Response time-out (ms)</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_M_CRA_EXT_IN">
<structure>
<variables name="IO_HEALTH_RACK0" typeName="WORD">
<comment>Health bits of rack 0: slots 0 to 15</comment>
</variables>
<variables name="IO_HEALTH_RACK1" typeName="WORD">
<comment>Health bits of rack 1: slots 0 to 15</comment>
</variables>
<variables name="DEVICE_NAME" typeName="STRING[16]">
<comment>Device name of the CRA drop</comment>
</variables>
<variables name="VERSION" typeName="WORD">
<comment>Firmware version of the CRA</comment>
</variables>
<variables name="ROTARY_SWITCHES" typeName="BYTE">
<comment>Rotary switches value at power up</comment>
</variables>
<variables name="CRA_STATE" typeName="BYTE">
<comment>State of the CRA module</comment>
</variables>
<variables name="CRA_DIAGNOSTIC" typeName="WORD">
<comment>CRA diagnostic information</comment>
</variables>
<variables name="GLOBAL_IO_HEALTH" typeName="BOOL">
<comment>At least one IO error in drop when 0</comment>
</variables>
<variables name="CCOTF_IN_PROGRESS" typeName="BOOL">
<comment>CCOTF in progress</comment>
</variables>
<variables name="CCOTF_INVALID_CONF" typeName="BOOL">
<comment>CCOTF error</comment>
</variables>
<variables name="IOPL_MISMATCH" typeName="BOOL">
<comment>IOPL mismatch</comment>
</variables>
<variables name="SWITCH_CHANGE" typeName="BOOL">
<comment>Rotary switches have changed since last power up</comment>
</variables>
<variables name="DROP_COM_HEALTH" typeName="BOOL">
<comment>Drop communication health</comment>
</variables>
<variables name="REDUNDANT_POWER_SUPPLY_STATUS" typeName="BOOL">
<comment>Redundant power supply status</comment>
</variables>
<variables name="CYCLE_CURR_TIME" typeName="UINT">
<comment>Execution time of the last CRA cycle (unit: 0.01 ms)</comment>
</variables>
<variables name="CYCLE_MAX_TIME" typeName="UINT">
<comment>Longes CRA cycle execution time (unit: 0.01 ms)</comment>
</variables>
<variables name="CYCLE_MIN_TIME" typeName="UINT">
<comment>Shortest CRA cycle execution time (uint: 0.01 ms)</comment>
</variables>
<variables name="TIME_STAMP_RECORDS" typeName="UINT">
<comment>Number of time stamp records available in the drop local buffer</comment>
</variables>
<variables name="TS_DIAGNOSTIC_FLAGS" typeName="WORD">
<comment>Diagnostic information about the source time stamped events service</comment>
</variables>
<variables name="TIME_VALID" typeName="BOOL">
<comment>Time valid and synchronized</comment>
</variables>
<variables name="CLOCK_FAILURE" typeName="BOOL">
<comment>Clock failure</comment>
</variables>
<variables name="CLOCK_NOT_SYNC" typeName="BOOL">
<comment>Clock not synchronized</comment>
</variables>
<variables name="BUFF_FULL" typeName="BOOL">
<comment>Buffer full</comment>
</variables>
<variables name="TS_BUF_FILLED_PCTAGE" typeName="BYTE">
<comment>Percentage of the buffer filled [0..100]</comment>
</variables>
<variables name="TS_EVENTS_STATE" typeName="BYTE">
<comment>Main state of the TS events service</comment>
</variables>
<variables name="ETH_STATUS" typeName="BYTE">
<comment>Ethernet status</comment>
</variables>
<variables name="PORT1_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 1</comment>
