82a8f30074cafa09fd01c11777358153769c736e
30 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| 82a8f30074 |
T7.10 - D5: one analytics implementation, and its report on the admin console
Usage analytics existed as five of the nine colliding globals creator-frame.md counted (ANALYTICS_KEY, analyticsLoad, analyticsSave, downloadAnalytics, showAnalytics), twice - and the wizard's copy had no caller, because the button lived on the creator. The admin console had a THIRD private reader (usageLoad/downloadUsage) that only saw the wizard's key. Now: ONE core, html/wp-usage.js (window.WPUsage: load/save/track/download + the two pre-move storage keys, verbatim). The creator and wizard keep only a thin track() wrapper - page state like the creator's dev-mode pause belongs to the page - and record exactly what they recorded before, under the same keys, so everything captured before this task still reads (probe plants a legacy-format event and finds it in the report). The "Usage data" button left the creator toolbar; the report lives in admin.html's usage card, covering BOTH tools with a download each, behind the same admin gate as the rest of the console (a non-admin sees the denied card and nothing else), usable at 390px. Two probes re-pointed, both with the reason in the code: - cards_check pinned admin.js byte-identical to HEAD - right for T6.5, but as a standing probe it would fail every legitimate later edit; D5 targets admin.js by name. A7's localization is protected by the feature checks and the end-to-end drive, plus a wiring assertion on the block itself. - frame_check listed "Usage data" among the toolbar buttons that must be visible; it now asserts the button is GONE, so the duplicate cannot quietly return. Verification (each probe run alone): NEW tests/usage_check.py 15/15 (grep half: WPUsage defined once, no page touches the keys directly, none of the five globals survives anywhere). Regressions: cards_check ALL PASS, frame_check 39/39. Items: D5 Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
|||
| c084f730b3 |
T7.7 - CR-007/D8: the sheet travels with the package, and opens offline
The field wants the specific PDF attached, not a link to a Bluebeam session.
Storage: a new wp_files table (Alembic f3a9d2c1e8b7, additive only) holding
the BYTES in the same database as everything else - the Aug 18 decision: a
backup that excludes the drawings is a backup you cannot restore from. The
D8 numbers bound the cost and are enforced ON THE SERVER as well as in the
browser: 5MB a file (413, naming the limit), PDF and image mimes only (400,
naming what is accepted), 2GB a project (413 naming the ceiling; response
flags the 80% warning). The ceiling is env-overridable for tests; the shipped
default is the decision, asserted from source.
The package record carries a server-owned meta mirror (data.files): the
upload/patch/delete routes rewrite it, and the upsert re-asserts the stored
copy over whatever a client sends - a save from a browser that had not seen
an upload land cannot erase the list.
Creator: uploads live beside the links (links still work), the limits and the
running project total sit ABOVE the picker (amber from 80%, red at full), a
refused file costs nothing but a toast and never leaves the browser (the
probe counts fetch calls), and each drawing has a description ("Tray section,
Level 3 east only") editable inline and persisted server-side. Uploads attach
to the saved record, so T4.3's autosave keeps the surrounding form safe (X8).
Export: uploads print with the package - name, size tag, description on the
attachments table, images inline as the sheet itself, PDFs as links.
Offline (D8): the service worker gains a drawings cache (cache-first on
/api/files/), and field.js prefetches ONLY the requesting user's assigned
packages - assignment-scoped by decision, not project-wide. The probe's first
offline check used CDP network emulation and PASSED FOR THE WRONG REASON: the
emulation binds to the page's session and the service worker fetches on its
own target, straight past it. The shipped check kills the server instead -
my drawing opens, the other package's does not, against a genuinely dead
network.
Field View: a Drawings section on the package detail, 44px rows, description
inline, inside the 390px screen.
Verification (each probe run alone): NEW tests/files_check.py 36/36; the
Alembic chain applied end-to-end to a scratch DB and the table verified.
Regressions: form_structure_check 50/51 (the standing F6 height gap),
frame_check 39/39.
Items: CR-007, D8 (X8 honored)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
|||
| 2486f87010 |
T7.6 - CR-014/D2/D9/D10: the Ready for QA gate, notification only, shipped off
Marlena's ask: QA sees inbound work ahead of time, not after the fact. The rung: 'Ready for QA' sits between In Progress and QC in BOTH ladders (wp-creation-app.js STATUS_ORDER, server/app.py STATUS_ORDER) and in Field View's list - inside the T7.3 transition model, not beside it: entering it from an unreleased state crosses the release gates, and 'Issue' (hold) stays a branch. The dashboard filter and the navigator grouping learned the state from the ladder without their own edits. Who hears (D2): the QA GROUP, a multi-pick of project members on the SOP wizard's team step, stored as account ids at data.sop.project.qaGroupIds. Entering Ready for QA emails that list and nobody else. A rejection emails the owner AND the same list (amended answer), returns the package to In Progress, and REQUIRES a fresh comment - server-enforced on both write paths (the first version accepted any old comment already on the record, which made every rejection after the first one free; the gate now demands a new entry). Accept and reject are real buttons on the release banner; the comment modal enforces its field; qa_ready / qa_rejected / status_changed all land in the audit history. The link (X1): wp_link() now opens THE package - wp-creation-index.html ?project&wp=<id>, which the creator boots directly and login.html?next= round-trips for a signed-out recipient. It previously pointed at the suite root, which is exactly the failure X1 names; assignment mail inherits the fix. Email discipline (D10 + standing rules): ships OFF (the stored setting the admin console already owns; PUT /api/settings is admin-only, 403 for anyone else, and audited). With it off, transitions write outbox rows marked 'skipped' and the sink receives nothing. With it on, the probe runs a REAL SMTP conversation against an in-process capture sink and asserts the count and the exact recipient set. A dead SMTP host leaves a 'failed' outbox row with the error recorded. The SMTP password exists only in the environment. DEVIATION, stated: the task's Do-paragraph asks the email to include location and a scope summary; the done-when list (and CLAUDE.md) says no customer IP in a message body. The done-when wins: bodies carry the WP number, who moved it, and the deep link. A location canary planted on the package is asserted absent from every captured message. If the fuller body is wanted, that is a product call - needs Nick. Found while building, logged not fixed (BL-021): project_sop_team() reads sop.data['project'], a path pushSOP never writes - the critical-reopen email has never actually reached the PM/CM. One-line fix, owned by T9.9. Field View (D9): 'Ready for QA' is carried by TEXT on the card at 390px. Verification (each probe run alone): NEW tests/qa_gate_check.py 40/40. Regressions: hold_check 50/50, pipeline_check 44/44, aggregates_check 16/16, frame_check 39/39, validation_check 83/83. Items: CR-014, D2, D9, D10 (X1, X3 honored) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
|||
| 60434d452c |
T7.4 - A2: one warning, said once, visible from anywhere
The same not-release-ready warning rendered three times on the creator:
1. the release banner under the context bar - STAYS, and is now the only one
2. updateStickyStatus() in the sticky save bar - removed
3. a static field-hint under the status radios - removed
The count moved to a badge on the Constraints rail entry (D3's rail replaced
the tabs A2's "tab count badge" referred to). The rail is position:sticky at
BOTH widths, so the badge is on screen from any section at 390px and 1440px -
measured with the constraint table AND the banner both scrolled out of view.
The badge is a number, not a colour: the count is the content, and the rail
entry carries an aria-label saying it ("Constraints - 3 open").
The banner is now role="status" (the login.html aria-live pattern, per C1) and
only rewrites when its message actually changes - a live region that repaints
on every save announces on every save.
Duplicate 2 was not just noise. It wrote the warning with textContent into
the SAME span the B5 autosave indicator mounts into, destroying the indicator
on every count change. Removing the duplicate is what fixes that; the probe
pins the indicator's survival across banner updates.
Verification (each probe run alone): NEW tests/warning_check.py 17/17.
Regressions: hold_check 50/50, form_structure_check 50/51 (the standing F6
height gap, re-measured after T7.5 as recorded at T7.2).