</variables>
<variables name="PORT2_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 2</comment>
</variables>
<variables name="PORT3_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 3</comment>
</variables>
<variables name="ETH_BKP_PORT_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet backplane port</comment>
</variables>
<variables name="RPI_CHANGE" typeName="BOOL">
<comment>Ethernet/IP RPI change in progress</comment>
</variables>
<variables name="REDUNDANCY_OWNER" typeName="BOOL">
<comment>Redundant owner is present</comment>
</variables>
<variables name="GLOBAL_STATUS" typeName="BOOL">
<comment>0: one or more services not operating normally / 1: all operational</comment>
</variables>
<variables name="SERVICE_STATUS" typeName="BYTE">
<comment>One bit for each user-observable feature</comment>
</variables>
<variables name="RSTP_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="SNTP_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="PORT502_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="SNMP_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="ETH_BKP_FAILURE" typeName="BOOL">
<comment>Ethernet backplane status (0: failure, 1: OK)</comment>
</variables>
<variables name="ETH_BKP_ERROR" typeName="BOOL">
<comment>Ethernet backplane error (0: error, 1: OK)</comment>
</variables>
<variables name="ETH_PORT_STATUS" typeName="WORD">
<comment>Ethernet port status</comment>
</variables>
<variables name="NTP_UPDATE" typeName="UINT">
<comment>Time elapsed since last update from NTP server (unit: 100 ms)</comment>
</variables>
<variables name="MAX_PACKET_INTERVAL" typeName="UINT">
<comment>Max packet interval for output packets (unit: 1 ms)</comment>
</variables>
<variables name="IN_BYTES" typeName="UINT">
<comment>Number of bytes received on interface</comment>
</variables>
<variables name="IN_ERRORS" typeName="UINT">
<comment>Numberof inbound packets that contain errors</comment>
</variables>
<variables name="OUT_BYTES" typeName="UINT">
<comment>Number of bytes sent on interface</comment>
</variables>
<variables name="OUT_ERRORS" typeName="UINT">
<comment>Number of outbound packets that contain errors</comment>
</variables>
<variables name="SOE_UNCERTAIN" typeName="BOOL">
<comment>SOE uncertain (in timestamping system only)</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_BMENOC0301_4">
<structure>
<variables name="ETH_STATUS" typeName="WORD">
<comment>Ethernet status</comment>
</variables>
<variables name="PORT1_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 1</comment>
</variables>
<variables name="PORT2_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 2</comment>
</variables>
<variables name="PORT3_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet port 3</comment>
</variables>
<variables name="ETH_BKP_PORT_LINK" typeName="BOOL">
<comment>Link up/down for Ethernet backplane port</comment>
</variables>
<variables name="SCANNER_OK" typeName="BOOL">
<comment>Scanner OK and scanning at least 1 equipment (if at least 1 equipment configured)</comment>
</variables>
<variables name="GLOBAL_STATUS" typeName="BOOL">
<comment>0: one or more services not operating normally / 1: all operational</comment>
</variables>
<variables name="NETWORK_HEALTH" typeName="BOOL">
<comment>1: No traffic overload detected / 0: Traffic overload detected</comment>
</variables>
<variables name="SERVICE_STATUS" typeName="WORD">
<comment>One bit for each user-observable feature</comment>
</variables>
<variables name="RSTP_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="PORT502_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="SNMP_SERVICE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="MAIN_IP_ADDRESS_STATUS" typeName="BOOL">
<comment>Main IP address status (0 in caes of duplicate IP or no IP assigned)</comment>
</variables>
<variables name="EIP_SCANNER" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="MODBUS_SCANNER" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="SNTP_CLIENT" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="WEB_SERVER" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="FIRMWARE_UPGRADE" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="FTP" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="FDR_SERVER" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="EIP_ADAPTER" typeName="BOOL">
<comment>0: service not operating normally / 1: service operating normally or disabled</comment>
</variables>
<variables name="SERVICE_STATUS2" typeName="WORD">
<comment>One bit for each user-observable feature</comment>
</variables>
<variables name="LLDP_SERVICE" typeName="BOOL">
<comment>LLDP service status</comment>
</variables>
<variables name="EVENT_LOG_STATUS" typeName="BOOL">
<comment>0: event log service not operating normally / 1: event log service operating normally</comment>
</variables>
<variables name="LOG_SERVER_NOT_REACHABLE" typeName="BOOL">
<comment>1: No acknowledgement received from the syslog server / 0: otherwise</comment>
</variables>
<variables name="ETH_PORT_1_2_STATUS" typeName="BYTE">
<comment>Ethernet port 1 and 2 status</comment>
</variables>
<variables name="ETH_PORT3_BKP_STATUS" typeName="BYTE">
<comment>Ethernet port 3 and backplane port status</comment>
</variables>
<variables name="FIRMWARE_VERSION" typeName="WORD">
<comment>MSB=Major revision, LSB=Minor revision</comment>
</variables>
<variables name="FDR_USAGE" typeName="BYTE">
<comment>% of FDR server usage</comment>
</variables>
<variables name="IN_PACKETS" typeName="UINT">
<comment>Number of packets received on interface</comment>
</variables>
<variables name="IN_ERRORS" typeName="UINT">
<comment>Number of inbound packets that contain errors</comment>
</variables>
<variables name="OUT_PACKETS" typeName="UINT">
<comment>Number of packets sent on interface</comment>
</variables>
<variables name="OUT_ERRORS" typeName="UINT">
<comment>Number of outbound packets that contain errors</comment>
</variables>
<variables name="CONF_SIG" typeName="UDINT">
<comment>Signature of all files on local module FDR server</comment>
</variables>
<variables name="LS_HEALTH" typeName="ARRAY [1..16] of BOOL">
<comment>Local Slave health bits (local slave 1 to 16)</comment>
</variables>
<variables name="DIO_HEALTH" typeName="ARRAY [0..127] of BOOL">
<comment>DIO health bits (1 bit per DIO up to 128 DIOs. 112-127 are reserved for future extension)</comment>