Items: A2
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
|||
| 755c976841 |
T7.2 - F6/D3: the form gets structure - a section rail, one section open
F6 as amended by D3 (Aug 18): one page, persistent side navigation, sections collapsible, only the current one open by default, plus Expand all. Tabs were rejected in D3 because they hide sections a first-time author does not know exist. What changed: - The jump-chip strip (#section-nav, span onclick) is gone. In its place a <nav> section rail of real <button> entries, aria-current on the current section, 44px tap targets, above the form at 390px and beside it at 1440px. - Every section heading is now a disclosure <button> with aria-expanded and aria-controls. One section open at rest; Expand all (aria-pressed) opens everything and is remembered per browser. - Sections are URL-addressable (?section=, T4.2 machinery) and a deep link to a collapsed section expands it. Positional-id fallback removed: a card without an id gets a console.error and no rail entry, never an invented sec-N id that would ride into shareable URLs and move between visits. - General Information (1,288px on its own) split into #general-card and #assign-card (Assignment & Schedule). The split is presentational: both cards are the ONE CR-006 section `general` (WP_SECTION_NODES lists both), so wp-sections.js and the SOP wizard are untouched. CR-001's adjacency (P6 activity beside due date) is preserved and asserted. - gotoSection() flushes autosave, which the deleted chips used to do. - secMakeToggle() preserves every element child of a heading - help tips go outside the button, everything else inside the label. The first version cleared textContent and destroyed #saved-count, which killed boot one line short of wpCreatorReady with the page still visibly rendered. - BL-013 folded in per the task: the T3.4 focus ring on the rebuilt form. frame_check reports outline solid 2px on creator inputs. Height, measured not asserted: 5,399px before; 1,995px at rest at 1440x900. DONE-WHEN NOT FULLY MET - stated per CLAUDE.md rather than marked complete: "no single view exceeds roughly two screen heights at rest" reads 2.22 screens (1995/900). The remaining gap is page chrome this wave reworks: .ctx-bar (67px, T7.4) and .release-banner (45px, T7.5). The criterion was already amended once (D3, "at rest") and is not being moved again to fit; tests/form_structure_check.py keeps the check red and it is re-measured at the end of wave 7. Every other done-when entry passes. Backlog: BL-001's cause corrected a third time - at rest the overflow is help.js's .help-tip::after tooltip (481 vs 390), the S8 component T9.5 rebuilds; the tables still overflow only when expanded. Deliberately not fixed here - a fix would be thrown away with the component at T9.5. Verification (each probe run alone): form_structure_check 50/51 (the height check above), sections_check 95/95, generalinfo_check 49/49, frame_check 39/39 regression pass. Items: F6, D3, BL-013, BL-001 (re-measured) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
|||
| 12d19446d5 |
T7.1 - B7: dissolve the creator iframe, and D1 give it back its sample data
There is no iframe in html/ any more. The creator is a top-level document with
the same app bar and the same tab strip as the SOP wizard; the two tabs that
used to swap a frame are links between them.
DEVIATION, stated rather than smuggled. The wave file says "remove the iframe
boundary so the creator renders in the parent document". It renders as its own
document instead. Every done-when is met - no iframe, no cross-frame messaging,
F4 resolved structurally, CR-006 toggles with no special-casing, back and
forward intact with T4.2's URL state - but the route is the other one, and the
reason is in creator-frame.md's own numbers:
merge into parent make it a page
selector collisions to resolve 21 0
script global collisions 9 0
cross-frame call sites to remove 28 28
probe entry points needing rework ~29 2
The 21 and the 9 were never the cost of dissolving the boundary. They are the
cost of MERGING TWO DOCUMENTS, which is a different change the boundary was
hiding. And 29 probe call sites address wp-creation-index.html directly, so a
route that keeps that address keeps all of them. creator-frame.md section 5
records this in full.
What went, and what replaced it:
#wp-frame, applyEmbedLayout, sizeWPFrame, viewportMinusChrome, chromeHeight,
renderWPTab, the resize handler, the ResizeObserver, --wp-chrome-h,
.content-area.embed-full, body.embed-full -> the window sizes the page
?embedded=1, body.embedded, .embed-hide, .embed-first -> nothing. An old
link carrying the param is ignored rather than half-obeyed.
openWpById / showDashboard / showForm / dashApplyFlag / applySopSections
called across the frame -> the URL. ?project= ?view= ?wp= ?flag= were
already read at the creator's own boot (T4.2), which is exactly why those four
could be DELETED rather than migrated. X4 is closed: the surviving path is the
one T5.5 built and proved.
inIframe in auth-guard.js, wp-chrome.js, wp-sidenav.js, help.js and _isTop in
project-data.js -> gone. help.js now reads the explicit WP_HELP_NO_FAB flag
both tool pages set, instead of inferring intent from where it is rendered.
.main-nav / .nav-tab in work-package-suite-styles.css -> wp-chrome.css,
because a tab row only one of two documents can style is the shape that put
the tabs in the parent and the toolbar in the child to begin with.
The three questions creator-frame.md section 4 said no count could answer:
1. The creator gets the app bar. It was the only page loading neither
wp-chrome file. Its header is now the .header-left / .header-right pair the
wizard uses, so the switcher lands in the same place on both.
2. Two sequence components, scoped not merged - confirmed Aug 18 that the
sequence is authored in the SOP and adjustable per package. BL-015 stays.
3. body.embedded is gone. The header it hid is replaced by the app bar; the
sample controls are visible in a new package toolbar (D1); the analytics
button is visible there until T7.10 moves it. The Dashboard BUTTON in that
row became a TAB, which is the one place B7's "fold the toolbar into the
tab row" actually happened.
Old addresses still resolve. ?tab=wp, ?view=dashboard and ?wp=<id> are in
bookmarks, in wp-sidenav's link map, and they are the shape CR-011 and CR-014
were specified against (X1). The wizard forwards them with replace(), so Back
does not bounce. Breaking these silently was the one regression this task could
have shipped that nobody would notice for weeks. frame_check.py section 4 pins
all three.
BEHAVIOUR CHANGE, deliberate. The live cross-frame hand-off showed the creator a
section toggle that had NOT been saved: flip it, look, reload, and the section
came back. What the creator shows now is the SOP that is stored. sections_check
5b pins both halves - an unsaved toggle does not travel, a saved one does.
BEHAVIOUR CHANGE, not deliberate, logged as BL-020. A tab switch is a page exit
now, so leaving the wizard with unsaved SOP edits fires T4.3's unsaved-work
guard. Nothing is lost - the guard writes the draft first and T4.3 recovers it -
but it is friction that did not exist, and suppressing a deliberate guard is a
product decision with its own downside. Logged, not quietly handled here.
tests/frame_check.py, 39 checks, new. Two of them exist because of failures
during this task rather than in it:
- "both documents parse and boot". A const shadowing a function parameter is a
SyntaxError, and work-package-suite-app.js did not parse at all for one run.
Four checks in url_state_check went red and not one said "the script did not
load". Asserting a page's own entry points exist costs nothing.
- "focus emulation is on, so a focus reading means something". An earlier draft
called page.call instead of page.ws.call inside a try/except and measured
nothing, reporting no focus ring anywhere - which looks exactly like a
finding. Trap 5 in reverse, for the second time in this project.
The four backlog entries logged against this file, re-measured rather than
assumed:
BL-001 still reproduces (485px in a 390px viewport) but its RECORDED CAUSE IS
WRONG. --nav-w now computes to 56px, so the injected-style explanation
is spent. The overflow is the creator's data tables - #asset-body's
lays out at 520px with no scroll container. frame_check reports the
offending boxes by selector and skips position:fixed subtrees, because
the comments drawer parked off-screen at right:844 made the first
measurement blame the drawer. Pinned, not fixed: T7.2 lays out the form.
BL-013 CLOSED. It was fixed by S12 in WAVE 4 - wp-creation-styles.css:209
carries the comment naming this entry - and nobody updated it. It was
quoted as a live CLAUDE.md violation while planning wave 7 and had not
been true for four waves. a11y_check walks 120 focusable elements on
the creator and every one rings at >= 3:1.
BL-006 15 by the probe's measure, unchanged; different denominator, stated.
BL-007 68 raw radii by the probe's measure. Nothing has reduced it in four
waves; it is measured every run now instead of once.
BL-018 cost a FOURTH probe. frame_check imports set_sop from sections_check
rather than writing a fifth copy of the workaround. T9.9 owns it.
Probes re-pointed, with reasons in the files: sections_check 5b (drove the live
hand-off), pipeline_check check 2 (read through contentDocument), f_items F4
(drove standalone and embedded; there is one mode now), validation_check
(lost "the wrong tab", gained the SOP gate).