</variables>
<variables name="DIO_CTRL" typeName="ARRAY[0..127] OF BOOL">
<comment>DIO control bits (1 bit per DIO up to 128 DIOs. 112-127 are reserved for future extension)</comment>
</variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_M_ECPU_HSBY">
<structure>
<variables name="REMOTE_STS_VALID" typeName="BOOL">
<comment>Status of the remote PLC</comment>
</variables>
<variables name="APP_MISMATCH" typeName="BOOL">
<comment>Applications of the primary and the standby are different from the origin</comment>
</variables>
<variables name="LOGIC_MISMATCH_ALLOWED" typeName="BOOL">
<comment>Command that allows logic mismatch between the primary and the standby</comment>
</variables>
<variables name="LOGIC_MISMATCH" typeName="BOOL">
<comment>Applications of the primary and the standby are running with different step of online modification</comment>
</variables>
<variables name="SFC_MISMATCH" typeName="BOOL">
<comment>Applications of the primary and the standby are running with difference at least one SFC section</comment>
</variables>
<variables name="OFFLINE_BUILD_MISMATCH" typeName="BOOL">
<comment>Applications of the primary and the standby are running with different steps of offline modification</comment>
</variables>
<variables name="APP_BUILDCHANGE_DIFF" typeName="UINT">
<comment>Number of differences between the application of the primary and application of the secondary</comment>
</variables>
<variables name="MAX_APP_BUILDCHANGE_DIFF" typeName="UINT">
<comment>Number maximum of differences allowed between application of the primary and the application of the secondary</comment>
</variables>
<variables name="FW_MISMATCH_ALLOWED" typeName="BOOL">
<comment>Command that allows firmware mismatch between the primary and the standby</comment>
</variables>
<variables name="FW_MISMATCH" typeName="BOOL">
<comment>Firmware of the primary is different from the firmware of the standby</comment>
</variables>
<variables name="DATA_LAYOUT_MISMATCH" typeName="BOOL">
<comment>Data layout of the primary is different from the data layout of the standby</comment>
</variables>
<variables name="DATA_DISCARDED" typeName="UINT">
<comment>Amount of data in KByte sent by the primary and discarded by the standby</comment>
</variables>
<variables name="DATA_NOT_UPDATED" typeName="UINT">
<comment>Amount of data in KByte not updated by the standby (rounded to the upper)</comment>
</variables>
<variables name="BACKUP_APP_MISMATCH" typeName="BOOL">
<comment>Backup application of the primary and backup application fo the standby</comment>
</variables>
<variables name="PLCA_ONLINE" typeName="BOOL">
<comment>Command that allows PLC A to go promary or standby (modification allowed only on primary)</comment>
</variables>
<variables name="PLCB_ONLINE" typeName="BOOL">
<comment>Command that allows PLC B to go primary or standby (modification allowed only on primary)</comment>
</variables>
<variables name="CMD_SWAP" typeName="BOOL">
<comment>Swap primary and standby command (modification allowed only on primary)</comment>
</variables>
<variables name="CMD_APP_TRANSFER" typeName="BOOL">
<comment>Transfer application from the primary to the standby command (modification allowed only on primary)</comment>
</variables>
<variables name="CMD_RUN_AFTER_TRANSFER" typeName="BOOL">
<comment>Command that automatically start the application in Run after transfer (modification allowed only on primary)</comment>
</variables>
<variables name="CMD_RUN_REMOTE" typeName="BOOL">
<comment>Run remote controller command (modification allowed only on primary)</comment>
</variables>
<variables name="CMD_STOP_REMOTE" typeName="BOOL">
<comment>Stop remote controller command (modification allowed on primary, on stop or on wait)</comment>
</variables>
<variables name="CMD_COMPARE_INITIAL_VALUE" typeName="BOOL">
<comment>Command that start a comparison of the variable initial values (modification allowed only on primary)</comment>
</variables>
<variables name="INITIAL_VALUE_MISMATCH" typeName="BOOL">
<comment>Initial values comparision status</comment>
</variables>
<variables name="MAST_SYNCHRONIZED" typeName="BOOL">
<comment>Exchanged data from the last MAST cycle standby receipt status</comment>
</variables>
<variables name="FAST_SYNCHRONIZED" typeName="BOOL">
<comment>Exchanged data from the last FAST cycle standby receipt status</comment>
</variables>
<variables name="SAFE_SYNCHRONIZED" typeName="BOOL">
<comment>Exchanged data from the last SAFE cycle standby receipt status</comment>
</variables>
<variables name="LOCAL_HSBY_STS" typeName="T_M_ECPU_HSBY_STS"></variables>
<variables name="REMOTE_HSBY_STS" typeName="T_M_ECPU_HSBY_STS"></variables>
</structure>
</DDTSource>
<DDTSource DDTName="T_M_ECPU_HSBY_STS">
<structure>
<variables name="HSBY_LINK_ERROR" typeName="BOOL">
<comment>Hot standby link error (no heartbeat connection on hot standby link)</comment>
</variables>
<variables name="HSBY_SUPPLEMENTARY_LINK_ERROR" typeName="BOOL">
<comment>Hot standby supplementary link error (no heartbeat connection on supplementary link)</comment>
</variables>
<variables name="WAIT" typeName="BOOL">
<comment>The PLC is in Run but is waiting to be part of the hot standby system</comment>
</variables>
<variables name="RUN_PRIMARY" typeName="BOOL">
<comment>The PLC is in Run Primary state</comment>
</variables>
<variables name="RUN_STANDBY" typeName="BOOL">
<comment>The PLC is in Run Standby state</comment>
</variables>
<variables name="STOP" typeName="BOOL">
<comment>The PLC is in Stop</comment>
</variables>
<variables name="PLC_A" typeName="BOOL">
<comment>The PLC switch is on A position</comment>
</variables>
<variables name="PLC_B" typeName="BOOL">
<comment>The PLC switch is on B position</comment>
</variables>
<variables name="EIO_ERROR" typeName="BOOL">
<comment>The PLC does not see any of the configured EIO drops</comment>
</variables>
<variables name="SD_CARD_PRESENT" typeName="BOOL">
<comment>An SD Card is inserted</comment>
</variables>
<variables name="LOCAL_RACK_STS" typeName="BOOL">
<comment>True: the local rack is OK / False: the local rack is not ok (module missing)</comment>
</variables>
<variables name="REGISTER" typeName="ARRAY [0..63] of WORD">
<comment>Free space to exchange information between primary and standby PLCs.</comment>
</variables>
</structure>
</DDTSource>
<FBSource nameOfFBType="ACI030"></FBSource>