Verified: frame_check 39/39, sections_check 95/95, pipeline_check 44/44,
url_state_check 23/23, validation_check 83/83, a11y_check 22/22,
autosave_check 34/34, aggregates_check 16/16, stepper_check 71/71,
browser_check 71/71, launcher_check 58/58, generalinfo_check 49/49,
rollup_check 63/63, cards_check 44/44, locations_check 58/58.
f_items: F1-F5 fixed, F6 reproduces (T7.2).
Metrics: iframes 1 -> 0, colour literals in rules outside theme-light.css 0,
dialogs 64, <div onclick> 2, .help-tip 18.
Items: B7 D1
Task: T7.1
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|||
| 4d186ea6a0 |
T6.3/T6.4 - CR-004 and CR-018: picked not typed, and totals that add up
CR-004 and CR-018 are the same change seen from two ends. CR-018 is why the
Acumatica cost code came out rather than being relabelled — the tracking
dimension the team wants is floor and area, not an accounting code — and CR-004
is what makes that dimension exist. Committed together because a rollup keyed on
free text is not a rollup, and structured location with nothing rolling up by it
is a form change nobody asked for.
CR-004 - three dependent dropdowns
Building filters Floor filters Sector, off the project's own taxonomy from
T5.4. Clearing a parent clears its children: not doing that is how a package
ends up filed under a floor that is not in the building it claims.
PATHS are stored, not names and not bare codes. A floor's own code is not
unique across buildings; `B-ONE/L1` is. That is what lets the dashboard filter
by a building and match everything beneath it with a prefix test, and it is
what CR-018 groups on.
The list is fetched with include_inactive=true, which is not a contradiction of
CR-005's "deactivating hides it from new work packages" — they are two
questions. What may be CHOSEN is active only. What may be SHOWN is everything,
because a package already referencing a deactivated value still has to render
its label, and blanking it on open would write the blank back on the next save.
A deactivated value that IS on the package is offered, labelled "(no longer
offered)"; on a fresh package it is not offered at all. Both checked.
X5, checked the way aggregates_check checks its own: localStorage is poisoned
with a fake building and the dropdown is required to ignore it.
wp_location survives as a hidden field. A package written before this keeps
what it said, and the form says so rather than dropping it.
CR-018 - the rollup
LOCATION_DIMENSIONS is now ("building", "floor", "sector"). T4.1's note said
"only this tuple and the keys inside each group change - the response shape
does not", and that held exactly.
Rolled up at EVERY level, server-side, not just at the leaf. "How many on
floor 2" is the question CR-018 asks and it is a level above the leaf groups;
summing them in the browser would be the same per-browser arithmetic B4
removed. Actual Hours rolls up along the same dimensions - that is the field
CR-017 retained, and this is why that decision mattered.
Packages with no location are an explicit "(unassigned)" row, not a gap. The
reason is arithmetic: a group set that silently omits them does not add up to
the project total, and a rollup that does not reconcile is decoration. The
probe checks every level sums to the project total, and to the estimated and
actual hour totals, using distinct primes so a mis-sum cannot land on the
right number by luck.
A package with a building but no floor lands in the floor-level unassigned row
alongside the one with no location at all - which is the honest answer, and is
asserted by its hours rather than by its count.
Free text captured before CR-004 groups under itself as a building rather than
collapsing into unassigned, one level deep. Pretending free text is a
hierarchy would file "FAB / LVL 1" under a building called "FAB / LVL 1".
server/app.py dimensions, _location_levels, hours per group
html/wp-creation-index.html three selects where the text box was
html/wp-creation-app.js the pickers, the filters, the rollup panel
html/wp-creation-styles.css .loc-picker, .loc-rollup
tests/rollup_check.py new - 63 checks
Done when — CR-004
[x] all three render as dropdowns populated from project configuration
[x] dependent filtering works, and clearing a parent clears its children
[x] values persist as codes; confirmed by reading what collectPackage stored
[x] the dashboard filters by each of the three
[x] a work package referencing a deactivated value still renders correctly
[x] all option data comes from the server - proved by poisoning the cache
Done when — CR-018
[x] the dashboard groups and totals by Building, Floor and Sector
[x] totals reconcile against an unfiltered count, at every level
[x] Actual Hours rolls up along the same dimensions
[x] grouping is computed server-side - proved by putting nine fake packages in
localStorage and requiring the panel to show none of them
[x] work packages with no location appear in an explicit unassigned group
No migration: location lives in the work package's JSON data blob like every
other per-package field. No colour literal added.
Verified one at a time
rollup_check 63/63 new
generalinfo_check 49/49
browser_check 71/71
pipeline 43/43
a11y 22/22
aggregates 16/16
f_items F1-F5 FIXED, F6 REPRODUCES (T7.2)
Question for the PR, per CLAUDE.md: the dashboard's location filters and the
rollup both key on the path, so a package saved with free text and no codes is
unreachable by any location filter and sits in its own building-level row. That
is correct and it is also a migration question - whether the existing free-text
locations should be mapped onto the taxonomy once the B100 list arrives, or left
as history. Nothing here decides it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| ce2d008897 |
T6.1/T6.2 - CR-001 and CR-003: the schedule driver and the urgency
Two fields and one board column mechanism, committed together because the second
is only there for the first: the board had NO sorting at all, CR-001 asks for a
sortable column, and CR-003 asks for another. Building the mechanism twice, or
building it once and pretending the second task got it free, are both worse than
saying so.
CR-001 - P6 activity ID and description
Every work package traces back to the schedule activity that drives it, so a
date on a package is anchored rather than floating. Placed beside the due
date, which is where the meeting put it and the reason it is there.
Free text. A validated lookup against an imported activity list is deferred
(BL-000a) partly because the Micron schedule is being reworked - importing it
now would import churn.
Both fields live inside General Information, so CR-006's toggle governs them
without any further wiring. The probe checks that by turning the section off
and reading the rendered document, rather than by asserting they are in the
right <div>.
CR-003 - Priority
Three levels, agreed live in the meeting, and no fourth. Normal is the
baseline default, and a package saved before today reads as Normal rather than
blank - blank would sort and filter as an invisible fourth level.
Sorted by ESCALATION, not alphabetically. High/Normal/Urgent would put the
most urgent last, which is the one thing the column exists to prevent. The
probe asserts the order AND that it is not the sorted order.
Colour is never the only signal. The label is always rendered; the three
differ by fill as well as by hue (outline / amber / red). Every value is a
canonical token - X7's warning is that without one source of truth for colour,
Normal/High/Urgent gets four implementations. 0 colour literals in the
creator's stylesheet, asserted rather than assumed.
Independent of status: the probe changes priority and checks the status radio
did not move, then checks collectPackage reports the new priority with the old
status.
Sorting, and what "including with empty values" had to decide
EMPTIES LAST, in both directions. Ascending by P6 activity means "the ones
with an activity, in order, then the ones without", because nobody sorts by a
column in order to look at the rows that have nothing in it. Reversing the
direction reverses the filled rows and leaves the blanks where they are. The
probe checks both directions and that no row is lost either way.
A non-numeric value in a numeric column is neither empty nor a number; it
sorts after the numbers rather than as NaN, which compares false against
everything and leaves the order undefined.
Every sortable header is a real <button> inside its <th>, so it is in the tab
order and Enter/Space work without being wired up. The direction is exposed
through aria-sort on the th as well as drawn as an arrow, and the sorted
column is bold - three channels (C1). Gates and the actions column are not
sortable and therefore are not offered as buttons.
html/wp-creation-index.html two P6 fields, the priority select
html/wp-creation-app.js DASH_COLUMNS, dashSortRows, dashHeaderCells,
WP_PRIORITIES, wpPriorityOf, priorityPill
html/wp-creation-styles.css .dash-sort, .prio
tests/generalinfo_check.py new - 49 checks
Done when — CR-001
[x] both fields exist, persist, and survive a reload (saved, reloaded, reopened)
[x] Activity ID renders next to Due Date on the detail view
[x] the column sorts correctly, including with empty values
[x] both fields appear on the PDF export
[x] the fields respect the CR-006 section toggles
Done when — CR-003
[x] exactly three values; Normal is the default on a new work package
[x] the dashboard filters and sorts by priority
[x] priority colours come from canonical tokens; no raw hex added
[x] colour is not the only signal - the label is always present
[x] priority prints on the PDF export
[x] changing priority does not alter status
No migration. Both fields live in the work package's JSON data blob, which is
where every other per-package field lives; nothing in server/models.py changed.
Verified one at a time
generalinfo_check 49/49 new
browser_check 71/71
sections_check 88/88
a11y 22/22
pipeline 43/43
url_state 23/23
aggregates 16/16
f_items F1-F5 FIXED, F6 REPRODUCES (T7.2)
One note on running these: two of the runs above aborted with "browser would not
start after 3 attempts". That is the documented back-to-back port exhaustion,
not a code fault - both passed after a pause. The brief warns about it and it is
real.
Question for the PR, per CLAUDE.md: priority has no effect on anything yet - it
does not sort the board by default, does not affect release readiness, and does
not appear on the field view. It is a label the planner sets and a filter the
dashboard offers. If Urgent is meant to DO something, that is a separate item.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| c453e50412 |
T5.6 - CR-002: Acumatica cost code and task, hidden by toggle
The team concluded these two are noise on a field work package: cost codes are
effectively constant on a job and the Acumatica task mapping is a PM concern.
The cost visibility they actually want is by building and floor, which is CR-004
and CR-018.
Hidden, not removed. CLAUDE.md: "Removed fields are hidden, not deleted (CR-002,
CR-016). Retain the data and the model." So this is a second, narrower toggle
list beside T5.5's sections - two fields inside General Information rather than
two more sections, because a section is a block of the document and these are
two rows in one.
no migration the values live in the work package's JSON data blob,
which nothing here writes to. The probe greps every
migration for a drop_column touching either.
no model change server/models.py is untouched by this task
no code change to the toggles are SOP data. Another project turns them
re-enable back on from step 12 and both fields return, values
included
A field is on only if its own toggle is on AND the section holding it is. Asked
as one question (WPSections.fieldOn) so no caller has to remember to ask both -
a field showing inside a hidden section is not a state worth reasoning about,
and the probe checks that case explicitly.
html/wp-sections.js FIELDS, fieldOn, normalizeFields
html/work-package-suite-app.js field rows nested under their section
html/work-package-suite-styles.css .field-toggle
html/wp-creation-index.html ids on the two .field wrappers
html/wp-creation-app.js WP_FIELD_NODES; both document rows conditional
tests/sections_check.py +22 checks (53 -> 75)
Done when
[x] neither field appears in the form, detail view or PDF export when off
[x] existing records still hold their values - a package EDITED while both are
off comes back through collectPackage() with both intact
[x] the fields can be re-enabled for another SOP without a code change
[x] no schema migration drops data - checked against every migration in the
tree, not just the ones this wave added
The whole .field wrapper is hidden, not the input: a bare label over nothing is
worse than either state.
Raised, not fixed
BL-019 A cost code that has left COST_CODES is silently blanked on edit.
wp_cost is a <select>, and setting .value to something with no matching
<option> does nothing at all - so opening such a package clears the
field and the next save writes the blank back. The same bug was fixed
once already for gov_wosize (work-package-suite-app.js:490-495) by
adding the stored value as an option; cost code never got it.
Found the honest way: a probe here used an invented cost code to prove
hiding a field does not delete its value, and the value came back
empty. That looked exactly like the toggle eating data. It was not, and
the probe now uses a real code and says why in a comment - a probe that
fails for a reason other than the one it names is worse than no probe.
Verified one at a time
sections_check 75/75 (53 + 22 for CR-002)
browser_check 71/71
stepper_check 70/70
a11y 22/22
url_state 23/23
autosave 34/34
locations_check 58/58
Question for the PR, per CLAUDE.md: BL-000b asks whether General Information
wants per-field toggles generally. This is not that - it is the two fields
CR-002 names, and the list is deliberately closed. If a third field wants one,
that is the general question and it needs the product answer BL-000b is holding.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| ae30c58337 |
T5.5 - CR-006: section toggles, and X4 resolved rather than deferred
X4 first, because the brief asks for it explicitly.
IMPLEMENTATION.md sequences CR-006 after B7 on the grounds that the toggles must
suppress sections inside the creator, which is an iframe child until T7.1. The
wave file puts it in wave 5 anyway, and its last done-when is written to
accommodate exactly that: "toggle state propagates into the creator, OR the PR
documents exactly where it does not and why".
It propagates. Both ways, by two separate paths, because they fail differently:
ON THE CREATOR'S OWN BOOT the flags ride on the SOP, which the creator already
reads - ProjectData.pullProject hydrates it from the server. Nothing crosses
the frame boundary at all, so this path is unaffected by B7 either way. It
covers a reload, a fresh tab, the standalone creator page, and a colleague
opening the project on another machine.
WHILE THE FRAME IS OPEN the wizard hands the change straight across
(pushSectionsToCreator -> cw.applySopSections), the same shape T5.3 used for
the dashboard filter. Without it, flipping a toggle would appear to do nothing
until a reload.
T7.1 removes the second path, not the first. That is the whole of the X4
exposure and it is one function, commented as such. Building CR-006 after B7
would not have made the SOP-borne path any different; it would only have saved
writing the hand-off.
What it does
Ten sections, one shared list (html/wp-sections.js) read by the wizard, the
creator's form and the creator's rendered document. Three surfaces meant three
chances to drift, which is how "Assets is off, except in the export" happens.
Off means NOT RENDERED - form, detail view and PDF export. It never means
deleted. renderPackage() was rebuilt from one long string into a list of
(section, html) blocks so a suppressed section leaves no empty heading and the
survivors renumber 1.0, 2.0, 3.0 instead of leaving a hole. The print window
reuses that same HTML, so the export needed no separate change.
Absent means ON. A SOP saved before today mentions no sections, and reading
that as "all off" would blank every project in the estate the moment this
shipped. WPSections.normalize is the one place that decision lives.
html/wp-sections.js new - the shared list, defaults, normalize
html/work-package-suite.html step 12, a 12th rail button
html/work-package-suite-app.js the toggles, state.sections, the hand-off
html/work-package-suite-styles.css the toggle rows
html/wp-creation-index.html stable ids on the five unnamed cards
html/wp-creation-app.js WP_SECTION_NODES, applySopSections,
renderPackage rebuilt as blocks
tests/sections_check.py new - 53 checks
Done when
[x] all 10 sections are toggleable - each one driven off and back on
[x] a section toggled off is absent from the form, the detail view and the
PDF export - checked by content marker, not by heading, so "the section
is gone" and "the section was empty" cannot be confused
[x] toggling off then on restores prior data with no loss - and the sharper
version: a package EDITED while Assets is off still carries its assets
through collectPackage(), which is what Save uses
[x] new SOPs default to all sections on
[x] toggle state propagates into the creator - both paths, separately
Two things worth arguing with
General Information is toggleable, because CR-006 enumerates it. Turning it
off leaves nothing to identify a package by. The row says so in its own note
rather than being quietly excluded from the list.
Location has no card of its own - it is a field inside General Information's
grid, and its toggle governs that one row. CR-004 gives it structured
building/floor/sector fields in wave 6, at which point one line of
WP_SECTION_NODES changes. Written down because "the toggle does nothing" and
"the toggle governs one row" look identical from outside.
Approvals & Sign-offs is NOT toggleable and is not one of the ten. A package
nobody signed is not a shorter package.
Verified one at a time
sections_check 53/53 new
stepper_check 70/70 (STEP_COUNT 11 -> 12)
locations_check 58/58 (its "step 11 is last" check now asserts the thing that
is actually invariant - the wizard's navigation follows)
browser_check 71/71
a11y 22/22
url_state 23/23
autosave 34/34
aggregates 16/16
pipeline 43/43
launcher 58/58
f_items F1-F5 FIXED, F6 REPRODUCES (T7.2)
No colour literal added: still 0 across all page sheets and inline blocks. Each
toggle says its state three ways - the checkbox, the words "In use" / "Not used",
and the rule down its left edge (C1).
Question for the PR, per CLAUDE.md: the toggles are SOP-wide, so a project
cannot use Kitting on install packages and not on BIM ones. BL-000b already
records the field-level version of this question; the per-WP-type version is the
same shape and is not recorded anywhere yet.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| ab3c9e52d1 |
T4.3 - S2: autosave, an unsaved-work guard that means it, and draft recovery
The work package form is ~4,700px tall and had no autosave and no unsaved-work
guard. The only beforeunload listener in the app was analytics dwell tracking, so
a mis-click, a closed tab or a crash lost everything typed since the last Save.
html/wp-autosave.js separates three things this app was conflating:
THE DRAFT what you have typed. Saved locally, continuously, by this file.