<FBSource nameOfFBType="ACI040"></FBSource>
<FBSource nameOfFBType="ACO020"></FBSource>
<FBSource nameOfFBType="ACO130"></FBSource>
<FBSource nameOfFBType="AII330"></FBSource>
<FBSource nameOfFBType="AII33010"></FBSource>
<FBSource nameOfFBType="AIO330"></FBSource>
<FBSource nameOfFBType="ALIM"></FBSource>
<FBSource nameOfFBType="AMM090"></FBSource>
<FBSource nameOfFBType="ARI030"></FBSource>
<FBSource nameOfFBType="ATI030"></FBSource>
<FBSource nameOfFBType="AUTOTUNE"></FBSource>
<FBSource nameOfFBType="AVGMV"></FBSource>
<FBSource nameOfFBType="AVGMV_K"></FBSource>
<FBSource nameOfFBType="AVI030"></FBSource>
<FBSource nameOfFBType="AVO030"></FBSource>
<FBSource nameOfFBType="CAN_HANDLER"></FBSource>
<FBSource nameOfFBType="CLOSE_FILE"></FBSource>
<FBSource nameOfFBType="COMP_DB"></FBSource>
<FBSource nameOfFBType="COMP_PID"></FBSource>
<FBSource nameOfFBType="CREATE_FILE"></FBSource>
<FBSource nameOfFBType="CTD"></FBSource>
<FBSource nameOfFBType="CTD_DINT"></FBSource>
<FBSource nameOfFBType="CTD_INT"></FBSource>
<FBSource nameOfFBType="CTD_UDINT"></FBSource>
<FBSource nameOfFBType="CTD_UINT"></FBSource>
<FBSource nameOfFBType="CTU"></FBSource>
<FBSource nameOfFBType="CTU_DINT"></FBSource>
<FBSource nameOfFBType="CTU_INT"></FBSource>
<FBSource nameOfFBType="CTU_UDINT"></FBSource>
<FBSource nameOfFBType="CTU_UINT"></FBSource>
<FBSource nameOfFBType="CTUD"></FBSource>
<FBSource nameOfFBType="CTUD_DINT"></FBSource>
<FBSource nameOfFBType="CTUD_INT"></FBSource>
<FBSource nameOfFBType="CTUD_UDINT"></FBSource>
<FBSource nameOfFBType="CTUD_UINT"></FBSource>
<FBSource nameOfFBType="D_ACT"></FBSource>
<FBSource nameOfFBType="D_DYN"></FBSource>
<FBSource nameOfFBType="D_GRP"></FBSource>
<FBSource nameOfFBType="D_LOCK"></FBSource>
<FBSource nameOfFBType="D_PRE"></FBSource>
<FBSource nameOfFBType="D_REA"></FBSource>
<FBSource nameOfFBType="DEADTIME"></FBSource>
<FBSource nameOfFBType="DELAY"></FBSource>
<FBSource nameOfFBType="DELETE_FILE"></FBSource>
<FBSource nameOfFBType="DERIV"></FBSource>
<FBSource nameOfFBType="DROP"></FBSource>
<FBSource nameOfFBType="DTIME"></FBSource>
<FBSource nameOfFBType="ERT_854_10"></FBSource>
<FBSource nameOfFBType="ERT_854_20"></FBSource>
<FBSource nameOfFBType="ERT_854_30"></FBSource>
<FBSource nameOfFBType="ETH_PORT_CTRL"></FBSource>
<FBSource nameOfFBType="F_TRIG"></FBSource>
<FBSource nameOfFBType="FGEN"></FBSource>
<FBSource nameOfFBType="FIFO"></FBSource>
<FBSource nameOfFBType="GET_FILE_INFO"></FBSource>
<FBSource nameOfFBType="GET_FREESIZE"></FBSource>
<FBSource nameOfFBType="GET_TS_EVT_M"></FBSource>
<FBSource nameOfFBType="HSBY_BUILD_OFFLINE"></FBSource>
<FBSource nameOfFBType="HYST_DINT"></FBSource>
<FBSource nameOfFBType="HYST_INT"></FBSource>
<FBSource nameOfFBType="HYST_REAL"></FBSource>
<FBSource nameOfFBType="HYST_UDINT"></FBSource>
<FBSource nameOfFBType="HYST_UINT"></FBSource>
<FBSource nameOfFBType="I_NORM_WARN"></FBSource>
<FBSource nameOfFBType="I_PHYS_WARN"></FBSource>
<FBSource nameOfFBType="I_SCALE_WARN"></FBSource>
<FBSource nameOfFBType="I_SET"></FBSource>
<FBSource nameOfFBType="IMC"></FBSource>
<FBSource nameOfFBType="INDLIM_DINT"></FBSource>
<FBSource nameOfFBType="INDLIM_INT"></FBSource>