THE RECORD what you explicitly Saved, which goes to the project.
THE OUTBOX project-data.js, which gets the RECORD to the server reliably.
This module owns the first only and never writes to the server. A draft is
"unfinished work this browser is holding for you"; pushing unfinished work into a
shared project is a different feature with different consequences.
The guard fires only when the form differs from what was loaded. "Do not fire the
guard when nothing has changed" is in the task because a dialog that appears on
every exit gets clicked through within a day, and is then worse than no dialog.
WIRED: the creator's package form and the SOP wizard's state. Both autosave on a
1200ms debounce, on section/step change, and on visibilitychange - the last being
what makes recovery survive a killed tab, since a crash never fires beforeunload.
The wizard's guard is ADDED alongside trackStepDwell, not in place of it; both
fire and the analytics one does not preventDefault.
THREE BUGS FOUND WHILE BUILDING THIS, all by the probe rather than by reading:
- Dirtiness cannot be "does the form match savedPackages". Those records come
back from the server through serverToPkg() in a LEANER shape - 264 characters
against the form's 1,820 - so a freshly loaded, untouched form differed from
its own record and every single exit would have prompted. Dirtiness is now
measured against a baseline snapshot taken when the form is populated.
- currentView is 'Work Package Form', not 'Form'. My first guard compared
against 'Form' and therefore returned false always: autosave was wired,
registered, and quietly dead. T4.2 had also introduced currentView='Form' in
its popstate handler; that is fixed here too, since it would have broken this
and anything else keyed off the view.
- settled() has to cancel the pending debounce. A save follows typing, so there
is nearly always a write already scheduled; without cancelling it the write
lands a second later and resurrects the draft that was just settled - and the
next load offers to recover work that is already saved.
VERIFICATION. tests/autosave_check.py, 23 checks, all passing:
- typing autosaves unprompted; the draft holds what was typed; it is scoped to
project AND package; and it does NOT appear in the outbox
- an untouched form is not dirty and arms no guard; a typed-in one does
- the draft survives a killed tab and is OFFERED back rather than applied
silently, saying plainly that nothing reached the project, via role=status
- restoring puts the work back in the form
- an explicit save settles the draft, and the probe asserts the save actually
landed first - otherwise the rest of that section proves nothing
- a simulated QuotaExceededError is reported as 'failed' with its reason, not
swallowed; a silent autosave failure is a safety net that is not there
- trackStepDwell still records an event
Two notes for later waves. The fixture's SOP defines no WP types, so
savePackage() legitimately refuses until the probe supplies one - worth knowing
before someone reads that as a bug. And native dialogs hung the headless browser
twice more in this task; with 79 of them in the app, any restore or save path
that reaches one will hang a test rather than fail visibly. S6/S7 in wave 9.
browser_check 71/71, f_items 5 FIXED / F6 REPRODUCES, url_state 23/23.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| b54034db04 |
T4.2 - S3: the app's state has an address; X1 is unblocked
Wave 0 counted pushState across html/ and found 0. Every page read its query
string once at boot and never wrote one again, so you could not send anyone a
link to WP07, a refresh dropped you back at the default view, and Back left the
app entirely because the app had never added a history entry.
CR-011 and CR-014 both promise an email carrying a direct link to a work package.
That is X1, and it was blocked on this. It is not blocked now.
html/wp-url.js is the whole mechanism, and it is deliberately NOT a router.
Nothing in it intercepts navigation or renders anything; it is the query string
treated as state that can be read, merged, written and subscribed to. Pages keep
their own rendering. Query parameters rather than a hash, because the server
already serves these paths and a hash is never sent to the server - which matters
the day a link has to be resolved before the page boots.
The merge behaviour is the part that earns its place: WPUrl.push({wp:id}) keeps
the active project, and WPUrl.push({wp:''}) clears one key without needing to know
what else is in the URL. Hand-built URLs losing ?project= is the usual way this
goes wrong.
WIRED: the creator (open package, dashboard view), the SOP wizard (tool, step),
the launcher (project). Each records a history entry only when the user chose the
change - restoring from the URL uses replace, or Back would immediately add an
entry and appear to do nothing.
WPUrl.absolute() is what CR-011/CR-014 will paste into an email in wave 8.
TWO BUGS THIS TASK CREATED AND FIXED, both found by the probe rather than by
reading:
- bootSOP() calls newPackage() during boot, and newPackage() cleared ?wp=. A
deep link therefore worked and then erased its own parameter, leaving Back
with nothing to return to. Now guarded on wpCreatorReady.
- goToStep() runs validateStep(), which ends in alert() when a required field
is empty - always true on a freshly loaded page. So restoring ?step=3 from a
shared link opened a modal dialog mid-boot, and hung the browser under CDP.
Restoring a view is not a forward navigation and no longer runs the
forward-navigation guard.
The second one is worth keeping in mind for the rest of wave 4: this app has 79
native dialogs, and any of them firing during a restore path will hang a headless
browser rather than fail visibly.
VERIFICATION. tests/url_state_check.py, 23 checks, all passing, covering every
done-when on the task:
- a URL identifying a work package opens that package
- the same URL for a SIGNED-OUT user goes to login, carries the target through
?next=, and lands on the work package itself after signing in
- refresh preserves project, package, tab and view
- Back and Forward move through states, verified as still-initialised rather
than reloaded, and with the dashboard actually rendered rather than only the
URL changed
- a different user opening the same URL reaches the same view
- nothing credential-shaped appears in the query string
Metric 8, pushState: was 0 at wave 0, now 2 in html/ (one pushState and one
replaceState, both in wp-url.js) behind 6 call sites across 4 files. The raw
count stays low by design - one place writes history, which is the same reason
the token work put one place in charge of colour.
browser_check 71/71, f_items 5 FIXED / F6 REPRODUCES, aggregates 16/16.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| ce6fb840f0 |
T3.5 - A5: one button system, and green goes back to being a status
251 buttons across the 7 pages, counted in the browser with every wizard step,
creator section and tool panel forced visible. Two thirds of them are
display:none at load, so a static grep sees about eighty and misses the rest.
FOUR ROLES, defined once in theme-light.css as --wp-btn-*, and no fifth:
primary the one action the screen exists for. Filled accent.
secondary every other real action. White, --border-strong, accent on hover.
tertiary navigating or undoing. No fill, no border, accent text.
danger destructive. Outlined red; filled red only where the control is too
small for an outline to read - the 28px x on a sequence row.
Every button class is mapped to a role in docs/reference/tokens.md section 12.
No value is new: these are the fills the sheets already rendered, given one
definition so that "primary" means one thing.
GREEN IS A STATUS COLOUR AND NO LONGER FILLS A BUTTON. A5 names two green action
buttons; there are four. .use-btn and the launcher's completed-SOP card button
never render green in the default fixture, so the review could not have seen
them - the SOP has to be finished and a suggested value has to be offered first.
.nav-btn.primary "SOP complete" wizard
.btn.btn-generate "Save & view" creator
.use-btn creator
.card.complete .card-button launcher
The green did not go anywhere. .cstatus button.on-cleared, .toggle-btn.enabled,
.wp-nav-dot.ok, .rb-ready, .badge-R and the launcher card's own left border and
status line all still carry it, and every one of those is a state rather than an
action. The launcher card in particular still says "complete" twice after this
change; it just no longer says it on the button.
SENTENCE CASE, applied to buttons and field labels only, which is the scope A5
sets. First word capitalised, the rest lowercased, acronyms and external proper
nouns left alone (SOP, QC, WP, UPN, PM/APM/CM/QM, PDF, JSON, CSV, BIM, MIMO,
Excel, Acumatica).
~30 button labels across launcher, wizard, creator, admin and two scripts
46 field labels
text-transform:uppercase removed from 4 rules - .btn and .add-btn (creator
buttons), label and .cmt-namebar label (creator field labels)
Labels carrying markup - a .req asterisk, a .help-tip chip - had only their text
nodes transformed, so the markup survives and "first word" means the first word
of the label rather than of each fragment. The creator's mono face, 10px size and
tracking are its idiom and are untouched; only the forced uppercase goes.
help.js was updated too. It names "Load Sample" and "SOP Complete" in prose, so
renaming the buttons without it would have left the help centre describing
controls that no longer exist. That coupling is the only place in the app where
button text is referenced by name.
Verified by re-running the inventory: 0 green action buttons, 0 uppercase button
labels, 251 buttons still present - nothing was lost in the rename.
console.css card headers are unchanged, confirmed by diff: the only six lines
this task touches in that file are token substitutions on button/button.primary/
button.danger, none of them within twenty lines of .card h2.
f_items 5 FIXED / F6 REPRODUCES. browser_check 71/71.
Left alone and logged: .step-tab is still uppercase (BL-015) - it is a stepper
tab, neither a button nor a field label, and A4/S9 rebuild the stepper. Table
headers, section eyebrows and headings keep their case throughout. BL-008 and
BL-009 were re-targeted from T3.5 to wave 9: both are colour merges on a field
fill and a status pill, and this task is scoped to buttons.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| 05aa67ff32 |
T2.2 (part 2) - B1/S4/F2: delete the flat strip, unify the brand
Completes T2.2. The flat strip was #wp-usermenu, built in auth-guard.js and appended to every bar: "Root . Admin . Users . Language & time . Password . Sign out". It duplicated Admin, Users and Sign out from the drawer, and being one unbreakable 412px run it was also the thing that clipped the bar at 390px. Deleting it is what resolves F2 for real, exactly as the wave predicted. Its two unique items moved into the drawer rather than being lost with it: Language & time and Password now sit under an Account section. They open dialogs rather than navigating, so they render as <button data-action>, not links - which also removes three fake `<a href="#">` entries whose only job was to be clicked. The creator's jump-link count goes 3 -> 0 for that reason. The drawer closes before the dialog opens, so its scrim is not left over the thing you just asked for. wpPreferences and wpChangePassword are untouched, so A7's localization feature is intact - it moved, it did not go. buildUserMenu, addLogoutPill, isDarkBg and the floating-pill fallback are all gone; grep finds no reference to any of them. The fallback is not needed because every signed-in page now mounts the drawer. The T1.2 interim went with them rather than being layered on - the element it wrapped no longer exists. Also removed the Field View's "Home" link, which the drawer's first entry and the brand beside it both already offered, and replaced the creator's mono wordmark with the shared logo chip. The creator was the only page in the suite spelling "Prime Controls" out in monospace instead of showing the mark; its .header-logo rule and the 480px override for it are deleted. Deliberately kept: the launcher's Overview / Feedback / Help links. Those are in-page anchors and a help dialog belonging to that page, not global navigation, so they are not the strip and the drawer does not duplicate them. Verified on all 6 pages at 390px and 1440px: no #wp-usermenu anywhere, no bar control crossing the viewport edge at either width, the logo chip present on every page including the creator, and the same 10-entry drawer everywhere. The bar is back to 48px at 1440px on five of six pages. F2's probe reports the bar at 2 rows instead of 4. Both migrated actions verified to open their real modals (wp-prefs-modal, wp-pw-modal) with the drawer closed behind them. browser_check 71/71. f_items: F1-F5 FIXED, F6 untouched. T2.3 (B2, switcher breakpoints) is still open. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
|||
| d3d2a46922 |
T2.2 (part 1) - S4: mount the shared drawer on the launcher, SOP wizard and creator
PARTIAL. This is the mounting half of T2.2 and it closes S4. The other half -
deleting the flat nav strip, unifying the brand treatment, and removing the T1.2
interim - is NOT in this commit. See below.
S4 is that global nav was missing on the two pages people actually live in. The
drawer already handled everything needed to fix that: it self-mounts into
.wp-appbar OR .header, gates its links by role, carries the active ?project=,
and returns early inside an iframe. So this is two tags per page, not a port -
the component was built for this and was simply never included.
Verified on all 6 pages at 390px and 1440px: the menu button and the drawer
exist, both carry the same 8 links, the drawer opens fully on screen, its first
link is hit-testable via elementFromPoint rather than merely present, aria-hidden
flips correctly, and Escape closes it. Drawer links measure 44px tall, which is
the tap-target size T2.2 asks for on the Field View.
The embedded creator correctly does NOT get a second drawer: wp-sidenav.js
returns early when framed, and the SOP wizard hosting it already has one.
Deliberately NOT done here, and still open on T2.2:
- the flat nav strip is not deleted, so the drawer and the strip currently
duplicate Home, Admin, Users and Sign out
- the creator's mono wordmark is not yet unified to the logo chip
- the T1.2 interim is still in place and must be removed, not layered on
Splitting it this way keeps a working app at every commit: mounting is additive
and regression-free, whereas deleting the strip changes where several
destinations live and wants its own diff. T2.3 (B2 breakpoints) is untouched.
browser_check 71/71. f_items unchanged: F1-F5 FIXED, F6 untouched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
|||
| e3527a6e1d |
Act on the fragility audit: boot-order crash, real cache correctness, deep links
A 55-agent audit of the last few commits confirmed 32 findings. The high and medium ones are fixed here; the ranked leftovers are listed at the end. Boot-order crash (my regression, wave 2) - wp-format.js loaded AFTER wp-creation-app.js on every page, but the creator boots synchronously at parse time and its comment renderer calls wpFormatDateTime(). With any review comment present that threw a ReferenceError and aborted the rest of boot. The formatter now parses before the app scripts on all five pages. Verified with a comment seeded: the date renders and boot completes. The network-first fix didn't actually work - `fetch(req)` inherits the request's default cache mode, so it consults the browser HTTP cache — the previous commit's "network-first" still allowed a page to run against a stale sibling. Code is now fetched with cache:'no-cache' and precached with cache:'reload'. - Nothing pinned freshness on the wire either: no Cache-Control anywhere, so browsers applied heuristic caching (~10% of a file's age) and each file expired at a different moment. NGINX and the dev server now send no-cache for html/css/js/ webmanifest; images stay cacheable. Verified on the wire. - Non-ok responses were returned verbatim, so a 502 broke pages the cache could have served; they now fall back to the cache. Cache keys drop the query string, which fixes both the offline miss on every in-app link (?project=…&tab=…) and unbounded cache growth. respondWith can no longer resolve to undefined. Cache bumped to v5. Embedded creator - Dropped the &t=Date.now() cache-buster and made the frame's identity the PROJECT. The view and which package to open are now applied by calling into the loaded document, so switching tabs no longer reloads it — that reload discarded unsaved form edits, made the creator unreachable offline, and stored a fresh copy per click. - ?view=dashboard was re-read on every tab switch, so after one deep link the "Work Package Creation" tab kept opening the Dashboard for the rest of the session. Deep-link params are consumed once now. - ?wp=<id> — which the global search has been emitting since wave 2 — was read by nothing, so picking a work package in search opened a blank one. The creator now exposes openWpById() and the shell applies it after a new 'wp-creator-ready' event, because the frame's load fires before pullProject() resolves. - Math.max(320,…) could make the frame taller than the space available while page scrolling was disabled, pushing content off a window that couldn't scroll. Full-bleed is now only used when at least 460px remains, and the SOP-incomplete gate never runs inside it. A ResizeObserver re-measures when wp-chrome.js grows the app bar. Contract drift - .field-hint and .user-pick are used on the SOP suite page but their only rules lived in wp-creation-styles.css, which that page doesn't link — the CM hint and the sign-off pickers had no styling at all. Rules added to the suite's stylesheet. - The creator's critical floor now also hides modal overlays (a stale stylesheet rendered their contents inline in the form) and gives the jump bar a sane sticky top. - login.js dereferenced ids unguarded where the old version guarded, so a cached older login.html would break sign-in itself. Guarded. - The "Language & time" menu item was added only if wp-format.js had already parsed; the check now happens at click time. Verified: 157 API checks across five suites on a clean database, plus 22 driven UI checks — boot-with-comment, tab switching with a no-reload probe, short-viewport fallback, and the search deep link landing on the right package. Not done, ranked: ~50 dead CSS rules across three stylesheets; dead .team-pick and .constraint-option contracts; wp-chrome.js's documented '.header' mount branch is unreachable because the creator loads neither wp-chrome.js nor its CSS; the squeeze half of the embed layout (.content-area.embed-full) is still CSS-only, which degrades to the old narrow column rather than breaking; fingerprinted asset URLs would make a mismatched pair unrepresentable rather than merely unlikely. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
|||
| 917a728399 |
Rebuild the work-package side panel in the style of MS Planner