<FBSource nameOfFBType="INDLIM_REAL"></FBSource>
<FBSource nameOfFBType="INDLIM_UDINT"></FBSource>
<FBSource nameOfFBType="INDLIM_UINT"></FBSource>
<FBSource nameOfFBType="INTEG"></FBSource>
<FBSource nameOfFBType="INTEGRATOR"></FBSource>
<FBSource nameOfFBType="INTEGRATOR1"></FBSource>
<FBSource nameOfFBType="L9_CKSM"></FBSource>
<FBSource nameOfFBType="L9_DCTR"></FBSource>
<FBSource nameOfFBType="L9_DRUM"></FBSource>
<FBSource nameOfFBType="L9_ICMP"></FBSource>
<FBSource nameOfFBType="L9_ID"></FBSource>
<FBSource nameOfFBType="L9_IE"></FBSource>
<FBSource nameOfFBType="L9_MRTM"></FBSource>
<FBSource nameOfFBType="L9_MSTR"></FBSource>
<FBSource nameOfFBType="L9_PID2"></FBSource>
<FBSource nameOfFBType="L9_SCIF"></FBSource>
<FBSource nameOfFBType="L9_STAT"></FBSource>
<FBSource nameOfFBType="L9_T001"></FBSource>
<FBSource nameOfFBType="L9_T01"></FBSource>
<FBSource nameOfFBType="L9_T1"></FBSource>
<FBSource nameOfFBType="L9_T1MS"></FBSource>
<FBSource nameOfFBType="L9_UCTR"></FBSource>
<FBSource nameOfFBType="L9P_KPID"></FBSource>
<FBSource nameOfFBType="L9P_PI"></FBSource>
<FBSource nameOfFBType="L9P_PID"></FBSource>
<FBSource nameOfFBType="LAG"></FBSource>
<FBSource nameOfFBType="LAG1"></FBSource>
<FBSource nameOfFBType="LAG2"></FBSource>
<FBSource nameOfFBType="LAG_FILTER"></FBSource>
<FBSource nameOfFBType="LDLG"></FBSource>
<FBSource nameOfFBType="LEAD"></FBSource>
<FBSource nameOfFBType="LEAD_LAG"></FBSource>
<FBSource nameOfFBType="LEAD_LAG1"></FBSource>
<FBSource nameOfFBType="LIFO"></FBSource>
<FBSource nameOfFBType="LIMV"></FBSource>
<FBSource nameOfFBType="LXM_DOWNLOADMTASK"></FBSource>
<FBSource nameOfFBType="LXM_GEARPOS"></FBSource>
<FBSource nameOfFBType="LXM_GEARPOSS"></FBSource>
<FBSource nameOfFBType="LXM_STARTMTASK"></FBSource>
<FBSource nameOfFBType="LXM_UPLOADMTASK"></FBSource>
<FBSource nameOfFBType="MBP_MSTR"></FBSource>
<FBSource nameOfFBType="MC_HOME"></FBSource>
<FBSource nameOfFBType="MC_JOG"></FBSource>
<FBSource nameOfFBType="MC_MOVEABSOLUTE"></FBSource>
<FBSource nameOfFBType="MC_MOVEADDITIVE"></FBSource>
<FBSource nameOfFBType="MC_MOVERELATIVE"></FBSource>
<FBSource nameOfFBType="MC_MOVEVELOCITY"></FBSource>
<FBSource nameOfFBType="MC_POWER"></FBSource>
<FBSource nameOfFBType="MC_READACTUALPOSITION"></FBSource>
<FBSource nameOfFBType="MC_READACTUALTORQUE"></FBSource>
<FBSource nameOfFBType="MC_READACTUALVELOCITY"></FBSource>
<FBSource nameOfFBType="MC_READAXISERROR"></FBSource>
<FBSource nameOfFBType="MC_READPARAMETER"></FBSource>
<FBSource nameOfFBType="MC_READSTATUS"></FBSource>
<FBSource nameOfFBType="MC_RESET"></FBSource>
<FBSource nameOfFBType="MC_STOP"></FBSource>
<FBSource nameOfFBType="MC_TORQUECONTROL"></FBSource>
<FBSource nameOfFBType="MC_WRITEPARAMETER"></FBSource>
<FBSource nameOfFBType="MFLOW"></FBSource>
<FBSource nameOfFBType="MS"></FBSource>
<FBSource nameOfFBType="MS_DB"></FBSource>
<FBSource nameOfFBType="NOP850_EVTS"></FBSource>
<FBSource nameOfFBType="O_NORM_WARN"></FBSource>
<FBSource nameOfFBType="O_PHYS_WARN"></FBSource>
<FBSource nameOfFBType="O_SCALE_WARN"></FBSource>
<FBSource nameOfFBType="O_SET"></FBSource>
<FBSource nameOfFBType="OPEN_FILE"></FBSource>