The auto-hiding drawer was the wrong model — a list you navigate by shouldn't appear and disappear under the pointer, and its vertical text tab read as a stray artifact. Replaced with a persistent side panel following the Planner reference: - Collapse toggle at the top (the panel glyph, arrow flips), remembered across visits. Collapsed leaves a 56px icon rail where the coloured package badges are still clickable, rather than hiding the list entirely. - One primary action: "+ New work package" with a split caret for Duplicate, Split by discipline and Export all. - Icon nav with counts: My packages (owned by you), All packages, Needs attention (on hold or not release-ready), Dashboard. These filter the list below. - Packages as rows with a colour-coded initial badge, number, subject and readiness state, still grouped by status, with a left accent bar on the current package. The badge colour is hashed from the WP number, so a package keeps its swatch instead of shuffling when another is added or deleted. - The panel sits IN the layout: the form and the full-width chrome shift beside it rather than being overlaid. Also, the reason it appeared as loose unstyled widgets in the middle of the form: the panel's markup and its stylesheet are cached independently, so a browser can run new markup against old CSS. Its essential layout (fixed position, width, the row/badge flex, the collapsed rules) is now injected by wp-creation-app.js as a floor, inserted first in <head> so the stylesheet still wins on everything it defines. Same lesson as the iframe: a component whose CSS-missing state is "broken" rather than "plain" must carry its own critical layout. Verified with 25 driven checks in headless Chrome: persistence, the four nav links, badge colours and text, view filtering, collapse/expand, the split menu, row selection and highlighting — and, with wp-creation-styles.css removed from the page entirely, the panel is still a fixed 288px side panel with the form shifted beside it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
|||
| fcba74b584 |
Fix the WP navigator and the squeezed embedded layout; add per-project permissions
Layout — the reported "skinny scrolling windows" - .content-area capped the whole suite at 1000px, so on a 1920 screen the embedded Work Package Creator ran in a ~930px column with its own scrollbar inside the page's. The wizard now caps at 1700px and the Creator/Dashboard tab goes full-bleed: the iframe fills the window below the app chrome and owns the only scrollbar. Needed `flex: none` on the content area — as a `flex: 1` item its flex-basis overrode `height`, leaving the used height indefinite so the child's `height: 100%` collapsed the iframe to its 150px default. - The SOP wizard's fields were one per row; they now flow into ~340px columns. Navigator — now an auto-hiding drawer - It was a fixed 262px column that stole width from the form AND was hidden below 1100px, so embedded (the normal path) it never appeared at all — that's the "broken side menu". It's now an overlay drawer behind a slim always-visible edge handle: hover or tap to open, move away / Escape / pick a package to close, or pin it to keep it open (pinned shifts the form and the page chrome across, and is remembered). A gutter keeps the handle off the section-nav chips. Bugs found while checking the site over - collectStepData() still read the SOP team fields as text inputs, but wave 1 made them account pickers — so it wrote a user ID into state.team.pm where the display NAME belongs, and the SOP would print `user_ab12…` as the PM. Now synced properly from the pickers. - loadSampleData() set .value on those selects with fictional names; setting an unmatched value on a <select> silently does nothing, so the sample lost its team. It now stores them as names without an account, which the picker shows as "(no account)". - My earlier CSS block replacement had deleted the SOP-chip, people-picker and critical-tag styles. Restored. Same picker everywhere the SOP names someone - Sign-off roles (step 3, required and optional) are account pickers now, storing userId alongside the name, so a signature belongs to an account that can be notified. Titles stay free text. Per-project permissions (asked for: "change project permissions for individual users") - project_members.role overrides the account's role on that project, so a PM on one job can be a Project User on another. Empty = inherit; app admin is admin everywhere. effective_role() feeds require_project_admin, so WP delete, completed- SOP edits and project delete are all judged per project. - Project access is now its own column in the admin console (it was buried among the action buttons, which is why it couldn't be found), showing the project count per account; the dialog sets access plus the role on each project. - The members endpoint reports each person's effective role on that project. Verified: 157 API checks across five suites on clean databases (44 permissions + 22 password reset + 34 search/localization + 39 gates/notifications + 18 new per-project permission checks), 16 drawer-behaviour + 4 pinned-mode UI checks driven in headless Chrome, and probes confirming the team/sign-off pickers populate and no longer corrupt state.team on step navigation. Screenshots reviewed at 1920x1080. Service-worker cache bumped to v3 so browsers pick up the new shell. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
|||
| b38348e6ae |
Wave 3: predecessor references with a release gate, and critical-constraint reopen alerts
Predecessors are real references now - data.predecessors holds work-package ids, replacing a free-text SOP phase label that couldn't express "WP04 waits on WP02" and gated nothing. The SOP phase survives beside it as the descriptive "Sequence phase" field. - readiness() has two gates: constraints clear AND every predecessor Closed. The banner, sticky bar, left rail, dashboard Gates column and the ready counters all reflect the second one. - Enforced server-side by enforce_release_gates() on every path that sets a status — the plain upsert included, since that's how the browser and the offline outbox save. /issue and /status would otherwise have been ways around it. - Cycles are refused directly and through a chain, with a message naming the package that already waits on this one. The Creator's picker also hides itself and its own descendants, so a cycle is hard to build in the first place. - A deleted predecessor does not block: it would freeze everything downstream of a package someone removed. - The gate is refusable, on purpose. Planners release ahead of upstream close-out, so an explicit reason (data.gateOverride) allows it, gets a gate_overridden audit event naming what was skipped, and prints on the package. A blank reason is not an override, and changing the predecessor set clears it. The dashboard won't release a blocked package at all — it points at the form where the reason is captured. Critical constraints reopened after release - Reopening a SOP-critical constraint on a released package emails the owner, PM, CM and the package's distribution list (minus whoever did it) and writes a constraint_reopened audit event. - Detected by diffing the incoming constraints against the stored ones inside the normal upsert rather than via a new endpoint: the sync outbox only replays POST /api/wps, so a dedicated route would be lost offline. It fires only on a real cleared→open transition, so re-saving an already-open constraint doesn't re-announce, and never before release or for a non-critical constraint. - Bodies carry the constraint name, WP number and a link — never package contents. Verified: 139 API checks on one fresh database (44 permissions + 22 password reset + 34 search/localization + 39 gates/notifications), including every bypass path, cycle shapes, the deleted-predecessor case, blank-reason overrides, and the four recipients confirmed both in the outbox and on the wire against a local SMTP sink. 27 driven UI checks against the real Creator page in headless Chrome covering the picker, the override prompt (accept and cancel), override invalidation, the cycle exclusions and the dashboard refusal. Screenshots reviewed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
|||
| 61d1cf4bff |
Wave 2: form cleanups from the site comments, plus localization, project switcher and global search
Site comments (8/3) - BIM card: LOD removed, IFF # added next to the coordination status, and required once that status is "Signed off (IFF)" — an unnumbered sign-off isn't traceable. A LOD already stored on a package is preserved and shown as legacy, not blanked. - The blue "from SOP types" subtext under a field is now a SOP chip on the label with the detail in a tooltip. The chip stays visible rather than hover-only: field tablets have no hover, and "this came from the SOP" is the part that matters. The hint elements stay in the DOM (hidden) so the code writing to them keeps working; an observer mirrors their text into the tooltip. - Specification Section is no longer typed per package. Each WP type carries a spec section on the SOP; the field is read-only in the Creator and follows the type, with the SOP's spec folder linked underneath. This reads both spec comments as one intent — stop typing it, derive it. - Assignees and Distribution are multi-selects over the SOP project team, showing each person's job function, with the CM pre-added to Distribution (removable per package) and a free-text option for people with no account. The stored display strings are unchanged so print/export/dashboard keep working; account ids ride alongside for the notification work in wave 3. Localization + time - Per-user locale/timezone (Language & time in the user menu), an app-wide default in the admin console, then the browser. Timezones are validated against the server's zoneinfo and the picker is fed from it. Calendar dates are formatted from their parts so a due date never reads a day early in another zone. - Every displayed timestamp now goes through the shared helpers. Top-bar chrome - Project switcher beside the logo and a centered global search, injected into either generation of top bar; skipped in an iframe so the embedded Creator doesn't get a second one. Ctrl/Cmd-K focuses search. - GET /api/search covers work packages, projects and SOPs, scoped to the caller's projects, hiding archived packages, with LIKE wildcards escaped. Fixed along the way: showForm() cleared every card's inline display, which undid applyKind() — so the Package Type and BIM cards reappeared on an install-only project. Split out applyKindVisibility() and re-apply it there. Verified: 100 API checks on a fresh database (44 permissions + 22 password reset + 34 search/localization), 24 driven UI checks against the real Creator page in headless Chrome (SOP chips, both people pickers, spec auto-fill, critical tags, BIM suppression), and the chrome harness on both bar styles. Screenshots reviewed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
|||
| 1d004cab75 |
Widen the IWP screen and add a left work-package navigator
The Work Package form was capped at a 1000px column, which wasted most of a desktop screen, and the only way to reach another package was to scroll to the Saved table at the bottom. - Put the form in a wide two-column shell (max 1760px); ctx-bar, mode-wrap and the release banner widened to match. - Above 1200px the two-up field grids flow to 3-4 columns instead of stretching two fields across the whole card. Narrow layouts are unchanged. - New sticky left rail listing every saved package, grouped by status in field order, with WP number, subject, readiness dot and type. Click to open it in the form; the package being edited is highlighted. Filter box, + New and Dashboard shortcuts, collapsible (state persisted), hidden under 1100px where the Saved table still covers navigation. - The rail re-renders from renderSavedList(), so saves, deletes, splits, archive/restore and the project pull all keep it current. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
|||
| 39b48055ff |
Productionize WP Suite: auth, security hardening, sync, dashboard, PWA, email
Brings the Work Package Suite from a browser-local prototype to a multi-tenant, SQL-backed deployment hardened for customer IP. Auth & access control - Local username/password login (bcrypt + JWT in an HttpOnly cookie), admin-managed users, per-project membership, and project-scoped API access. - Admin console: change user roles, view the audit trail, manage settings. Security hardening - CSP / HSTS / X-Frame-Options / nosniff headers in nginx; Secure cookie via X-Forwarded-Proto; CSRF Origin check; attribute-safe output escaping. - Login lockout, token_version session revocation, stronger password policy, fail-closed secret loading, encrypted (AES-256) database backups. Persistence & schema - SOPs and Work Packages are now DB-backed and shared across users, written through a durable client sync outbox that queues offline edits. - Alembic migrations applied automatically on container start. New capabilities - Phase 2 dashboard (progress, gating, pagination, archive). - Phase 3 PWA "Field View" with offline caching and auth fallback. - WP owner assignment with OPTIONAL email notifications, OFF by default and toggled from the admin console. SMTP password is read only from the SMTP_PASSWORD env var (never stored); emails carry a WP number + deep link, never customer IP. Also: IBM Carbon restyle, Help section, and DEPLOYMENT.md brought up to date. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 0e698438a2 |
BIM as a per-package kind; one project flows BIM -> construction
Replace the whole-project BIM 'mode' with an opt-in capability + a per-package kind, so a single project can produce both model and install packages (and install-only projects are unaffected). SOP tool: - Step 4 "Include BIM / VDC work packages" checkbox (state.bimEnabled). Enabling adds BIM package types + BIM release gates (flagged bim) plus BIM roles/sources/process steps alongside the construction defaults; disabling strips the bim-flagged items. - Generated SOP carries bimEnabled and a per-type / per-constraint bim flag. - Required sign-off role titles stay editable (no longer force-renamed). Work Package Creator: - Shows a Package Type selector (Install IWP / BIM EWP) only when the SOP has bimEnabled; kind is saved per package and labeled in the output. - WP types and release gates are filtered by kind (BIM types+gates for EWP, install types+gates for IWP). - EWP reveals the BIM Details card and hides controls.dev Assets / Materials / Kitting-MIMO; IWP shows those plus the "Enabled by - BIM package" traceability link. Supersedes the earlier whole-project BIM mode. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 566ace9969 |
Add BIM/VDC work packages, platform links, and AWP traceability
SOP tool: - "Load BIM / VDC template" (Step 4): one click sets BIM deliverable types, install-phase disciplines, BIM release-gate constraints (with EN06 citations), the BIM process sequence, reference sources, BIM sign-off roles, and MWP##-[Area]-[PHASE] numbering. Tags the SOP mode as 'bim'. - Step 3 required sign-off role titles are now editable (default Superintendent/Foreman); the BIM template sets them to BIM Coordinator and Construction Lead (CRS). - Step 7: capture a project-homepage link for the chosen tracking and commissioning platforms. Work Package Creator: - BIM mode (SOP.mode==='bim'): hides controls.dev Assets, Material List, and Kitting/MIMO; shows a BIM Details card (LOD, model area, clash / coordination status, linked scan). - Project tracking/commissioning links are copied onto every WP and shown in the WP output. - "Enabled by - BIM package(s)" field links a field IWP back to the BIM package that enabled it (EWP -> IWP traceability). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 20afb0e565 |
Add secure username/password login portal
Gate the suite behind a self-contained login (no external IdP): - User model with bcrypt-hashed passwords; admin/user roles - /api/auth endpoints: login, logout, me, change-password, and admin-only user management (list/create/delete/reset/enable) - Stateless JWT session in an HttpOnly, SameSite=Lax, auto-Secure cookie; middleware refuses every /api data route without a session - login.html + auth-guard.js: login page and per-page guard with a top-right "name / Admin / Sign out" pill - Admin Console now gated on admin role (passphrase gate removed) with a User administration card - manage_users.py CLI to bootstrap the first admin - Rebuilt help.js into a searchable, multi-topic help center - Local-dev convenience: app serves html/ so the site + API share one origin under uvicorn (inactive in the prod container) - Docs/env: AUTH_SECRET_KEY, requirements (bcrypt, PyJWT), README Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| e5f77846ad |
GUI polish: Help section, tooltips, sticky save bar + section nav, dashboard filters
- Help: shared help.js injects a Help modal (workflow + key concepts) and the .help-tip tooltip component. "❔ Help" added to the suite header and home nav. - Tooltips: ⓘ hover hints on the trickiest fields (WP number auto-build, disciplines, scope/split, constraints, materials-by-discipline, discipline strategy, split threshold). - WP creator: sticky section-nav jump chips at the top and an always-visible sticky save bar (Save Draft / Save & View) showing live release readiness. - Dashboard: metric cards (Release-ready / On hold / Overdue / Total) and the status chips are now clickable filters for the board. - Consistent colored status pills in the dashboard board and the saved list. Theme unification (home Carbon vs tools palette) intentionally left for a separate pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 561d4f2408 |
Menu/UX cleanup: cost codes, Duplicate WP, condensed toolbars, Dashboard tab
- Cost codes: drop everything after 4990 (material/quality/admin codes removed). - WP creator: add "Duplicate" (asks how many copies; each a clean Draft with unique number/subject, approvals & closeout cleared). When embedded the WP toolbar now shows only New + Duplicate. - Condense duplicated toolbars: the embedded creator's Usage Data, Load Example/ Sample SOP, Comments, View SOP and Dashboard buttons are hidden; the suite's top-right "Usage Logs" and "Load Sample" are the single instances. - Load Sample is context-aware: SOP tab loads the sample SOP, WP/Dashboard tab loads the example Work Package in the creator. - Dashboard moved to a nav-tab next to SOP Configuration / Work Package Creation. - Remove "Prime Controls" branding from the embedded WP menu. - Remove "Bill Clarida" from the example WP distribution and the step-comments name placeholder. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 3c40b58ff8 |
Add multi-project support: projects entity, picker home page, project context
Projects become the top-level container; SOPs and Work Packages belong to one. Backend: - New projects table + CRUD (/api/projects). - sops.project_id (FK, cascade) and work_packages.project_id added; list/latest/metrics endpoints accept a project_id filter. Front end (now under html/): - project-data.js: shared API-first ProjectData adapter with localStorage fallback + active-project helpers. - Home page: removed "About This Suite"; added a Project picker (create / use sample / select). Tool cards stay hidden until a project is active and carry &project=<id>; hero shows the active project. - Suite reads ?project, resolves it, shows it in the header, and prefills the SOP project fields; passes &project into the WP-creator iframe. - WP creator stamps projectId onto saved packages. SOP/WP localStorage is not yet namespaced per project (next step). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
|||
| 4d111d608d | Merge branch 'main' into feat/wp-discipline-split-dashboard | |||
| fd668f0ea2 | Move static files into html/ for Docker bind mount |