<FBSource nameOfFBType="PCON2"></FBSource>
<FBSource nameOfFBType="PCON3"></FBSource>
<FBSource nameOfFBType="PD_OR_PI"></FBSource>
<FBSource nameOfFBType="PDM"></FBSource>
<FBSource nameOfFBType="PI"></FBSource>
<FBSource nameOfFBType="PI1"></FBSource>
<FBSource nameOfFBType="PI_B"></FBSource>
<FBSource nameOfFBType="PID"></FBSource>
<FBSource nameOfFBType="PID1"></FBSource>
<FBSource nameOfFBType="PID_P"></FBSource>
<FBSource nameOfFBType="PIDIFF"></FBSource>
<FBSource nameOfFBType="PIDP1"></FBSource>
<FBSource nameOfFBType="PIP"></FBSource>
<FBSource nameOfFBType="PPI"></FBSource>
<FBSource nameOfFBType="PRJ_VERS"></FBSource>
<FBSource nameOfFBType="PWM"></FBSource>
<FBSource nameOfFBType="PWM1"></FBSource>
<FBSource nameOfFBType="PWS_CMD"></FBSource>
<FBSource nameOfFBType="PWS_DIAG"></FBSource>
<FBSource nameOfFBType="QDTIME"></FBSource>
<FBSource nameOfFBType="QPWM"></FBSource>
<FBSource nameOfFBType="R2T_DINT"></FBSource>
<FBSource nameOfFBType="R2T_INT"></FBSource>
<FBSource nameOfFBType="R2T_REAL"></FBSource>
<FBSource nameOfFBType="R2T_UDINT"></FBSource>
<FBSource nameOfFBType="R2T_UINT"></FBSource>
<FBSource nameOfFBType="R_TRIG"></FBSource>
<FBSource nameOfFBType="RAMP"></FBSource>
<FBSource nameOfFBType="RATIO"></FBSource>
<FBSource nameOfFBType="RD_FILE_TO_DATA"></FBSource>
<FBSource nameOfFBType="READ_PARAM_MX"></FBSource>
<FBSource nameOfFBType="READ_SDO"></FBSource>
<FBSource nameOfFBType="READ_STS_MX"></FBSource>
<FBSource nameOfFBType="RESTORE_PARAM_MX"></FBSource>
<FBSource nameOfFBType="RS"></FBSource>
<FBSource nameOfFBType="SAH"></FBSource>
<FBSource nameOfFBType="SAMPLETM"></FBSource>
<FBSource nameOfFBType="SAVE_PARAM_MX"></FBSource>
<FBSource nameOfFBType="SCALING"></FBSource>
<FBSource nameOfFBType="SCON3"></FBSource>
<FBSource nameOfFBType="SEEK_FILE"></FBSource>
<FBSource nameOfFBType="SERVO"></FBSource>
<FBSource nameOfFBType="SET_FILE_ATTRIBUTES"></FBSource>
<FBSource nameOfFBType="SFCCNTRL"></FBSource>
<FBSource nameOfFBType="SMOOTH_RATE"></FBSource>
<FBSource nameOfFBType="SP_SEL"></FBSource>
<FBSource nameOfFBType="SPLRG"></FBSource>
<FBSource nameOfFBType="SR"></FBSource>
<FBSource nameOfFBType="SRCH"></FBSource>
<FBSource nameOfFBType="STEP2"></FBSource>
<FBSource nameOfFBType="STEP3"></FBSource>
<FBSource nameOfFBType="SYSSTATE"></FBSource>
<FBSource nameOfFBType="T2T"></FBSource>
<FBSource nameOfFBType="TE_DOWNLOADDRIVERPARAM"></FBSource>
<FBSource nameOfFBType="TE_UPLOADDRIVERPARAM"></FBSource>
<FBSource nameOfFBType="THREE_STEP_CON1"></FBSource>
<FBSource nameOfFBType="THREEPOINT_CON1"></FBSource>
<FBSource nameOfFBType="TOF"></FBSource>
<FBSource nameOfFBType="TON"></FBSource>
<FBSource nameOfFBType="TOTALIZER"></FBSource>
<FBSource nameOfFBType="TP"></FBSource>
<FBSource nameOfFBType="TRIGGER"></FBSource>
<FBSource nameOfFBType="TWOPOINT_CON1"></FBSource>
<FBSource nameOfFBType="VEL_LIM"></FBSource>
<FBSource nameOfFBType="VLIM"></FBSource>
<FBSource nameOfFBType="WR_DATA_TO_FILE"></FBSource>
<FBSource nameOfFBType="WRITE_CMD_MX"></FBSource>
<FBSource nameOfFBType="WRITE_PARAM_MX"></FBSource>
<FBSource nameOfFBType="WRITE_SDO"></FBSource>
<FBSource nameOfFBType="XDROP"></FBSource>
</VariablesExchangeFile>